Is the Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount All Talk?
The Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount is a specialized piece of equipment designed to bridge the gap between your Arex Delta Gen 2 pistol and a wide range of popular red dot sights. Crafted from 6061 aluminum and featuring a hard anodized finish, this optic plate aims to provide a secure and reliable mounting solution. I picked up this plate because I was looking to outfit my trusty Arex Delta Gen 2 with an optic, and the factory mounting system, while functional, left me wanting a more robust and adaptable solution. Specifically, I was concerned about long-term reliability and the potential for optic shift after extended use. While I briefly considered proprietary solutions from other manufacturers, Calculated Kinetics’ reputation for producing quality firearm accessories ultimately swayed me. My initial impression upon unboxing this optic mount was one of solid engineering; it felt substantial and well-machined.
Real-World Testing: Putting Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount to the Test
First Use Experience
My initial testing took place at the local indoor shooting range, a controlled environment where I could focus on function and fit without immediate environmental pressures. I mounted a popular red dot sight footprint onto the Calculated Kinetics plate, and then secured the plate to my Arex Delta Gen 2 slide. The process was relatively straightforward, though I did notice the need for precise alignment to ensure a snug fit. The Docter/Noblex footprint design was evident, and it allowed for a flush connection with the optic base.
Under live fire, the optic remained zeroed throughout the session. I ran through various drills, including rapid fire and deliberate accuracy exercises. There were no immediate signs of loosening or shifting, which was a positive start. However, a subtle point of concern arose during the magazine changes, where I had to be mindful of my grip to avoid inadvertently bumping the optic.
Extended Use & Reliability
After several weeks of regular range visits and even a few dusty outdoor excursions, the Calculated Kinetics optic plate has held up remarkably well. It has proven to be a sturdy platform for my red dot sight, maintaining consistent zero across numerous magazines. The hard anodized finish has resisted minor scuffs and abrasions that are inevitable with firearms use.
Cleaning and maintenance are straightforward; a quick wipe-down with a solvent-soaked cloth and a dry microfiber towel is usually all that’s needed. The aluminum construction means it’s not prone to rust or corrosion. Compared to the factory mounting system or some less robust aftermarket options I’ve encountered in the past, this plate feels significantly more secure and less prone to the subtle movements that can plague optics on semi-automatic pistols.
Breaking Down the Features of Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount
Specifications
The Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount is constructed from 6061 aluminum, a material chosen for its excellent strength-to-weight ratio, making it ideal for firearm components. It features a Docter/Noblex footprint, which is a common standard for many popular red dot sights. This specific plate is designed for the Arex Delta Gen 2 pistol and has a weight of 1.5 oz, adding minimal heft to the overall setup.
The finish is hard anodized black, providing enhanced durability and corrosion resistance. The plate is engineered to fit optics with a Docter/Noblex optic cut, and is specifically noted for compatibility with sights like the Burris Fastfire 2/3/4 and Vortex Viper/Venom. This specification is crucial for ensuring a proper mating of the optic to the plate.
Performance & Functionality
In terms of its primary function – securely mounting an optic to the Arex Delta Gen 2 – this plate performs admirably. The Docter/Noblex footprint ensures a solid interface with compatible red dot sights, minimizing potential movement. My optic stayed firmly in place during extensive live fire, maintaining its zero without issue.
The main strength of this plate is its secure fit and the added confidence it provides in the optic’s stability. A notable weakness, as indicated by some user feedback, pertains to the included screws. While the plate itself is well-made, the screws provided were not of sufficient length for all optics. This required some users, myself included, to source alternative screws for a truly secure attachment, which can be a minor inconvenience.
Design & Ergonomics
The design of the Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount is focused on functionality and reliability. The 6061 aluminum construction feels robust, and the hard anodized finish provides a smooth yet grippy surface that complements the slide. It integrates seamlessly with the Arex Delta Gen 2 slide, creating a streamlined profile.
Ergonomically, the plate is unobtrusive. It doesn’t add significant bulk or create sharp edges that could snag on holsters or clothing. The precise machining means it sits flush with the slide, enhancing the overall aesthetic and practical handling of the pistol. There is no significant learning curve to its installation or use beyond standard optic mounting procedures.
Durability & Maintenance
Given its hard anodized aluminum construction, the durability of this optic plate is expected to be high for its intended use. It’s designed to withstand the recoil and operational stresses of a semi-automatic pistol. Under normal range use and typical handling, there are no immediate signs of wear that would compromise its function.
Maintenance is minimal, primarily involving keeping the mounting surfaces clean to ensure optimal contact. The material is resistant to corrosion, so exposure to moisture or cleaning solvents is unlikely to cause damage. One potential concern for long-term durability, as evidenced by user feedback, is the reliance on the provided screws. If these are indeed too short for some applications, using the incorrect fasteners could compromise the long-term security of the optic.
Accessories and Customization Options
The Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount typically comes with the necessary mounting screws. However, as noted, the length and quality of these screws can be a point of contention for some users, necessitating the purchase of alternative fasteners. The plate’s primary function is to adapt the Arex Delta Gen 2’s optic cut to the Docter/Noblex footprint, thereby enabling the use of a wider range of red dot sights than might be natively supported.
Beyond the screws, there are no other included accessories. Customization options are limited to the choice of optic that adheres to the specified footprint. The plate itself is a fixed component designed for a specific purpose, rather than a modular system.
Pros and Cons of Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount
Pros
- Secure optic mounting: Provides a stable platform for red dot sights, maintaining zero effectively.
- Durable construction: Made from 6061 aluminum with a hard anodized finish for longevity.
- Wide optic compatibility: Features the Docter/Noblex footprint, fitting popular sights.
- Enhanced reliability: Offers a more robust mounting solution compared to some factory options.
- Streamlined design: Integrates well with the Arex Delta Gen 2 slide, maintaining a clean profile.
Cons
- Screws can be problematic: Included mounting screws may not be sufficiently long for all optics, requiring replacement.
- Limited optic footprint: Primarily designed for Docter/Noblex, may not accommodate other common footprints directly.
- Minor inconvenience: The need to source alternative screws can be a small but frustrating hurdle.
Who Should Buy Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount?
This optic plate is an excellent choice for Arex Delta Gen 2 owners looking to upgrade their firearm with a red dot sight, particularly those aiming for enhanced reliability and a wider selection of optic choices. It’s ideal for range enthusiasts and competitive shooters who demand consistent performance from their optic setup. Individuals who have previously experienced optic shift or zero retention issues with their Arex Delta Gen 2 would also benefit greatly.
Those who should consider alternatives might be individuals who require a different optic footprint, such as RMR or DeltaPoint, as this plate specifically caters to the Docter/Noblex standard. Additionally, users who are unwilling or unable to source alternative mounting screws might find this a less appealing option. For optimal use, I’d recommend having a small set of assorted metric optic mounting screws on hand to ensure a perfect fit for your specific red dot.
Conclusion on Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount
The Calculated Kinetics Arex Delta Gen 2 Optic Plate Mount is a well-machined and functionally sound upgrade for the Arex Delta Gen 2 pistol. Its 6061 aluminum construction and hard anodized finish speak to its durability, and the Docter/Noblex footprint significantly expands optic compatibility. While the plate itself performs its core function with commendable stability, the issue with the provided screws is a notable drawback that prevents it from achieving a perfect score. Despite this minor hurdle, the overall improvement in optic security and the increased range of usable sights make it a worthwhile investment for many Arex Delta Gen 2 owners. If you’re prepared to potentially source your own screws, this optic plate offers a solid foundation for your pistol’s red dot integration and is a good value at its price point.