Was the **Lockstep Arms Glock 9/40 Base Plate** Worth It?
For any firearm owner, the pursuit of enhanced performance is a constant. For those who rely on Glock pistols chambered in 9mm or .40 S&W, the Lockstep Arms Glock 9/40 Base Plate presents itself as a promising upgrade. This enlarged base plate, crafted from 6061-T6 Aluminum with an anodized finish, aims to boost magazine capacity and improve reload speed. My own journey to this particular accessory began with a desire to squeeze a little more utility out of my existing magazines without resorting to full-sized extended magazines that can sometimes be cumbersome. I’d seen other, more expensive options but was intrigued by the possibility of a more budget-friendly solution. Upon first inspection, the unit felt solid, with a noticeable heft that hinted at its material composition. It looked like a straightforward replacement part, a sentiment echoed by the user feedback I’d encountered online, though some noted the need for separate springs. My initial impression was one of practical curiosity – could this simple addition genuinely make a difference in my training and range time?
Real-World Testing: Putting **Lockstep Arms Glock 9/40 Base Plate** to the Test
First Use Experience
My initial testing grounds for this base plate were the familiar confines of my home workshop and then the controlled environment of my local indoor shooting range. Installation was straightforward; it slid onto the magazine base with a satisfying click, a process that felt intuitive and required no specialized tools. I loaded a standard Glock 17 magazine, now modified with the Lockstep Arms extension, and immediately noticed the added capacity – a full five rounds more, which is significant. At the range, the real test began. I ran drills focusing on magazine changes, aiming to see if the added bulk and texture genuinely facilitated a quicker grasp and insertion. The enlarged size did provide a slightly larger surface area to get my fingers on during a speed reload, and the textured sides offered a bit more purchase than the factory floor plate. However, I did encounter a minor surprise: while the base plate itself fit snugly, the user feedback I’d seen about needing separate springs proved accurate. The factory spring from an ETS magazine, while sufficient for cycling, felt a bit less robust with the increased round count.
Extended Use & Reliability
Over several weeks of consistent use, interspersed with dry-fire practice and multiple range visits, the Lockstep Arms Glock 9/40 Base Plate has held up remarkably well. It’s seen its share of being dropped (accidentally, of course) onto the range floor and has endured repeated magazine changes under simulated pressure. There are no visible cracks, the anodized finish has resisted minor scuffs, and the fit remains tight, with no rattling or looseness. Cleaning has been simple; a quick wipe-down with a cloth and some solvent is all that’s needed. Compared to some of the polymer extensions I’ve used in the past, which could sometimes become brittle or flex excessively, this aluminum unit feels far more durable. It hasn’t outperformed premium, high-dollar alternatives in terms of the sheer feel of a perfectly tuned system, but it has certainly proven its reliability for its intended purpose.
Breaking Down the Features of **Lockstep Arms Glock 9/40 Base Plate**
Specifications
The Lockstep Arms Glock 9/40 Base Plate is constructed from robust 6061-T6 Aluminum, providing a substantial feel and excellent durability. Its anodized finish offers a layer of corrosion resistance and a clean aesthetic. Designed specifically for Glock pistols, it fits models like the Glock 17, 19, 23, 26, 27, 35, 45, and 19X, accommodating both 9mm and .40 S&W calibers. This particular base plate boasts the capability to add an impressive 5 rounds to the magazine’s capacity. Weighing in at 1.8 oz, it adds a noticeable but not excessive amount of weight to the base of the magazine. The toolless install and removal is a key selling point, allowing for quick servicing without needing any special tools.
These specifications translate directly into user benefits. The aluminum construction means it’s less prone to breakage than polymer alternatives, especially in harsh conditions or during accidental drops. The added weight, while minor, can subtly aid in magazine seating during a fast reload, providing a more positive tactile feedback. The increased capacity is the primary draw for most users, offering more rounds on tap for training or potential defensive scenarios. Crucially, the toolless design simplifies maintenance, making it easy to disassemble the magazine for cleaning or to swap out springs if needed.
Performance & Functionality
The core function of this base plate is to increase magazine capacity and potentially speed up reloads, and it largely succeeds in both regards. Adding 5 rounds is a significant boost, transforming a standard capacity magazine into a higher-capacity one that’s still manageable. This extended capacity is particularly useful during extended range sessions or defensive training, reducing the frequency of reloads. The enlarged, textured sides do offer a more substantial grip surface compared to a standard Glock floor plate, which can indeed help in snatching the magazine from a pouch during a dynamic speed reload. The added weight of the plate contributes to a more positive insertion feel, a subtle but appreciated tactile cue when seating a fresh magazine under stress.
However, its performance is not without its nuances. As noted in user feedback, the factory spring in some magazines, particularly ETS magazines, might not have enough power to reliably push all 20 rounds (when adding 5 to a 15-round capacity mag) up to the feed lips. This can lead to feeding issues. Therefore, users might need to source stronger magazine springs to ensure consistent reliability with the extended capacity, which adds an ancillary cost and effort. This is a critical point for anyone relying on these for duty or defensive purposes.
Design & Ergonomics
The design of the Lockstep Arms Glock 9/40 Base Plate is focused on functionality. Machined from aluminum, it feels robust and well-made, a stark contrast to many plastic extensions. The anodized finish provides a sleek look and offers a good level of durability against scratches and corrosion. The enlarged and textured sides are a deliberate ergonomic choice, providing a larger surface area to grip when performing reloads. This texture is aggressive enough to offer positive traction, even with sweaty hands, but not so sharp as to be uncomfortable during general handling or when the magazine is stored in a pouch. The overall profile is larger than a standard base plate, which is necessary to accommodate the extra rounds, but it maintains a form factor that is still relatively sleek.
While the textured sides aid in grip during reloads, the overall ergonomics are primarily dictated by the magazine itself. The base plate’s contribution is primarily in providing a more substantial and grippable surface to pull the magazine free from. The toolless installation is a significant ergonomic win, eliminating the need for punches or tools that can be lost or inconvenient to carry. This makes it simple to attach, detach, and clean, enhancing the overall user experience.
Durability & Maintenance
Given its construction from 6061-T6 Aluminum, the durability of this base plate is a strong suit. Aluminum is inherently more resistant to impacts and stress fractures than polymer, making it an excellent choice for a component that’s frequently handled and subjected to the rigors of range use. The anodized finish adds a layer of protection against minor abrasions and environmental factors like sweat and holster wear. After multiple cycles of magazine insertion and removal, and even a few unintended drops onto concrete during testing, the unit showed no signs of cracking or significant deformation.
Maintenance is refreshingly simple. The aluminum construction makes it easy to clean with standard gun cleaning solvents and rags. Unlike some multi-part extensions that can trap debris, this unit is largely a single piece (or integrates seamlessly with the magazine body), simplifying the cleaning process. The primary maintenance consideration, as mentioned earlier, is ensuring the magazine spring has adequate power for the increased capacity. If reliability becomes an issue, swapping out the spring is a straightforward maintenance task, facilitated by the base plate’s toolless removal.
Accessories and Customization Options
The Lockstep Arms Glock 9/40 Base Plate is primarily a standalone accessory designed to enhance an existing magazine. It does not come with any additional accessories; its function is to modify the performance of your current Glock magazines. There are no further customization options inherent to the base plate itself, beyond the choice of color if multiple finishes were offered by the manufacturer (though the provided description mentions only an anodized finish, typically black or a metallic hue). Its integration is with Glock 9/40 OEM and ETS magazines, meaning compatibility is fairly well-defined. While not a customization option, the ability to add aftermarket magazine springs is crucial for optimizing its performance, and this is where users might explore the aftermarket for enhanced reliability.
Pros and Cons of **Lockstep Arms Glock 9/40 Base Plate**
Pros
- Adds 5 rounds of capacity to Glock 9mm and .40 S&W magazines, significantly increasing ammunition on hand.
- Constructed from durable 6061-T6 Aluminum for superior longevity and impact resistance compared to plastic alternatives.
- Features enlarged, textured sides that provide a better grip for faster and more confident magazine reloads.
- Toolless install and removal design simplifies magazine servicing and maintenance.
- Adds a subtle but beneficial amount of weight to the magazine base for improved seating feel.
Cons
- May require the purchase of stronger magazine springs for reliable feeding of all added rounds, especially with certain factory magazine types like ETS.
- The added length and weight, while functional, can slightly alter the overall balance and feel of the pistol when a loaded magazine is inserted.
- While durable, it is a single-point failure item for the magazine; if damaged, the entire magazine is rendered unusable until replaced.
Who Should Buy **Lockstep Arms Glock 9/40 Base Plate**?
This Lockstep Arms Glock 9/40 Base Plate is an excellent choice for range shooters, competitive shooters, and firearms enthusiasts who want to maximize the capacity of their Glock magazines without upgrading to full-length extended magazines. It’s particularly well-suited for those who engage in frequent training drills where magazine changes are a common practice, as the enhanced grip can aid in speed reloads. Furthermore, individuals looking for a cost-effective way to increase their available ammunition on their pistol will find this accessory appealing.
However, individuals prioritizing ultimate concealability or those who strictly use factory-specified magazine capacities for specific competition rules or personal preference might want to reconsider. Also, those who are unwilling to potentially invest in aftermarket springs for guaranteed reliability with the full extended capacity may wish to avoid it. A must-have accessory for this product would be compatible, higher-tension magazine springs from a reputable manufacturer to ensure consistent feeding with the increased round count.
Conclusion on **Lockstep Arms Glock 9/40 Base Plate**
The Lockstep Arms Glock 9/40 Base Plate offers a compelling blend of increased capacity and improved reload ergonomics at a very accessible price point. Its robust aluminum construction promises durability, and the textured grip surfaces are a practical enhancement for dynamic shooting scenarios. While the base plate itself is a well-executed piece of hardware, prospective buyers must be aware of the potential need to upgrade magazine springs for optimal reliability when fully loaded to its +5 round capacity. For the budget-conscious shooter looking to gain more rounds on their Glock without a significant investment, this accessory is definitely worth considering. I would recommend it, with the caveat that you budget for potentially stronger springs to ensure consistent performance.