DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube Review

Is the Hype Real? DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube Reviewed

The DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube mount promises a rock-solid, lightweight, and aesthetically pleasing solution for mounting a 1-inch scope to a Savage long action rifle. DNZ Products built a reputation for crafting one-piece mounts that eliminate potential weak points found in traditional multi-piece systems. My experience with budget scope mounts has been less than stellar, so I was eager to see if the hype surrounding this one-piece design was warranted.

My primary concern was achieving a stable and repeatable zero on my Savage 110 in .30-06. I was using a two-piece Weaver base and rings previously, and I consistently battled shifting point of impact after each range session. The frustration of chasing zero ultimately led me to seek a more robust mounting solution.

Upon unboxing the DNZ mount, I immediately noted the clean machining and matte finish. The mount felt surprisingly lightweight, yet the 6061-T6 aluminum construction instilled confidence in its strength. The one-piece design immediately eliminated any concerns about base screws loosening or ring alignment issues.

I considered the Leupold Backcountry Cross-Slot and Talley Lightweight Alloy scope mounts. However, the DNZ mount’s integrated design and reputation for simplicity swayed my decision. My first impression was overwhelmingly positive. This mount seemed like a significant step up in quality and design compared to my previous setup, and I was excited to get it installed and tested.

Real-World Testing: Putting DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube to the Test

First Use Experience

I first tested the DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube at my local shooting range. The weather was mild and sunny, ideal for zeroing a new scope mount. Installation was surprisingly straightforward; the mount dropped right onto the receiver, and the included screws secured it firmly.

Zeroing my Nikon 3-9×40 scope was a breeze, requiring minimal adjustments after initial bore-sighting. Recoil from the .30-06 was effectively absorbed, and the scope remained steadfastly in place. I experienced no shifting or wandering of my zero after multiple rounds downrange.

Extended Use & Reliability

After several months of use, including a deer hunting trip in moderately rugged terrain, the DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube has proven remarkably durable. There are no visible signs of wear and tear, and the finish has held up well against the elements. I also tested it during a rainy range day, and observed no changes to the point of impact.

Maintenance involves simply wiping down the mount with a clean cloth after each use. I haven’t needed to re-tighten any screws or perform any major upkeep. Compared to my previous two-piece mount, the DNZ mount has been a revelation. It has provided unwavering stability and eliminated the frustrating chore of constantly re-zeroing my rifle.

Breaking Down the Features of DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube

Specifications

• * Manufacturer:* DNZ Products.
• * Material:* 6061-T6 Aluminum. This provides a lightweight yet strong base.
• * Gun Make:* Savage, specifically long action receivers. Ensure correct action length for proper fit.
• * Tube Diameter:* 1 inch. Compatibility with 1-inch scope tubes is essential.
• * Included Accessories:* Integrated ring and base combo. Eliminates the need for separate rings and bases.
• * Additional Features:* One-piece base and ring combo. Increases rigidity and reduces potential failure points.
• * Quantity:* 1. Each package contains a single scope mount.
• * Condition:* New. Guarantees a pristine product free from prior use.
• * Available Heights:* Low, Medium, and High. The height required depends on your objective lens diameter and action.
• * Available Colors:* Black and Silver. Allows you to match or complement the finish of your rifle and scope.

These specifications are critical because they directly influence the mount’s strength, weight, and compatibility with your rifle and scope. The one-piece design ensures maximum rigidity, which is essential for maintaining a consistent zero. The correct height ensures proper eye relief and prevents the objective lens from contacting the barrel.

Performance & Functionality

The DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube mount excels at its primary job: securely holding a scope on a Savage long action rifle. Accuracy is significantly improved compared to traditional two-piece mounts due to the increased stability. The mount’s rock-solid construction ensures that the scope remains firmly in place, even under heavy recoil.

One minor weakness is the limited adjustability. Since it’s a one-piece design, you cannot adjust ring spacing or cant. However, this is a trade-off for the increased rigidity and simplicity. Overall, it significantly exceeded my expectations, providing a level of stability and consistency that I had not previously experienced with budget scope mounts.

Design & Ergonomics

The DNZ mount is constructed from high-quality 6061-T6 aluminum, which provides a balance of strength and lightweight. The matte finish is aesthetically pleasing and helps to reduce glare. The mount feels solid and well-made, inspiring confidence in its ability to withstand the rigors of field use.

The one-piece design makes it incredibly user-friendly. Installation is quick and easy, requiring only basic tools. There is virtually no learning curve; even novice scope installers should be able to mount their scope with ease.

Durability & Maintenance

The DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube mount is built to last. The 6061-T6 aluminum is highly resistant to corrosion and wear. With proper care, the mount should provide years of reliable service.

Maintenance is minimal, requiring only occasional cleaning with a soft cloth. The durable finish is resistant to scratches and abrasions. I expect this mount to outlast many of my rifles.

Accessories and Customization Options

The DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube mount is designed primarily as a standalone unit. It does not require any additional accessories for basic installation. The height options (low, medium, high) allow some flexibility in selecting the appropriate mount for different scope objective lens diameters.

While the mount itself does not offer extensive customization options, it is compatible with any 1-inch scope. The simple design ensures broad compatibility with various scope brands and models. You cannot change out individual rings or adjust the base separately, as with multi-piece systems.

Pros and Cons of DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube

Who Should Buy DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube?

The DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube is perfect for hunters and recreational shooters seeking a reliable and stable scope mounting solution for their Savage long action rifles. It is also a great choice for those who value simplicity and ease of installation. Anyone frustrated with constantly re-zeroing their rifle due to unstable scope mounts will greatly benefit from the DNZ mount’s one-piece design.

This product might not be ideal for competitive shooters who require highly adjustable scope mounts with specific canting or spacing options. Those who frequently swap scopes between rifles may also find the one-piece design less convenient than modular systems. A user who has an unconventional scope or mounting need may not be best served.

Must-have accessories include a quality torque wrench to ensure proper screw tightening and a scope leveling kit to ensure the reticle is perfectly aligned. While not strictly necessary, these tools will help to maximize the performance and accuracy of your rifle.

Conclusion on DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube

Overall, the DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube mount is an excellent choice for anyone seeking a rock-solid, lightweight, and easy-to-install scope mounting solution for their Savage long action rifle. The one-piece design eliminates potential weak points and ensures maximum rigidity, resulting in improved accuracy and consistent zeroing. While the limited adjustability may not appeal to all users, the benefits of simplicity and stability far outweigh the drawbacks for most applications.

At a price of $58.95, the DNZ mount represents an excellent value proposition. The improved accuracy and peace of mind that come with a stable scope mount are well worth the investment. I would wholeheartedly recommend this product to any Savage long action rifle owner looking to upgrade their scope mounting system.

If you are tired of chasing zero and want a reliable and hassle-free scope mounting solution, then the DNZ Savage All Round Receiver Long Action 1 Inch Scope Tube is the perfect choice for you. Upgrade your rifle today and experience the difference that a quality scope mount can make!