PullRite 2708 Isr Series Superglide High Profile Foot Kit Review

Ready to Know the Truth About the PullRite 2708 Isr Series Superglide High Profile Foot Kit?

For years, my go-to setup for towing has been the PullRite ISR Series SuperGlide hitch system. It’s a robust piece of engineering that has consistently delivered a smooth and reliable towing experience. However, as anyone who has towed even moderately sized campers or fifth wheels knows, the dance between trailer, hitch, and truck bed can get complicated quickly. My specific issue arose with a new-to-me truck that, bless its heart, has slightly taller bed rails than my previous one. This meant that when hooked up, my trailer sat just a touch nose-high, and I was getting a concerningly small margin of clearance between the trailer’s front edge and the truck’s bed rails during turns. This situation demanded a solution, and after a bit of research, the PullRite 2708 Isr Series Superglide High Profile Foot Kit emerged as the prime candidate. It promised a simple, albeit minor, adjustment to gain that crucial extra height.

Upon receiving this kit, my initial impression was one of no-nonsense functionality. The parts felt substantial, with a thick, durable-looking finish that suggested they were built to withstand the rigors of the road and the elements. It’s not a flashy product; its purpose is purely utilitarian, to solve a very specific problem. I briefly considered trying to shim my existing hitch head, but the thought of jury-rigging a safety-critical component like a hitch felt ill-advised. This dedicated foot kit from PullRite, designed specifically for my hitch series, seemed like the only proper way to address the issue. My immediate feeling was one of cautious optimism – this little change could make a big difference.

Real-World Testing: Putting PullRite 2708 Isr Series Superglide High Profile Foot Kit to the Test

My testing environment was straightforward and directly relevant: my driveway and local roads, followed by a weekend trip with my 28-foot fifth-wheel camper. The primary goal was to install the kit and immediately assess the change in hitch height and trailer levelness. The installation itself was, as expected for a component like this, rather straightforward and performed in my home garage. I didn’t encounter any specific environmental challenges beyond the usual grease and grime associated with hitch work.

The ease of use was exceptional. If you can manage to swap out a tire, you can handle installing this foot kit. It essentially involves unbolting the old feet and bolting on the new ones. I encountered no surprises or quirks during this initial phase; it was a direct replacement with no modifications needed. The only “challenge” was ensuring I had the right tools and a stable way to support the hitch head during the swap, which is standard procedure for any hitch work.

Extended Use & Reliability

After completing the installation and heading out on a 300-mile round trip, the results were immediately noticeable and positive. The trailer now sat perfectly level behind the truck, and the bedside clearance issue was resolved, providing significant peace of mind. I experienced no change in towing dynamics – no new noises, no wobbles, nothing to indicate any compromise in performance. The hitch still actuated smoothly, and the SuperGlide mechanism functioned as intended.

Durability over this initial trip was excellent. The new feet are coated in what appears to be a robust e-coated, black powder overlay, which shrugged off a few minor scuffs from my toolbox bumping against it during installation. There are no signs of wear, cracks, or any performance degradation. Maintenance is essentially non-existent; it’s a solid piece of metal that requires no special care beyond the general maintenance of the hitch system itself. Compared to the standard feet, which I’ve used for thousands of miles without issue, these high-profile units feel just as robust, if not more so, due to their slightly more substantial construction.

Breaking Down the Features of PullRite 2708 Isr Series Superglide High Profile Foot Kit

Specifications

The PullRite 2708 Isr Series Superglide High Profile Foot Kit is designed to replace the standard feet on PullRite ISR Series SuperGlide hitches, specifically models 2700, 2900, and 2300. Its primary specification is its ability to add approximately 1-1/2 inches of height to the hitch head. This subtle but significant increase in elevation is crucial for leveling trailers that have higher bed sides or for achieving better clearance, especially during tight turns. The material is heavy-duty steel, finished with an E-coated, Black Powder Overlay for corrosion resistance and a clean aesthetic that matches the hitch itself.

These specifications are critical because they directly address the core problem: misalignment between the trailer and the tow vehicle. The 1-1/2 inch height increase is not arbitrary; it’s a carefully calculated dimension designed to correct common leveling issues without introducing instability or excessive leverage. The E-coated, Black Powder Overlay finish ensures that these components, exposed to road salt, moisture, and general grit, will hold up over time and maintain their structural integrity. This focus on robust materials and a practical finish means the kit is built for the long haul.

Performance & Functionality

The main job of the PullRite 2708 Isr Series Superglide High Profile Foot Kit is to lift the hitch head, and in this regard, it performs flawlessly. The moment I hitched up after installation, the difference was palpable. The trailer was level, and the previously concerning clearance issue vanished, replaced by a comfortable margin of safety. This component doesn’t interfere with the primary function of the SuperGlide hitch; the automatic sliding mechanism still engages and disengages smoothly.

Its greatest strength is its simplicity and effectiveness. It does exactly what it claims to do without any fuss or added complexity. The only potential weakness, if one could call it that, is that it only offers a single height increment. For those needing less or more than 1-1/2 inches, it might not be the perfect solution, but for the specific problem it’s designed to solve, it’s ideal. It certainly met, and in terms of providing peace of mind, exceeded my expectations for a relatively simple upgrade.

Design & Ergonomics

The design of these replacement feet is purely functional, prioritizing strength and a precise fit. They are made from solid steel, and the E-coated, Black Powder Overlay provides a matte finish that feels durable and resists fingerprints. The fit onto the hitch head was perfect, as expected from an OEM part; there were no gaps or required forcing.

Ergonomically, the design is a non-factor in daily use because once installed, you don’t interact with them directly. Their “ergonomics” are in their robust construction and precise fit, which make installation straightforward and ensure they remain securely in place. The only interaction is the initial bolt-on, and the consistency of the bolt holes and mounting surfaces is what makes it easy to use. This attention to detail in manufacturing ensures that the part integrates seamlessly with the existing hitch.

Durability & Maintenance

Based on the materials and finish, these high-profile feet are engineered for excellent durability in typical towing conditions. The E-coated, Black Powder Overlay is a standard in automotive and heavy equipment for a reason – it provides superior resistance to rust and abrasion compared to standard paint. I anticipate these feet will last for many years and thousands of miles, likely outliving the hitch itself if properly maintained.

Maintenance is virtually non-existent. They don’t require cleaning beyond what you’d do for the rest of your hitch. You might want to give them a wipe down when cleaning your truck bed or hitch, but there are no moving parts or delicate surfaces to worry about. The only potential failure point I can foresee, common to any bolted component, would be if the bolts themselves were to loosen over extreme vibration, but this is addressed by proper installation torque.

Accessories and Customization Options

This product is a component kit, meaning it doesn’t come with accessories in the traditional sense. It is the accessory, designed to modify the existing PullRite hitch. There are no needle options, no alternative tips, or other customization points for the feet themselves. Their purpose is singular: to provide the 1-1/2 inch lift.

However, the true accessory here is the peace of mind and improved towing experience they enable. They are designed specifically for the PullRite ISR Series SuperGlide hitches, ensuring compatibility. You won’t find alternative brands or generic feet that will offer the same guaranteed fit and function for this particular hitch model.

Pros and Cons of PullRite 2708 Isr Series Superglide High Profile Foot Kit

Who Should Buy PullRite 2708 Isr Series Superglide High Profile Foot Kit?

This PullRite 2708 Isr Series Superglide High Profile Foot Kit is an absolute must-have for any owner of a compatible PullRite ISR Series SuperGlide hitch who is experiencing a nose-high trailer situation due to their truck’s higher bed rails or a specific trailer design. If you’ve ever looked at your hitched trailer and thought, “that’s sitting a bit high,” or worried about the front of your trailer kissing your truck bed on a sharp turn, this kit is for you. It’s perfect for those who prioritize safe and properly leveled towing without wanting to undertake more complex hitch modifications.

Conversely, anyone whose trailer tows perfectly level with their current hitch setup, or who needs a height adjustment significantly different from 1-1/2 inches, should look elsewhere or reconsider their setup. This kit is a targeted solution. For users who already have their trailer perfectly dialed in, there’s no need to purchase this. As for accessories, ensuring you have the correct torque wrench to properly secure the bolts is a good idea, but it’s more about proper installation technique than needing extra gear.

Conclusion on PullRite 2708 Isr Series Superglide High Profile Foot Kit

The PullRite 2708 Isr Series Superglide High Profile Foot Kit is a prime example of a product that does one thing, and does it exceptionally well. It’s not complicated, it’s not flashy, but it solves a very real and potentially costly problem for owners of PullRite ISR SuperGlide hitches. The 1-1/2 inch lift it provides is often the exact amount needed to bring a trailer into perfect level alignment, thereby enhancing safety, reducing wear, and providing that much-needed peace of mind.

At a price point of $173.99, it represents a solid value proposition when you consider the cost of potential damage from an unlevel trailer, such as trailer nose damage, truck bed damage, or even compromised towing stability. It’s a direct, reliable fix that integrates seamlessly with an already excellent hitch system. I wholeheartedly recommend this kit to anyone facing the specific issue of a slightly nose-high fifth-wheel trailer due to truck bed height with a compatible PullRite hitch. It’s a smart, effective, and durable upgrade that pays for itself in safety and convenience.