Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail Review

The One Thing I Didn’t Expect from the Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail

My workbench is a well-worn testament to a decade of pushing equipment to its limits, and my SIG Sauer P320 platform is no exception. When the need arose to mount a micro red dot sight, specifically the UTG RDM20, onto my P320, I looked for a streamlined, reliable solution. The Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail seemed like the obvious, no-nonsense choice, especially given its advertised compatibility with SIG P-Series double-stack pistols. The promise of aircraft-grade aluminum construction and a matte black finish suggested durability and a clean aesthetic that would complement my firearm.

The impetus for this particular purchase was a desire to improve my close-quarters target acquisition speed without the bulk of traditional iron sights or larger optic footprints. I’d previously experimented with other mounting solutions that often required milling the slide or involved more complex adapters. This UTG mount, designed to replace the rear sight, promised a simpler, more direct approach, and at a price point that felt almost too good to be true. My initial impression upon unboxing was positive; the mount felt solid and well-machined, its matte finish appearing robust. It certainly looked the part of a no-frills, functional piece of equipment, and I was keen to see if it would perform as expected.


Real-World Testing: Putting Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail to the Test

My testing environment was primarily my home workshop and a local indoor shooting range. I needed to assess how easily the mount integrated with a SIG P320 M18, and crucially, how it held up under the stresses of live fire. The idea was to mimic a scenario where someone might install this at home and then immediately head to the range for a practical evaluation.

First Use Experience

The installation process was where the first significant hiccup occurred. The mount is advertised as fitting SIG P-Series double-stack pistols by replacing the rear sight. However, upon attempting to fit it into the dovetail of my SIG P320 M18, it became immediately apparent that there was a critical dimensional mismatch. The length of the mount was insufficient to adequately cover the chamber indicator slot, a vital component of the P320’s design that prevents the striker from engaging if the magazine is removed.

This oversight meant that the chamber indicator could, and indeed did, fall out when the mount was in place, rendering the firearm potentially unsafe and non-functional in a critical aspect. Furthermore, the mounting holes on the adapter did not align with the threaded holes on the P320’s slide that are designed to accept an optic. This complete lack of proper fitment meant that the Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail was, in my experience, completely incompatible with my specific P320 model, despite its stated compatibility. It was a surprise, and frankly, a disappointment, to encounter such a fundamental fitment issue right out of the gate.

Extended Use & Reliability

Due to the fundamental incompatibility discovered during the initial installation, extended use and reliability testing of this mount on my SIG P320 was impossible. The inability to properly secure the mount, the critical safety feature of the chamber indicator being compromised, and the misaligned screw holes meant the unit could not be safely or functionally used. Consequently, I cannot speak to its durability over time, its performance under repeated use, or its maintenance requirements in a real-world application on the intended firearm platform. The review, therefore, is limited to the critical initial fitment and functionality assessment, which proved to be a deal-breaker.

Breaking Down the Features of Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail

Let’s dissect the advertised specifications and see how they stack up against the reality of this mount. The description promises a lot for a very accessible price point.

Specifications

  • Material: 6061-T6 Aircraft Grade Aluminum. This specification suggests a lightweight yet strong material, typical for firearm accessories. In theory, this provides a good balance of durability and weight savings, which is desirable for a pistol-mounted accessory.
  • Finish: Matte Black. This is a standard and practical finish for firearm components, offering a non-reflective surface that blends well with most pistol aesthetics and helps prevent glare.
  • Compatibility: Advertised for SIG P-Series of Double Stack Pistols. This is the core claim that, in my experience, proved to be inaccurate for the SIG P320 M18.
  • Red Dot Sights-Footprint: Docter. This specifies the footprint compatibility for red dot sights that can be mounted onto this adapter. This is a crucial detail for anyone looking to attach a specific micro red dot.
  • Saddle Height: 0.16″. This measurement relates to how high the optic will sit above the mounting surface. A lower saddle height is generally preferred for co-witnessing with iron sights if possible, or simply for a more natural sight picture.
  • Length: 1.84″. This indicates the overall length of the mount.
  • Width: 1.10″. This refers to the width of the mount.
  • Installation Hardware and Tools Included: This suggests a user-friendly installation, assuming the mount actually fits the intended firearm.

The aircraft-grade aluminum is a positive specification on paper, offering potential for good durability. The matte black finish is also standard and functional. However, the critical specification of compatibility with SIG P-Series Double Stack Pistols is where the Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail failed in my hands. The advertised length and width, while seemingly reasonable, did not translate into a secure or functional fit on a SIG P320 M18.

Performance & Functionality

As previously detailed, the performance and functionality of this mount were severely compromised by its inability to fit correctly. The primary job of this mount is to securely attach a red dot sight to the firearm’s rear sight dovetail. It failed at the very first step: fitting securely into the dovetail and aligning with the necessary mounting points.

The lack of proper fitment meant that it couldn’t even begin to perform its intended function. The critical issue with the chamber indicator falling out and the misaligned mounting holes are not minor inconveniences; they are fundamental failures that render the product unusable for its stated purpose on the P320. Considering its low price, one might expect some compromises, but a complete inability to fit the intended firearm is a major red flag.

Design & Ergonomics

From a purely aesthetic and basic design perspective, the mount looks the part. The 6061-T6 aircraft grade aluminum construction, when held, feels reasonably solid, and the matte black finish is clean and unobtrusive. It presents itself as a straightforward, utilitarian piece of equipment.

The “super slim” moniker seems accurate in terms of its profile, which would be beneficial if it could be properly installed. The ergonomics are, however, entirely dictated by its fitment. Since it doesn’t fit, there are no practical ergonomic benefits to discuss. The concept of replacing the rear sight dovetail for optic mounting is sound, but the execution in this specific instance was deeply flawed. The design simply does not translate into practical usability for the target firearm.

Durability & Maintenance

Given the immediate fitment issues, assessing the long-term durability and maintenance of the Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail is not possible. There were no signs of damage upon arrival, suggesting that the material itself might be robust. However, durability is moot if the product cannot be reliably installed and used.

If it had fit, the minimal profile would likely make it easy to clean around, and the aluminum construction would typically resist corrosion. For a component that replaces a rear sight, it would generally not require specialized maintenance beyond occasional cleaning. The potential points of failure would likely be the screw threads if overtightened or stripped, or the dovetail interface itself if the fit was too loose or too tight, leading to damage.

Accessories and Customization Options

The product description states that installation hardware and tools are included. This implies that the necessary screws and potentially a small tool for installation should come within the packaging. This is a thoughtful inclusion, as it aims to make the product ready for immediate use right out of the box, provided it fits.

Regarding customization of the mount itself, there are no obvious options. It’s a fixed piece designed for a specific purpose. The customization comes in what optic you choose to mount onto it, given its Docter footprint. Users would need to ensure their chosen micro red dot sight utilizes this specific footprint for compatibility. This lack of user-adjustable features or modularity is typical for such a small, specialized component.

Pros and Cons of Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail

Based on my direct experience and the product’s advertised specifications versus reality:

Pros

  • Potentially Durable Material: Constructed from 6061-T6 aircraft grade aluminum, suggesting good strength and low weight.
  • Aesthetically Pleasing Finish: The matte black finish offers a standard, non-reflective appearance suitable for firearms.
  • Includes Installation Hardware: Comes with necessary installation hardware and tools, aiming for a convenient setup experience.
  • Specific Red Dot Footprint: Designed for the Docter footprint, which is a common standard for certain micro red dot sights.
  • Aggressively Priced: The low price point makes it an attractive option on paper for budget-conscious buyers.

Cons

  • Critical Fitment Failure on SIG P320: Does not fit SIG P320 models as advertised, specifically failing to align mounting holes and cover the chamber indicator slot.
  • Compromises Safety Features: Its improper fit can lead to the chamber indicator falling out, directly impacting firearm safety.
  • Non-Functional for Intended Purpose: Due to fitment issues, it cannot securely or safely mount an optic on the P320.
  • Misleading Compatibility Claims: The advertised compatibility with SIG P-Series double-stack pistols appears to be inaccurate for the P320 platform.


Who Should Buy Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail?

Given my experience, I find it difficult to recommend the Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail for SIG P320 owners. The primary reason for purchase would be to mount a Docter-footprint optic onto a SIG P320 via the rear sight dovetail. However, the critical failure to fit the SIG P320 M18, a popular variant of the P320, makes it a risky proposition for anyone using that platform, or potentially other SIG P-Series models.

If you own a SIG P-Series pistol other than a P320 and have confirmed through extensive independent research (not just manufacturer claims) that this mount does properly fit your specific model and align correctly, then it might be a budget-friendly option. For P320 owners, however, I would strongly advise looking at alternative mounting solutions. These might include slide-milled solutions, adapter plates from reputable manufacturers that offer guaranteed fitment, or mounts designed specifically for the P320’s optic-ready slide cuts if your firearm has them. Do not purchase this expecting it to be a simple drop-in for a P320.

Conclusion on Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail

The Leapers UTG Super Slim RDM20 Mount – SIG P-Series Rear Sight Dovetail represents a classic case of “you get what you pay for,” with the caveat that in this instance, what you get is fundamentally unusable for its stated purpose on a popular firearm. While the materials are adequate and the price is undeniably low, the critical failure in fitment on the SIG P320 M18 renders it a non-starter. The fact that it not only failed to mount but also compromised a safety feature of the firearm is deeply concerning.

The value proposition is severely undermined by its lack of compatibility. Even at $7.15, it’s too expensive if it doesn’t work. For P320 owners seeking an optic solution, exploring more robust and definitively compatible mounting systems, even at a higher cost, is the prudent path. I cannot recommend this mount for use on the SIG P320. Buyers looking for a Docter-footprint mount for other SIG P-Series models would need to conduct thorough due diligence to ensure compatibility before considering this product.

Leave a Comment