Discovering the Lee 500 S&W Crimp Die: My Take
Reloading notoriously difficult cartridges can be a rewarding, albeit sometimes frustrating, endeavor. The Lee 500 S&W Crimp Die emerged on my workbench as a solution to a specific challenge: achieving a secure and consistent crimp on the powerful .500 S&W Magnum. This specialized die, manufactured by Lee, promises a rifle-like crimp, even on cases that resist conventional methods. My initial impression upon unboxing was one of robust simplicity; the steel construction felt substantial, hinting at its intended purpose for heavy-duty work. I had briefly considered more generic roll crimp dies, but their known limitations with these large-case revolvers steered me back to this collet-style approach. My immediate reaction was a sense of targeted optimism, a feeling that this particular tool might finally tame the beast.
Real-World Testing: Putting Lee 500 S&W Crimp Die to the Test
First Use Experience
My initial testing took place on my reloading bench, a space that sees constant activity with various calibers and equipment. I focused on .500 S&W Magnum brass that had been previously problematic, often exhibiting inconsistent crimps or requiring excessive force. The Lee 500 S&W Crimp Die installed easily into my press, a standard procedure for any die. Adjusting the seating depth and crimp pressure was straightforward, though it did require a few trial rounds to dial in the perfect setting.
The die performed admirably from the first round. The collet design grabbed the case mouth with significant force, applying a firm, almost swaged-in crimp that was noticeably more robust than other methods I had attempted. There were no unexpected hiccups or issues; the process was smooth and predictable, yielding well-crimped cartridges consistently.
Extended Use & Reliability
Over several reloading sessions, totaling well over a hundred rounds of .500 S&W Magnum, the Lee 500 S&W Crimp Die has proven its mettle. It continues to deliver consistent, strong crimps without any degradation in performance. The steel collet shows no visible signs of wear, even after repeatedly gripping and crimping thick brass.
Maintenance has been minimal. A quick wipe-down with a dry cloth after use and a light application of oil on the threaded portion are all that’s needed to keep it in top condition. Compared to other crimp dies I’ve used for different calibers, this one feels particularly well-suited for its intended, high-torque application. It hasn’t faltered, even when processing slightly imperfect brass, which speaks volumes about its build and design.
Breaking Down the Features of Lee 500 S&W Crimp Die
Specifications
The Lee 500 S&W Crimp Die is designed specifically for the .500 S&W Magnum caliber. It utilizes a collet style mechanism to apply a rifle type crimp to the case mouth. This is a significant departure from typical roll crimps, employing a powerful collet that grips the entire circumference of the case.
This collet-style crimp is so effective that it can even form a crimp groove on bullets that do not possess one. This feature is particularly advantageous for cast bullets or those designed without a cannelure. It’s important to note that this die is not carbide, meaning standard lubrication practices for steel dies are recommended. The robust nature of the collet design means it’s built for serious work, ensuring a tight hold that prevents bullet setback under heavy recoil.
Performance & Functionality
The primary function of the Lee 500 S&W Crimp Die is to provide a superior crimp for the challenging .500 S&W Magnum cartridge, and it excels at this. The collet style crimp offers unmatched security, virtually eliminating the possibility of bullet jump or setback, even in the most powerful loads. This level of crimp reliability is crucial for heavy handgun cartridges, ensuring consistent headspace and reliable ignition.
Its strength lies in its ability to create a seating point, making it incredibly versatile. This means you aren’t limited to bullets with specific crimp grooves. The main drawback, inherent to its design, is that it requires precise adjustment to avoid over-crimping, which could potentially damage the case. However, once set correctly, its performance is outstanding, exceeding expectations for consistency and security.
Design & Ergonomics
The design of this die is elegantly functional. The steel construction provides a solid feel and the necessary strength for the aggressive crimp it applies. The collet mechanism is housed within the die body, accessed via a sturdy locking nut.
Ergonomically, the die is meant to be adjusted and then left. Once set on the press, it performs its task without requiring direct manipulation during the reloading stroke, beyond the normal ram movement. The die itself is standard in size for a reloading die, fitting seamlessly into any standard press. The knurled adjustment ring on the collet is functional, allowing for tactile adjustment, though fine-tuning is best done by feel and visual inspection of the crimp.
Durability & Maintenance
Given its all-steel construction and straightforward mechanism, the Lee 500 S&W Crimp Die is built for longevity. Under normal reloading conditions, it should last for countless thousands of rounds. The absence of complex parts means fewer potential points of failure.
Maintenance is minimal and straightforward. Keeping the collet and internal threads clean and lightly lubricated is key to smooth operation and preventing rust. A light application of your preferred reloading press lubricant or even a touch of gun oil on the threads will suffice. There are no specific failure points to anticipate beyond the usual wear and tear associated with any metal tool used extensively.
Accessories and Customization Options
The Lee 500 S&W Crimp Die comes as a standalone component, a testament to its focused design. It does not typically include any additional accessories or interchangeable parts. Its customization lies solely in the precise adjustment of the collet’s tension on the case mouth.
The die is designed to work with standard reloading presses that accept 7/8″-14 threaded dies. This means it integrates seamlessly into most established reloading setups without needing special adapters. There are no aftermarket components that enhance its core function; the design is already optimized for its singular purpose.
Pros and Cons of Lee 500 S&W Crimp Die
Pros
- Exceptional crimp security: The collet design provides a powerful, consistent crimp that virtually eliminates bullet setback.
- Forms its own crimp groove: This allows for secure crimping even on bullets without a cannelure.
- Robust steel construction: Built to withstand the forces required for large-caliber cartridges.
- Simple, effective design: Easy to adjust and use once set up on the press.
- Excellent value: Provides premium crimping performance at an affordable price point.
Cons
- Potential for over-crimping: Requires careful adjustment to avoid damaging cases.
- Not carbide: Requires standard die maintenance and lubrication.
Who Should Buy Lee 500 S&W Crimp Die?
This die is an absolute must-have for any serious reloader working with the .500 S&W Magnum cartridge. It is perfectly suited for those who demand the utmost security in their heavy handgun loads, especially when dealing with significant recoil. Reloaders who utilize cast bullets or jacketed bullets lacking a crimp groove will find this die particularly invaluable.
Individuals who have experienced bullet setback or inconsistent crimps with traditional methods should strongly consider this Lee product. Those seeking the absolute highest level of reliability in their .500 S&W Magnum ammunition will benefit immensely. Shooters who prioritize safety and performance, and are willing to take a few extra moments for precise adjustment, will be well-served.
Conclusion on Lee 500 S&W Crimp Die
The Lee 500 S&W Crimp Die is a triumph of focused engineering for a specific, challenging task. It delivers on its promise of a superior, rifle-like crimp that instills confidence in even the most potent .500 S&W Magnum loads. The ability to form its own crimp groove is a game-changer for bullet selection and crimp security.
Considering its $19.49 price point, the value offered by this die is exceptional. It solves a real problem for a niche but dedicated group of reloaders, and it does so effectively and reliably. For anyone loading the .500 S&W Magnum, this is not just a good purchase; it’s an essential tool for achieving optimal safety and performance in their handloads. I would wholeheartedly recommend this die to anyone looking to master the art of reloading this powerful cartridge.