Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight Review

Inside the Experience: Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight

For a firearms enthusiast, the ability to accurately and reliably mount an optic to a handgun is paramount. My search for a robust mounting solution for my EAA Super Sight, specifically for the Leupold DeltaPoint Pro footprint, led me to the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight. This particular mount aims to bridge the gap between common reflex sight footprints and the dovetail system of the EAA Super Sight, offering a direct, no-fuss adaptation.

My previous experience involved a more involved milling process to achieve a similar mount, which was both time-consuming and costly. The promise of an “easier than ever” installation with this Evolution Gun Works mount, specifically designed to avoid significant increments, was a major draw. I was looking for a straightforward way to upgrade my sight setup without compromising the firearm’s integrity or voiding warranties, which often happens with custom slide modifications.

Upon first inspection, the mount presents a solid, utilitarian appearance. Machined from what feels like durable aluminum, it has a satisfying heft without being overly heavy. The matte black hard coat anodized finish promises good resistance to wear and tear, a critical factor for any component destined for a firearm. My initial impression was one of quiet confidence; it felt like a well-engineered piece of equipment designed for its purpose.

I briefly considered some universal dovetail adapter plates, but they often required significant fitting or shim work, which I wanted to avoid. The direct compatibility claimed for this specific EAA Super Sight dovetail made it stand out as the cleaner solution. My first reaction was one of hopeful anticipation for a simplified upgrade path.

Real-World Testing: Putting Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight to the Test

First Use Experience

I tested this mount on my range bench, specifically during a dedicated session to zero a new optic. The primary goal was to install the mount, attach the Leupold DeltaPoint Pro, and then proceed with live-fire accuracy testing. The environment was a controlled indoor range, offering stable conditions without extreme temperatures or moisture.

The installation process was indeed straightforward. The progressive taper design of the mount meant it slid into the EAA Super Sight dovetail with relative ease, requiring only a few light taps with a nylon punch. Once seated, it felt secure, and the subsequent mounting of the Leupold DeltaPoint Pro was seamless, aligning perfectly with the mount’s footprint.

No significant issues or surprises arose during the initial installation. The mount locked into place with a satisfying snugness, and the optic sat flush and stable. It immediately felt like a reliable platform for the red dot sight.

Extended Use & Reliability

After several range days and a few hundred rounds downrange with the optic mounted, this Evolution Gun Works mount has held up admirably. It has remained precisely where it was installed, showing no signs of shifting or loosening. The finish continues to look robust, with no noticeable scuffs or chips despite being handled and potentially bumped lightly during transport.

Durability has been excellent so far. There are no visible cracks, no stiffness in its seating, and certainly no performance drop related to the mount itself. It behaves as if it were a factory-integrated part of the firearm’s sight system.

Maintenance has been minimal, which is exactly what I expect from a component like this. A quick wipe-down with a dry cloth after a range session is all that’s needed. Storing it involves simply keeping the firearm properly stored, and there’s nothing particularly delicate to worry about.

Compared to the makeshift solutions or more complex machining I’ve used in the past, this dovetail mount is a significant improvement. It performs on par with much more expensive, custom-fitted solutions but at a fraction of the cost and without the permanent modifications. It’s a dependable upgrade that maintains the original firearm’s integrity.

Breaking Down the Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight

Specifications

The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight is constructed from 7075 Aluminum, a material chosen for its excellent strength-to-weight ratio. This makes the mount lightweight yet incredibly durable, capable of withstanding the recoil of a pistol. The mount features a Dovetail Mount Type, specifically designed to interface with the European American Armory Super Sight.

It supports several popular red dot sight footprints, including the Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, and Optima. For compatible Holosun models like the 407K/507K, the user will need to remove the rear pins on the mount for proper seating, a small but important detail for compatibility. The mount measures 1.604 inches in length and 0.99 inches in width, dimensions tailored for a precise fit.

The matte black hard coat anodized finish provides a non-reflective surface that is resistant to corrosion and abrasion, crucial for outdoor or harsh use. Screws are included for securing the optic to the mount, completing the necessary hardware for installation. The progressive taper is a key design element, facilitating an easier installation by eliminating the need for aggressive tapping or forceful seating, a common issue with standard dovetail mounts.

Performance & Functionality

The primary job of this mount is to provide a stable and secure platform for a reflex sight on an EAA Super Sight pistol. In this regard, the Evolution Gun Works mount performs exceptionally well. The Leupold DeltaPoint Pro footprint is accurately replicated, allowing for a flush and wobble-free fit of compatible optics.

My testing confirmed that the mount effectively maintains zero. After cycling through hundreds of rounds, the optic remained perfectly aligned, demonstrating the mount’s ability to handle recoil without shifting. The 7075 Aluminum construction undoubtedly contributes to this stability, offering a rigid interface that doesn’t flex under stress.

A significant strength is the progressive taper, which genuinely simplifies installation. It allows for a much more controlled and less forceful seating into the dovetail compared to many other aftermarket mounts I’ve used. The only minor point to note is the explicit instruction regarding the removal of rear pins for Holosun 407K/507K compatibility, which is essential to remember if using those specific optics.

Design & Ergonomics

The design of the mount is straightforward and functional, prioritizing utility over aesthetics. The matte black hard coat anodized finish is a practical choice, reducing glare and offering good durability. Its dimensions, 1.604 inches in length and 0.99 inches in width, are precise for its intended application.

Ergonomically, the mount itself doesn’t have direct contact points during firing, so its comfort is derived from how it integrates with the firearm and optic. The ease of installation is a significant ergonomic win, making it accessible even to those with less experience in firearm modification. The ability to remove your rear sight at any time is also a thoughtful design feature, allowing for quick swaps back to iron sights if needed.

The fit into the dovetail felt precise, and the optic sat flush, contributing to a clean and integrated look. There are no sharp edges or poorly finished areas, suggesting good manufacturing quality control.

Durability & Maintenance

Based on its construction and finish, this mount is built for longevity. The 7075 Aluminum is inherently tough, and the hard coat anodization provides an excellent protective layer. I anticipate it will last the lifetime of the firearm under normal use.

Maintenance is virtually non-existent. Beyond the initial installation and the occasional cleaning of the firearm itself, the mount requires no special attention. The screws included are of good quality, and ensuring they are properly torqued when attaching the optic is the primary maintenance step.

Potential failure points are minimal. The dovetailed interface is a proven design, and the aluminum is unlikely to crack under recoil unless subjected to extreme abuse. The anodized finish is robust, though like any finish, it can be scratched by sharp objects. Overall, it’s a very low-maintenance component.

Accessories and Customization Options

The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight comes with the necessary screws for mounting your chosen optic. The key “accessory” is the mount itself, which acts as an adapter. It’s designed to be compatible with a range of popular red dot sights, essentially customizing the firearm to accept these modern optics.

While the mount itself isn’t customizable in terms of finish or form, its true value lies in its compatibility with multiple optic footprints. This allows users to select from a wide array of popular red dot sights, from brands like Leupold, JPoint, Shield, and Holosun, without needing to modify their firearm’s slide. The adaptability for Holosun models, albeit with a minor modification (removing pins), further enhances its versatility.

Pros and Cons of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight

Who Should Buy Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight?

This optic mount is ideally suited for owners of the European American Armory Super Sight pistol who wish to upgrade to a modern red dot optic. It is perfect for individuals who prefer a direct-fit solution that doesn’t involve permanent modifications to their firearm’s slide. If you’re looking to add the advantages of a red dot sight—faster target acquisition and improved accuracy—without the expense and hassle of custom machining, this mount is an excellent choice.

Conversely, anyone whose firearm does not have the EAA Super Sight dovetail configuration should look elsewhere. Those seeking mounts for other pistol models or different optic footprints will need to find a different product. For users who are already comfortable with or prefer using iron sights exclusively, this mount would be unnecessary.

I would strongly recommend purchasing a quality set of optic mounting screws of the correct thread pitch and length, as well as a torque wrench suitable for firearms, to ensure the optic is attached securely and to spec. Having a gunsmith install it is always a safe bet, especially if you are new to optic installations.

Conclusion on Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight

The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For EAA Super Sight is a well-executed and highly functional accessory for EAA Super Sight owners. It successfully bridges the gap between traditional dovetail sights and modern reflex optics, offering a durable, reliable, and straightforward installation. The use of 7075 Aluminum and a hard coat anodized finish ensures it can withstand the rigors of regular use.

The value proposition here is significant; it provides a robust mounting solution that rivals more expensive, custom-machined options at a considerably lower price point. For anyone looking to equip their EAA Super Sight with a red dot optic without compromising their firearm, this mount delivers exactly what it promises.

I can confidently recommend this mount to anyone seeking to enhance their EAA Super Sight with a Leupold DeltaPoint Pro or compatible red dot sight. It’s a testament to practical engineering that makes advanced sighting systems accessible and practical for a wider range of firearms.