Tasco 2 Pc Base Savage 110 Review

Full Disclosure: Tasco 2 Pc Base Savage 110

When the familiar click of a scope mount going off-target became a recurring annoyance, it was time for a change. My Savage 110, a rifle that has seen more than its fair share of field use, deserved a foundation as solid as its action. The previous setup, a single-piece base, had developed a subtle wobble after countless excursions and rough handling, impacting my rifle’s zero. This led me to seek a more robust and dependable solution. The Tasco 2 Pc Base Savage 110 immediately caught my eye with its promise of a two-piece design and a price point that didn’t break the bank. Upon arrival, the initial impression was positive; the aircraft quality aluminum felt sturdy, and the matte black anodizing offered a non-reflective finish. Compared to the flimsy steel bases I’d seen and the exorbitant price of some premium brands, this felt like a pragmatic choice. My first reaction was one of quiet optimism – a feeling that this simple component might finally put an end to my mounting frustrations.

Real-World Testing: Putting Tasco 2 Pc Base Savage 110 to the Test

First Use Experience

The installation process was straightforward, conducted on my workbench amidst the scent of gun oil and the quiet hum of my workshop. I mounted the bases onto my Savage 110, ensuring a snug fit before attaching my preferred scope. The initial testing involved several rounds at the local indoor range to confirm zero. The bases performed admirably, holding steady even with moderate recoil from various .308 loads. In terms of ease of use, the Tasco bases were intuitive; no complex instructions or specialized tools were needed beyond standard gunsmithing essentials. A minor surprise was the tactile feel of the aluminum; it’s not as slick as some polished steel, which I found actually aids in grip during installation.

Extended Use & Reliability

Over several months, these bases have endured a mix of conditions. They’ve been exposed to the damp chill of early morning deer stands, the dry heat of desert scrub, and the occasional bump against a tree limb while navigating dense brush. Despite this varied use, there have been no signs of looseness or degradation in performance. The matte black anodizing has resisted superficial scuffs remarkably well, maintaining its original appearance. Cleaning has been as simple as a quick wipe-down with a soft cloth and mild solvent, with no special maintenance required beyond ensuring the mounting screws remain properly torqued. When compared to older, single-piece steel bases I’ve used in the past, which tended to flex slightly under stress, these two-piece Tasco bases have proven to be a significant upgrade in stability and reliability.

Breaking Down the Features of Tasco 2 Pc Base Savage 110

Specifications

The Tasco 2 Pc Base Savage 110 are constructed from 100 percent aircraft grade aluminum alloy, ensuring a lightweight yet durable foundation for optics. Each base is black anodized with a matte finish, which is crucial for minimizing glare in bright shooting conditions. The design employs a two-piece configuration, which often allows for greater flexibility in scope placement and can reduce stress on the receiver compared to single-piece bases. These mounts are manufactured to Weaver fit specifications, meaning they are designed to accept most standard Weaver-style rings and accessories. The detachable nature, with the ability to loosen them using a coin, is an interesting feature, though I prefer leaving them permanently mounted for maximum stability.

These specifications translate directly into practical benefits for the end-user. The aircraft grade aluminum keeps overall rifle weight down, a consideration for hunters and anyone carrying their rifle for extended periods. The matte black anodizing is not just for aesthetics; it directly contributes to a more effective hunting or tactical encounter by preventing tell-tale glints of sunlight. The two-piece design is particularly beneficial for bolt-action rifles like the Savage 110, as it allows each base to sit flush on the receiver’s inherent contours, ensuring a more consistent and stable platform for the scope. Adherence to Weaver fit specifications is a significant advantage, providing broad compatibility with a vast array of scope rings and other aftermarket accessories.

Performance & Functionality

The primary job of these bases is to provide a stable, repeatable platform for mounting a rifle scope. In this regard, the Tasco 2 Pc Base Savage 110 perform exceptionally well. Once properly torqued, they offer a rock-solid foundation that actively resists movement under recoil. My zero has remained consistent through repeated firing sessions and significant jostling in transit, which is the ultimate test of any base system. The fact that they are designed to Weaver specifications means they mate perfectly with compatible rings, ensuring a secure grip on the scope tube itself.

The main strength of this Tasco offering is its straightforward, no-frills functionality coupled with reliable performance at a budget-friendly price. They do exactly what they are designed to do without any unnecessary complexity. The only minor weakness, if one can call it that, is the “detachable with a coin” feature. While convenient for quick changes, I found that for long-term, rigorous use, a good wrench and proper torque are far more reassuring. For many users, however, this coin-detachability might be a welcome convenience.

Design & Ergonomics

The design of the Tasco 2 Pc Base Savage 110 is purely functional, prioritizing stability and compatibility over elaborate aesthetics. The lightweight aircraft quality aluminum construction is evident, giving the bases a substantial feel without adding undue weight. The matte black anodizing provides a durable, non-glare finish that blends well with most rifle stocks and scopes. There are no sharp edges or protruding parts; everything is smoothly finished, which is important to prevent snagging on gear or clothing in the field.

Ergonomically, these bases are not something you interact with directly, beyond installation. Their design is focused on providing a perfect interface with scope rings and the rifle’s receiver. The pre-drilled holes for mounting screws are clean and precisely machined, allowing for a flush fit. The Weaver fit specification means the slots for the recoil control keys on Weaver-style rings are perfectly cut, ensuring they seat properly and prevent any lateral movement. This attention to detail in the mounting interface is what makes them feel so secure and reliable in practice.

Durability & Maintenance

Given their construction from aircraft grade aluminum and the robust black anodizing, these bases are built to withstand a significant amount of use and abuse. I anticipate they will last for many years, likely outliving the rifle itself under normal operating conditions. The aluminum alloy is inherently resistant to corrosion, and the anodized finish provides an additional layer of protection against wear and environmental factors.

Maintenance is minimal. Beyond an initial proper installation with correct torque values, there isn’t much to do. A periodic check of the mounting screws is always prudent, especially after rough use, but I haven’t found them to loosen up unexpectedly. Cleaning is simple – a quick wipe to remove dust, mud, or residue is sufficient. There are no complex parts to disassemble or lubricate, making them a very low-maintenance component. The only potential failure point, common to all mounted bases, would be overtightening the mounting screws, which could strip the threads in the receiver, but that’s an installation error rather than a product flaw.

Accessories and Customization Options

The Tasco 2 Pc Base Savage 110 primarily function as the foundation for optics, so their “accessories” are the scope rings that attach to them. Being manufactured to Weaver fit specifications, they are compatible with a vast array of Weaver-style scope rings from numerous manufacturers. This broad compatibility is a significant advantage, allowing users to choose rings that perfectly suit their scope diameter, tube height preferences, and desired eye relief.

While the bases themselves don’t offer much in terms of direct customization, their design is intended to be a blank slate for attaching various optics. The two-piece configuration allows for more flexibility in positioning the scope than a single-piece base, enabling users to achieve optimal eye relief and mounting height. The inclusion of a rock solid & detachable design, while not my preferred method for serious use, does offer a unique customization in terms of quick removal if needed, perhaps for cleaning or switching to iron sights.

Pros and Cons of Tasco 2 Pc Base Savage 110

Who Should Buy Tasco 2 Pc Base Savage 110?

This Tasco 2 Pc Base Savage 110 is an excellent choice for the budget-conscious rifle owner who needs a dependable mounting solution for their Savage 110 rifle. It’s ideal for hunters, recreational shooters, and anyone who wants to mount a scope securely without breaking the bank. Individuals who value stability and a non-glare finish will find these bases very satisfactory.

Conversely, users who require the absolute lightest materials, or who are building a precision rifle where every gram and every fraction of a MOA counts, might consider premium-grade, purpose-built bases from higher-end manufacturers. Those who plan on frequent scope swaps might appreciate the coin-detach feature, but for long-term mounting, it’s a secondary benefit. A must-have accessory to complement these bases would be a quality set of Weaver-style scope rings that match your scope’s objective lens diameter and receiver height needs, along with a reliable torque wrench to ensure proper installation.

Conclusion on Tasco 2 Pc Base Savage 110

The Tasco 2 Pc Base Savage 110 are a testament to functional design and solid manufacturing without an exorbitant price tag. They deliver on their promise of providing a rock solid and stable platform for mounting optics on a Savage 110 rifle. The aircraft quality aluminum and matte black anodizing contribute to a durable and practical product that performs admirably in various real-world conditions. For the price of $33.89, the value proposition is exceptionally strong, offering performance that often rivals more expensive options. I would confidently recommend these bases to any Savage 110 owner looking for a reliable, no-nonsense mounting solution. They are a smart buy for anyone prioritizing dependability and value for their rifle optic setup.