Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes Review

Ready to Know the Truth About the Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes?

The world of firearms accessories can be a crowded one, filled with components that promise the moon but deliver little. My own journey has taken me through countless iterations of gear, always searching for that sweet spot where performance meets reliability. When I found myself needing a reliable choke tube for my 20-gauge Beretta, the Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes caught my eye. These weren’t just any choke tubes; they were specifically designed for waterfowl, a hunting discipline where every shot counts.

My previous choke tube, a generic model, had started showing signs of wear, and more importantly, I felt I was losing consistency in my patterns, especially under less-than-ideal conditions. I considered a few other brands, but Carlson’s reputation for quality and their specific Delta Waterfowl line piqued my interest. My initial impression upon receiving this choke tube was one of solid craftsmanship. The 17-4 stainless steel construction felt substantial, and the knurled exterior hinted at practical design choices. There was a definite sense of professional-grade utility about it, a welcome change from some of the more cosmetic options available.

First Use Experience

My first real test of the Carlson’s choke tube came on a blustery late autumn morning, the kind where the wind whips off the water and fog clings to the reeds. I had fitted the new choke tube into my Beretta 686 Silver Pigeon with minimal fuss; the knurled exterior provided excellent grip for a hand-tight installation. My initial patterning session on a private range, using various loads from Federal and Remington, immediately impressed me. The patterns were tighter and more consistent than I had experienced previously, even with slightly less-than-ideal shooting stances forced by the wind.

The extended design, with its longer parallel section, seemed to live up to its claims of improved shot-string performance. I didn’t experience any noticeable issues with cycling or extraction after several shots. It felt like a natural extension of the barrel, performing exactly as it should without drawing unnecessary attention to itself, which is precisely what you want from reliable gear.

Extended Use & Reliability

Over the course of the waterfowl season, this choke tube became a permanent fixture in my 20-gauge. It weathered rain, sleet, and the occasional dunking in marshy water without complaint. The 17-4 stainless steel proved its worth, resisting any signs of rust or corrosion despite the constant exposure to the elements. Cleaning was straightforward; a quick brush and some solvent removed any residue, and the knurling made it easy to remove for deeper cleaning after a long day in the field.

Compared to some of the more basic choke tubes I’ve used in the past, this Carlson’s model offered a tangible improvement in consistency. I noticed fewer “blown” patterns and a more predictable spread of shot, which translated directly into more confident shots. It held its own against both budget-friendly alternatives and more expensive, specialized chokes I’ve tried on other firearms.

Specifications

The Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes are built to exacting standards, reflecting their intended purpose. The primary material is aircraft quality 17-4 stainless steel, a choice that immediately signifies durability and corrosion resistance. This particular model is designed for the Beretta/Benelli Mobil choke tube system, ensuring a precise fit with compatible shotguns.

The gauge is specifically 20-gauge, making it suitable for a wide range of 20-gauge firearms employing the Mobil system. It is a non-ported model, which is a deliberate design choice for waterfowl hunting to minimize sound and maintain velocity. The knurled exterior is a key functional feature, allowing for quick and easy hand-tightening and removal without specialized tools. The extended design offers an advantage in manipulating the choke, especially with cold or gloved hands.

The extended length also contributes to better gas regulation and a longer parallel section, which Carlson’s claims aids in shot-string efficiency. This means the shot pellets maintain their arrangement for a longer portion of their flight, leading to denser patterns at range. This specification is crucial for effective wing shooting where precise shot placement is paramount.

Performance & Functionality

The core function of any choke tube is to constrict the shotgun barrel’s muzzle to control the spread of shot. The Carlson’s choke tube excels at this primary task. For waterfowl hunting, where shots can range from close to medium distances, this choke delivers consistent, predictable patterns. I found it particularly effective with #3 and #4 buckshot, common waterfowl loads, producing dense clusters that increased my hit probability.

The non-ported design is a significant advantage in the field, preventing the loss of muzzle velocity and reducing muzzle jump that can occur with ported chokes. This translates into a more stable follow-up shot, which is invaluable when birds are flying in flocks. While it doesn’t offer the extreme constriction of some specialized turkey chokes, its design is perfectly optimized for the typical ranges and shot sizes used in waterfowl hunting. It met and, in some aspects, exceeded my expectations for this type of application.

Design & Ergonomics

The design of the Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes is a blend of robust engineering and practical user-friendliness. The 17-4 stainless steel provides a reassuring heft and a durable finish that can withstand the rigors of outdoor use. The knurled exterior is not just for show; it provides a secure grip, making installation and removal simple, even with numb fingers on a frigid morning.

The extended nature of the choke also makes it easier to grasp and turn compared to flush-mounted tubes. This is a small but significant ergonomic advantage when you’re in the field and time is of the essence. The finish on the steel is consistent, and the threading is clean, ensuring a smooth fit into the shotgun barrel without any binding or cross-threading issues.

Durability & Maintenance

Based on my extended use, the durability of this choke tube is excellent. The 17-4 stainless steel is a proven material for firearms components, offering superior strength and corrosion resistance. I have experienced no signs of deformation, cracking, or performance degradation over a full hunting season and subsequent practice sessions.

Maintenance is refreshingly simple. A basic cleaning kit, including a bore brush and solvent, is all that’s needed to keep it in top condition. The knurled exterior makes it easy to unscrew for cleaning, and the material itself wipes down easily. There are no complex parts or delicate mechanisms to worry about.

Accessories and Customization Options

This specific product is a standalone choke tube, and as such, it doesn’t typically come with accessories. However, Carlson’s offers a wide range of choke tubes for various gauges and firearm systems, allowing for significant customization of a shooter’s shotgun performance. For the Beretta/Benelli Mobil system, Carlson’s offers different constriction levels (like Improved Cylinder, Modified, Full) and specialized versions, such as turkey or waterfowl chokes.

The main “customization” aspect is choosing the correct choke constriction for your intended shooting discipline. For waterfowl, the Delta Waterfowl model offers a good balance. Its compatibility with the Beretta/Benelli Mobil system means it integrates seamlessly with numerous popular shotgun models.

Pros and Cons of Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes

Who Should Buy Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes?

This choke tube is an ideal choice for waterfowl hunters who own a 20-gauge shotgun compatible with the Beretta/Benelli Mobil choke tube system. If you are looking to improve your pattern density and consistency in the field, especially during challenging weather conditions, this model is a strong contender. It’s perfect for those who appreciate well-made, durable accessories that perform without fuss.

However, if your shotgun does not use the Beretta/Benelli Mobil system, or if you are looking for a choke for a different shooting discipline (like sporting clays with extreme constrictions or turkey hunting with specialized patterns), this specific model might not be the right fit. For those seeking versatility across multiple shotgun platforms, investing in a different choke system or a multi-tool might be more practical.

Conclusion on Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes

The Carlson’s Choke Tubes Beretta/Benelli Mobil 20 Gauge Delta Waterfow Ext Steel Choke Tubes represent a smart investment for any serious waterfowl hunter with a compatible firearm. They successfully blend robust construction, thoughtful design, and tangible performance improvements. The 17-4 stainless steel build ensures longevity, while the knurled, extended design enhances usability in the field. For its price, the performance and durability offered are exceptional, making it a compelling value proposition. I would confidently recommend this choke tube to fellow waterfowl enthusiasts seeking to refine their shotgun’s performance. It’s a piece of gear that quietly does its job exceptionally well, allowing you to focus on the hunt.