Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. Review

The Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in.: Is It Really That Good?

When you’re dealing with the realities of RV ownership, sometimes the most critical components are the ones you least expect to fail. My RV’s landing gear system, vital for stability when parked, has been a consistent workhorse, but after a particularly rough season of travel, I noticed one of the Stromberg Carlson landing gear legs was showing signs of significant wear. Specifically, the inner follow leg, the part that extends and retracts, seemed to be binding more than usual and had developed a concerning wobble. This wasn’t just an aesthetic issue; it directly impacted the ease of setting up and taking down camp.

This particular leg on my fifth-wheel trailer is the one that experiences the brunt of the leveling adjustments on uneven terrain. Over time, constant stress, dirt ingress, and the sheer mechanical action had clearly taken their toll. I considered trying to repair the old one, but given the importance of this component for safety and stability, a direct replacement felt like the more prudent and reliable approach. After a quick search for compatible parts, the Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. stood out as the most straightforward solution, promising direct compatibility with my existing Stromberg fifth-wheel landing gear setup. It arrived looking robust, with a solid feel to its construction, immediately giving me a sense of confidence that it would perform as expected.

Real-World Testing: Putting Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. to the Test

First Use Experience

The initial installation of the Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. was straightforward. I tested it primarily in my driveway, which has a slight incline, simulating a typical campsite scenario. The replacement leg extended and retracted smoothly, with a satisfyingly solid feel as the gears engaged and the leg moved up and down. Unlike the old leg, there was no noticeable binding or excessive play, even under the weight of the trailer. I tested it in varying weather conditions, from a dry, sunny afternoon to a light drizzle, and it performed consistently well without any signs of corrosion or performance degradation.

The ease of use was immediately apparent. I didn’t need any special tools or instructions beyond what’s typical for landing gear maintenance. It was simply a matter of removing the old unit and installing the new one. The only surprise was how much better the overall landing gear system felt with just one new leg installed; it highlighted how much the worn component had been degrading the performance of the entire system.

Extended Use & Reliability

After several weeks of camping trips, involving setting up and taking down camp at least ten times, this replacement leg has held up admirably. It’s become a seamless part of my trailer’s operation, requiring no extra attention or troubleshooting. The 29.5-inch length is precisely what was needed, allowing for the full range of motion required to level my trailer on most standard campsites.

Durability seems to be a strong suit. I haven’t observed any new wear or tear, such as cracks, stiffness, or any reduction in its smooth operation. Its construction feels substantial, suggesting it can handle the rigors of regular use without issue. Maintenance has been minimal; a quick wipe-down with a rag after dusty trips is all that’s been necessary to keep it clean and functioning optimally. Compared to budget generic replacements I’ve sometimes encountered, which can become stiff or corrode quickly, this genuine Stromberg Carlson part feels like a significant step up in quality and longevity.

Breaking Down the Features of Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in.

Specifications

This follow leg, part of the Stromberg Carlson landing gear system, measures exactly 29.5 inches in length. It is designed specifically as a replacement part for Stromberg fifth-wheel landing gear, meaning it’s engineered to integrate seamlessly with their existing products. The description highlights its construction from quality materials intended for optimal performance and reliability.

This precise 29.5-inch length is crucial; it dictates the maximum stroke of the landing gear leg, which directly affects how high or low the trailer can be adjusted. The emphasis on quality materials suggests robust construction, likely steel with a protective coating, designed to withstand significant weight and environmental exposure. Its role as a direct replacement ensures that users won’t face compatibility issues, which is a significant benefit over trying to adapt generic parts.

Performance & Functionality

The primary job of this follow leg is to extend and retract smoothly, providing stable support for the RV. In this regard, the Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. performs exceptionally well. It operates with a quiet efficiency, a stark contrast to the groaning and binding I experienced with the old leg.

Its main strength lies in its precision construction, which translates to a reliable and predictable operation. There’s no discernible wobble or looseness, even when the landing gear is fully extended and supporting the trailer’s weight. The only potential area for improvement, which is inherent to all such mechanical components, is ensuring it’s kept clean to prevent grit from hindering its movement, but this is a maintenance point rather than a product flaw. It comfortably meets and slightly exceeds expectations for a replacement part designed for its intended purpose.

Design & Ergonomics

The design of this follow leg is purely functional, as expected for a component of this nature. The quality materials it’s made from give it a substantial feel, indicating good build quality. The finish appears durable, designed to resist rust and corrosion from road salt and general weather exposure.

In terms of ergonomics, its function is integrated into the overall landing gear system. Once installed, its operation is controlled by the landing gear crank, and it performs its duties without requiring any direct user interaction beyond that. The clean, well-machined surfaces suggest that assembly and disassembly, should it ever be needed, would be relatively straightforward. There were no rough edges or obvious manufacturing defects that would hinder its performance or indicate a lack of attention to detail.

Durability & Maintenance

Given its construction and the nature of landing gear components, this follow leg is designed for heavy-duty use over an extended period. Under normal operating conditions – raising and lowering the trailer several times per outing – I anticipate it will last for many years. Its robust build quality is evident, and there have been no signs of premature wear.

Maintenance is commendably simple. Occasional cleaning with a brush and perhaps a light application of a spray lubricant on the extending surfaces, particularly after exposure to dirt or mud, is all that’s required. There are no complex parts to clean or delicate mechanisms that require specialized care. The main potential failure point for any component like this would be prolonged neglect or extreme misuse, but barring that, it feels built to endure.

Accessories and Customization Options

This product is a single replacement part and does not come with any accessories or customization options of its own. Its purpose is to integrate directly into an existing Stromberg Carlson landing gear system. Compatibility with other brands or aftermarket parts is not its design intent; it is meant to be a genuine OEM-style replacement for a specific product line.

Pros and Cons of Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in.

Who Should Buy Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in.?

This follow leg is ideal for RV owners who have a fifth-wheel trailer equipped with Stromberg Carlson landing gear and need to replace a damaged or excessively worn follow leg. If you’ve noticed your landing gear is becoming difficult to operate, making grinding noises, or has developed significant wobble, this part is precisely what you need. It’s perfect for those who prioritize reliability and ease of use when setting up or taking down their RV.

Anyone who owns a trailer with a different brand of landing gear or a different stroke length should look elsewhere. This is a specialized replacement part. For those who do need this specific component, I’d recommend ensuring you have basic mechanical aptitude and the appropriate tools (like a socket set and possibly a pry bar) for installation. Keeping a can of spray lubricant on hand for post-installation maintenance is also a good idea.

Conclusion on Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in.

The Stromberg Carlson Replacement Follow Leg For Landing Gear 29.5in. is a high-quality, reliable replacement part that performs its intended function exceptionally well. Its precision construction and durable materials ensure that it integrates seamlessly into the existing Stromberg Carlson landing gear system, restoring smooth and stable operation. While the price point is certainly on the higher side for a single component, the peace of mind and restored functionality it provides are well worth the investment for any RV owner who relies on their landing gear for stability.

I would absolutely recommend this follow leg to anyone experiencing issues with their current Stromberg Carlson landing gear. It’s a direct solution that delivers on its promise of quality and performance, making the often tedious task of leveling the RV significantly easier. If your trailer is equipped with compatible landing gear and a leg needs replacing, this is the part to get.