Tasco Air Gun 2-7×32 Rifle Scope Review

Let Me Tell You About the Tasco Air Gun 2-7×32 Rifle Scope

For years, my workshop and various outdoor excursions have demanded reliable optics that can withstand a beating. When it came to outfitting my air rifles, the recoil impulse has always been a particular challenge for scopes. This is precisely why I found myself looking into the Tasco Air Gun 2-7×32 Rifle Scope. Tasco has a reputation for developing gear specifically to handle the unique stresses of airgun platforms, which are notoriously tough on optics.

My previous experience with another air rifle was, frankly, a nightmare. The factory scope, bundled with a Gamo air rifle that boasted an impressive 1350 FPS, was an absolute disaster. It failed to hold zero, the rings it came with seemed insufficient, and eventually, the windage crosshair visibly shifted lower than the elevation. This rendered the rifle practically useless for any kind of accurate shooting. After countless hours trying to rectify the issue with advice from gunsmiths, it became clear that the scope simply couldn’t cope with the rifle’s capabilities.

When the Tasco scope arrived, my first impression was one of quiet optimism tinged with a healthy dose of skepticism born from my prior frustration. The Tasco Air Gun 2-7×32 Rifle Scope felt solid enough in hand, with a matte black finish that didn’t scream “budget” but also wasn’t trying to be something it wasn’t. It looked like a purpose-built tool, and the inclusion of dovetail rings with a stop pin was a welcome sight, suggesting a bit more thought put into secure mounting. I had considered a few other brands, but the specific mention of airgun recoil in the product description for this Tasco model was the deciding factor. My immediate feeling was one of hopeful anticipation – could this finally be the solution to my airgun optic woes?

Real-World Testing: Putting Tasco Air Gun 2-7×32 Rifle Scope to the Test

First Use Experience

I mounted the Tasco Air Gun 2-7×32 Rifle Scope onto a reasonably powerful spring-piston air rifle, one known for its significant “kick.” The initial setup with the provided rings was straightforward, and the stop pin felt reassuringly firm against the rifle’s dovetail rail. The field of view at the 2x setting was quite generous, offering a good sense of my surroundings, which is always appreciated when I’m not actively sighting a target. Adjusting the magnification to 7x brought targets closer, and the image remained reasonably sharp for the intended purpose.

I conducted my initial testing at my usual outdoor shooting area, a familiar patch of woods behind my property. Conditions were fair, with a slight breeze and clear skies, typical for an afternoon range session. The fully coated optics seemed to gather light well, providing a bright enough image even as the sun began to dip slightly lower in the sky. I found the fast focus eyepiece to be quite responsive, allowing for quick adjustments to ensure a clear sight picture. No immediate issues arose, no wobbling, no apparent looseness – a promising start compared to my previous disastrous experience.

Extended Use & Reliability

After several weeks of regular use, interspersed with various workshop tasks that required precise aiming for minor adjustments, the Tasco scope has held up surprisingly well. I’ve used it on different air rifles, including one that is known to be particularly hard on scopes, and it has continued to maintain its zero with impressive consistency. The scope has endured being moved between firearms, occasional bumps against my workbench, and exposure to the ambient humidity typical of my workshop environment. It has not shown any signs of internal fogging or degradation in optical clarity.

Cleaning and maintenance have been minimal, which is precisely how I like my gear to be. A quick wipe with a microfiber cloth to remove dust or fingerprints from the lenses is all that has been necessary. The matte black finish has resisted superficial scratches, and the turrets still click with a satisfying, albeit basic, tactile feedback. Compared to the cheap, throw-away scopes that often come bundled with airguns, this Tasco unit feels significantly more robust and reliable. It hasn’t come apart or shifted zero, which frankly, given its price point and intended application, is a significant win.

Breaking Down the Features of Tasco Air Gun 2-7×32 Rifle Scope

Specifications

The Tasco Air Gun 2-7×32 Rifle Scope is designed to meet the demands of airgun shooting, which presents a unique recoil profile. It features a 2-7x variable magnification, allowing for flexibility from closer-range observation to medium-distance target acquisition. The 32mm objective lens diameter is standard for this class of scope, balancing light-gathering capabilities with a relatively compact profile.

Its 1-inch tube diameter is typical for many rifle scopes and accommodates standard mounting rings. The reticle is a Truplex design, a simple yet effective crosshair with thicker outer posts and a finer inner cross, offering good visibility for various shooting scenarios. The fully coated optics are designed to reduce glare and improve light transmission, contributing to a brighter and clearer image.

For shooter comfort and consistent sight acquisition, the scope offers a 4.3-inch eye relief. This is crucial for air rifles where the shooter might not always be in a perfect shooting stance. The fast focus eyepiece allows for rapid adjustment to achieve a sharp image tailored to the user’s vision.

Key specifications include:

• Magnification: 2 – 7x (Variable)
• Objective Lens Diameter: 32 mm
• Reticle: Truplex
• Tube Diameter: 1 in
• Exit Pupil: 11.1 mm (at 2x magnification)
• Finish: Matte Black
• Eye Relief: 4.3 in
• Optical Coating: Fully Coated
• Parallax Setting: 100 yards (fixed)
• Weight: 14.7 oz (417 g)
• Length: 11.3 in (287 mm)
• Windage/Elevation Adjustment: .25 MOA per click

The 100-yard parallax setting is a fixed characteristic, common for scopes in this price range and designed for typical airgun ranges. The matte black finish helps reduce glare in various lighting conditions. Finally, the weight of 14.7 ounces and length of 11.3 inches make it a manageable addition to most air rifles without being overly bulky.

Performance & Functionality

In terms of its core function – providing a magnified view and holding zero – the Tasco Air Gun 2-7×32 Rifle Scope performs admirably, especially considering its price. The variable magnification is smooth to operate, and the detents are well-defined, ensuring you can easily select your desired power. The clarity of the fully coated lenses is surprisingly good for the cost, offering a clear picture at both the low and high ends of the magnification range.

The most critical aspect for an airgun scope is its ability to withstand the unique recoil, and this optic has passed that test with flying colors during my extended use. It has consistently held its zero across multiple firearms and various shooting sessions. The .25 MOA click adjustments are repeatable, meaning that after sighting in, you can trust that your adjustments will translate accurately to point of impact.

One area where it meets expectations but doesn’t necessarily exceed them is the parallax. The fixed 100-yard setting is suitable for many airgun scenarios, but for extreme close-quarters or longer-range airgun shooting, an adjustable objective would be preferable. However, for the intended use case of general airgun plinking and pest control at typical ranges, it functions perfectly well.

Design & Ergonomics

The design of the Tasco Air Gun 2-7×32 Rifle Scope is practical and functional. The matte black finish is not only aesthetically pleasing but also practical for reducing reflections in the field. The housing feels sturdy, and the overall build quality suggests it can handle the rigors of airgun use.

Ergonomically, the scope is straightforward. The magnification ring is easy to grip and turn, even with gloves on. The fast focus eyepiece is a welcome feature for quick target acquisition, allowing you to dial in your sight picture without fumbling. The turrets for windage and elevation adjustments are tactile and provide positive clicks, making them easy to use even without looking directly at them.

While it doesn’t boast premium materials or intricate machining, the construction is solid. The 1-inch main tube is standard and accepts a wide variety of mounts. The provided dovetail rings are a thoughtful inclusion, ensuring that users can get started right away without needing to purchase additional mounting hardware.

Durability & Maintenance

Based on my experience, the durability of the Tasco Air Gun 2-7×32 Rifle Scope is a significant strong point, especially considering its price bracket. It has proven itself to be resistant to the jarring recoil of various airguns, a testament to its internal construction. I haven’t encountered any internal fogging, lens separation, or mechanical failures.

Maintenance is about as simple as it gets for an optic. Regular cleaning of the lenses with a soft, lint-free cloth and a suitable lens cleaner is sufficient. The matte finish resists minor abrasions quite well, though it’s always prudent to handle optics with care. There are no complex external parts that are prone to breaking or difficult to clean.

The overall impression is that this is a scope designed for reliable function over a long period of use, without requiring extensive upkeep. It’s a tool built to perform its duty without fuss.

Accessories and Customization Options

The Tasco Air Gun 2-7×32 Rifle Scope comes with a useful set of accessories to get you started immediately. Most notably, it includes a pair of dovetail rings with a stop pin. This stop pin is particularly important for airgun applications as it helps prevent the scope from being driven backward by recoil.

Beyond the included rings, the scope itself doesn’t offer much in the way of direct customization, which is typical for this type of optic. The reticle is fixed, and the parallax is set at 100 yards. However, the 1-inch tube diameter means it is compatible with a vast array of aftermarket scope mounts, rings, and accessories from other manufacturers. This allows users to tailor the mounting solution to their specific rifle and shooting preferences.

While it doesn’t come with lens caps, this is a common omission for scopes in this price range. Users looking to protect the lenses would need to purchase those separately.

Pros and Cons of Tasco Air Gun 2-7×32 Rifle Scope

Who Should Buy Tasco Air Gun 2-7×32 Rifle Scope?

This optic is an excellent choice for anyone who owns an air rifle and is tired of scopes that fail to hold zero or fall apart due to recoil. It’s ideal for plinkers, backyard shooters, and those using their airguns for light pest control or target practice. The Tasco Air Gun 2-7×32 Rifle Scope is perfect for users who want a reliable, no-nonsense optic that won’t break the bank.

Individuals who require extreme long-range precision or need adjustable parallax for shooting at very short distances might want to look at more specialized, higher-end options. However, for the vast majority of airgun enthusiasts seeking a dependable optic that can handle the specific demands of their firearms, this scope is a superb fit. I would highly recommend investing in a good set of microfiber lens cloths and a quality lens cleaner to keep the optics in top condition.

Conclusion on Tasco Air Gun 2-7×32 Rifle Scope

The Tasco Air Gun 2-7×32 Rifle Scope has proven itself to be an outstanding performer, especially when one considers its modest price tag. It delivers on its promise of airgun durability and provides a clear, usable optical experience that far surpasses many similarly priced alternatives. My personal frustration with inadequate scopes was significantly alleviated by this Tasco unit, which has held its zero reliably across multiple air rifles and countless shots.

The value proposition here is undeniable; you get a scope that is built to survive the unique recoil of airguns, complete with useful features like a fast focus eyepiece and the necessary mounting hardware. For anyone looking for an affordable, yet robust and reliable optic for their air rifle, I can confidently recommend the Tasco Air Gun 2-7×32 Rifle Scope. It’s a no-frills workhorse that gets the job done, providing a much-needed upgrade from the often subpar optics found bundled with many airguns.