GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous Review

The Most Honest GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous Review Online

My agencies Tactical Response team found themselves in a bit of a quandary. After transitioning from simpler breaching shotguns to more modern platforms equipped with telescoping buttplates, we realized a critical piece of equipment was missing: an effective way to manage our primary weapon, the Remington 870, in dynamic scenarios. This is where the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous entered the picture, promising a robust solution for our needs. The prospect of a secure, ambidextrous attachment point that wouldn’t interfere with our grip or operation was precisely what we were searching for.

The impetus for seeking out this specific accessory was a direct response to the operational requirements of our unit. We needed a sling attachment that could handle the stresses of tactical movement and rapid deployment, all while being accessible from either side of the shotgun. While other sling mounts exist, the reputation of GG&G for producing durable, mission-ready gear for firearms made this attachment a prime candidate for evaluation.

Upon unboxing the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous, the immediate impression was one of solid construction. Machined from what felt like a substantial block of aluminum, it exuded a sense of dependability. The matte black, Type III hard-coat anodized finish felt smooth yet grippy, and the deliberate rounding of all edges and corners was a thoughtful touch, speaking to an understanding of operator safety. There was a reassuring weight to it, not so much as to be cumbersome, but enough to signal its robust nature.

In the market, while simpler loops or basic strap attachments are available, the GG&G unit stood out due to its ambidextrous design and its specific accommodation for HK-style snap hooks, which are a standard on many modern tactical slings. The ability to use it for both single-point and dual-point sling configurations was also a significant draw, offering flexibility that cheaper alternatives often lack. My initial impression was one of cautious optimism; it looked the part, but the real test would be how it performed under pressure.

First Use Experience

Our initial deployment of the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous occurred during a multi-day training exercise focused on close-quarters engagement and room clearing. This environment demanded constant movement, transitions between cover, and the need to quickly bring the shotgun to bear or get it out of the way. The attachment point was installed on a standard Remington 870 Express Tactical, paired with a Magpul SGA stock.

The attachment performed admirably under these rigorous conditions. The HK-style snap hook on our single-point sling attached securely and without issue, and its placement, as intended, did not impede our firing hand or trigger finger. Even during rapid transitions and shoulder changes, the sling remained free from binding or snagging on the attachment point, a common frustration with poorly designed mounts.

It was immediately intuitive to use. There was no complex learning curve; the sling either attached or it didn’t, and the large loops on this GG&G model ensured a positive connection every time. One surprising quirk, though, was the slight addition to the length of pull. As noted in the product description and some user feedback, the mount sits between the stock and the receiver, subtly extending how far the stock comes back. For some of our team members, this was barely noticeable, but for others, it was a minor adjustment to their preferred shooting stance.

Extended Use & Reliability

After several months of regular use within our training cadre, the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous has proven its worth. It has been subjected to countless repetitions of shouldering, transitioning, and slinging the weapon, often in less-than-ideal conditions involving dust, the occasional drop on soft ground, and varying temperatures. The solid billet aluminum construction and mil-spec anodizing have held up remarkably well against physical stress.

However, as some user feedback accurately pointed out, the paint on it scratches off easily. While this is purely cosmetic and doesn’t affect function, it’s a noticeable wear point. After just a few weeks of intense use, the edges around the loop began to show silver aluminum peeking through the black finish. This is a common trade-off with many weapon accessories, but it’s worth noting for those who prioritize pristine aesthetics.

Maintenance is blessedly simple. Because it’s a static part of the shotgun, it requires no active cleaning beyond a wipe-down when the firearm itself is cleaned. The attachment points remain free of debris, and the loops show no signs of warping or weakening. Compared to some cheaper stamped metal sling mounts that can bend or deform over time, this GG&G unit feels like it will outlast the shotgun it’s attached to, paint scratches notwithstanding.

Specifications

The GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous is precisely engineered for its intended purpose. It is machined from solid billet 6061 T6 aluminum, a material chosen for its excellent strength-to-weight ratio and corrosion resistance. This robust construction ensures that the mount can withstand significant stress without failing.

The finish is a Type III hard-coat anodized matte black, a standard in the firearms industry for durability and non-reflectivity. This anodizing process not only protects the aluminum from wear but also provides a desirable, non-glare surface. This spec is crucial for tactical applications where minimizing visibility is paramount.

The design features large loops specifically engineered to accommodate HK-style snap hooks and other similarly sized sling clips. This means it’s not just for one specific type of sling hook; it offers versatility. Additionally, the entire unit is fully ambidextrous, meaning it can be installed and used effectively whether you are right or left-handed.

Performance & Functionality

In its primary role, the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous performs exceptionally well. Its main job is to provide a secure, accessible point for attaching a single-point sling to a Remington 870 platform. It achieves this with remarkable efficacy, offering a stable and reliable connection that doesn’t shift or loosen during dynamic movement.

The large loops are a significant strength, making it incredibly easy to attach and detach a sling, even under stress or when wearing gloves. This feature alone is a major advantage over smaller, more fiddly attachment points. The ambidextrous nature also means that any operator, regardless of dominant hand, can utilize the sling system without compromise.

However, there’s a functional consideration regarding the mount points being high. As noted by some users, this can cause the sling to rub against the shooter’s face when the shotgun is shouldered, especially if the sling is adjusted tautly. This is a trade-off inherent in rear-mounted sling attachments on shotguns, which often sit higher than comparable mounts on AR-style rifles. The loops are also described as being a bit too thick to easily get an HK style hook onto them by one user, though my own experience found them to be slightly snug but manageable with a firm push.

Design & Ergonomics

The design of this sling attachment is clearly operator-focused, with a strong emphasis on both utility and safety. The use of 6061 T6 aluminum contributes to a perceived sturdiness that inspires confidence in its durability. The Type III hard-coat anodized finish feels premium and provides a good grip, resisting accidental slips.

Ergonomically, the attachment is designed to be unobtrusive. It sits flush against the receiver/stock interface and is shaped to avoid snagging or interfering with the grip of the firing hand. This is crucial for maintaining control and confidence in the weapon system.

A key design element is the meticulous rounding and dehorning of all corners and edges. This detail, often overlooked by manufacturers, is a testament to GG&G’s commitment to user safety. It prevents uncomfortable digging into the hand or face, a common annoyance with sharp-edged accessories.

Durability & Maintenance

In terms of durability, the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous is built to last. The solid aluminum construction means that failure due to bending or cracking under normal use is highly unlikely. The hard-coat anodized finish, while prone to cosmetic scratches, offers excellent protection against corrosion.

Maintenance is virtually nonexistent, beyond ensuring it’s clean when the shotgun is cleaned. The NSN: 1005-01-588-7697 designation suggests its adoption in military or governmental contexts, underscoring its intended robustness. Given the construction, it’s reasonable to expect this attachment to remain functional for the life of the shotgun.

The primary durability concern, as mentioned, is the paint’s susceptibility to scratching. This is a cosmetic issue that does not impact the structural integrity or function of the mount. For those who require an unblemished finish, careful handling or a custom coating might be considered, but for operational use, its resilience is unquestionable.

Accessories and Customization Options

The GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous is designed to work as a singular component, and as such, it does not come with any additional accessories. Its primary function is to interface with a pre-existing sling system, particularly those utilizing HK-style snap hooks.

Compatibility with aftermarket buttstocks is a noted feature. The product description specifically mentions its fitment with popular options like the Knoxx stock from Blackhawk. This suggests a thoughtful design process that accounts for common shotgun configurations.

While there are no direct customization options for the attachment itself, its versatility in supporting both single-point and dual-point sling setups offers a form of user customization regarding how the overall sling system is employed. The unit itself is a fixed piece, so customization would involve selecting the appropriate sling to pair with it.

Pros and Cons of GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous

Who Should Buy GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous?

This sling attachment is ideal for Remington 870, 1100, and 1187 shotgun owners who utilize, or wish to utilize, a single-point sling setup. It’s particularly well-suited for tactical operators, law enforcement professionals, or serious sport shooters who demand a robust and reliable connection point. Anyone transitioning to a telescoping or modern stock configuration on their shotgun will find this accessory invaluable for adapting their sling system.

Those who prioritize a pristine, scratch-free finish above all else might want to reconsider or plan for custom Cerakoting. Individuals who are extremely sensitive to minor changes in length of pull might also find the slight extension to be a consideration. However, for most users prioritizing functionality and durability, these are minor points.

Essential complementary items would be a quality single-point sling with an HK-style snap hook or a similar robust clip. For installation, a Phillips and flathead screwdriver are typically all that’s needed for an 870, though some users report needing additional tools for specific aftermarket stock installations on other models like the 1100.

Conclusion on GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous

The GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous is a commendably engineered accessory that effectively bridges the gap for users needing a secure and versatile sling attachment on their Remington shotgun platform. Its solid aluminum construction, coupled with thoughtful design elements like rounded edges and an ambidextrous orientation, make it a durable and operator-friendly choice. While the cosmetic finish can show wear relatively quickly, this is a minor drawback that doesn’t detract from its primary function or structural integrity.

Considering its price point of $31.99, the value proposition is strong. You’re receiving a highly functional, robust component from a reputable manufacturer, designed for demanding use. It significantly enhances the usability of a shotgun for dynamic operations or simply for more comfortable carrying and manipulation.

Overall, I would highly recommend the GG&G Remington 870 Single Point Sling Attachment Looped, Ambidextrous to any Remington shotgun owner looking to implement a reliable single-point sling system. It’s a well-made piece of gear that delivers on its promises of strength, ambidextrous capability, and operational efficiency, making it a worthwhile investment for anyone serious about their firearm’s ergonomics and functionality.