Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail Review

Meet the Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail: First Thoughts

As a gear and equipment specialist with over a decade of hands-on experience across diverse environments, I’ve learned to approach new acquisitions with a critical eye. The Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail landed on my workbench due to a persistent desire to optimize my S&W M&P pistol for red dot capability without resorting to slide milling. My goal was a clean, reliable mounting solution that didn’t compromise the firearm’s integrity. Initial impressions of this optic mount were met with a healthy dose of skepticism, typical for any budget-friendly accessory. The simple, anodized aluminum construction offered a no-frills appearance, which I found somewhat reassuring. I had briefly considered more expensive, custom-machined alternatives, but the sheer cost differential pushed me towards this Leapers UTG offering. My immediate hope was for a functional, if unexciting, addition to my firearm.


Real-World Testing: Putting Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail to the Test

First Use Experience

My testing for this mount was straightforward: direct installation onto a Smith & Wesson M&P double-stack pistol, specifically replacing the factory rear sight. The intended scenario was range use, evaluating its ability to hold zero with a compatible micro red dot sight, in this case, the UTG RDM20 it’s designed for. I anticipated a snug fit into the rear sight dovetail, a prerequisite for any stable optic mount. However, the very first moment of installation revealed a significant issue: the adapter was notably loose within the S&W M&P’s dovetail.

Extended Use & Reliability

Due to the initial poor fit, extended use was unfortunately curtailed. The looseness meant that any attempt to mount an optic would be inherently unstable, rendering it unreliable for any practical application, from plinking on the range to more demanding defensive drills. The durability and maintenance aspects are difficult to assess when the fundamental function – a secure fit – is absent from the outset. Compared to other dovetail mounts I’ve used on various firearms, this particular model immediately signaled a deviation from acceptable quality standards.

Breaking Down the Features of Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail

Specifications

The Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail is constructed from 6061-T6 aircraft-grade aluminum, a standard material for firearm accessories, promising a balance of strength and light weight. Its matte black finish provides a non-reflective surface, crucial for maintaining a low profile. The mount is specifically designed for Smith & Wesson M&P double-stack pistols, intending to utilize the rear sight dovetail for mounting. It features a Docter footprint, indicating compatibility with red dot sights using that particular mounting pattern. The reported dimensions are a 0.16″ saddle height, 1.84″ length, and 1.10″ width, aiming for a low-profile integration. Installation hardware and tools are included, which is a welcome inclusion for a budget accessory.

Performance & Functionality

In its primary function of securely attaching to a firearm’s dovetail, this mount fails. The looseness observed during installation is a critical flaw. A mounting system that doesn’t fit tightly within the intended slot cannot reliably hold an optic, leading to zero shift and potential failure under recoil. This fundamentally compromises its intended purpose. Its strengths, such as being made of aluminum and having a matte finish, are entirely negated by the primary performance deficiency. It does not meet the basic expectation of a secure, stable fit.

Design & Ergonomics

The design of the Leapers UTG Super Slim RDM20 Mount aims for a low-profile integration, characteristic of many modern optic mounts. The use of aircraft-grade aluminum suggests a generally robust construction for its class. However, the ergonomics and usability are severely hampered by the improper fit. There is no discernible learning curve, but rather an immediate understanding of its inadequacy due to the lack of a tight fit within the dovetail. The design, while conceptually sound for mounting a Docter-footprint optic, is let down by manufacturing tolerances that prevent a secure engagement with the S&W M&P’s rear sight cut.

Durability & Maintenance

Assessing the long-term durability and maintenance of this specific mount is challenging given its immediate functional failure. In theory, aircraft-grade aluminum should offer good resistance to wear and corrosion under normal use. However, even the most durable materials cannot compensate for a poor fit. The primary concern for durability would be the potential for excessive movement within the dovetail to cause damage to both the mount and the firearm’s slide over time. Proper maintenance would involve standard cleaning, but its inability to properly seat renders detailed maintenance considerations moot.

Accessories and Customization Options

The Leapers UTG Super Slim RDM20 Mount comes with essential installation hardware and tools, which is a thoughtful inclusion. Its design is tailored to accommodate red dot sights with a Docter footprint, a common but not universal standard. This means it is not directly compatible with Aimpoint, Trijicon RMR, or other common optic footprints without an intermediary adapter plate, which would further complicate an already precarious mounting solution. There are no further customization options inherent to the mount itself, beyond the choice of optic.

Pros and Cons of Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail

Pros

  • Constructed from aircraft-grade aluminum: Promises a degree of durability and light weight.
  • Designed for specific S&W M&P models: Offers a direct-fit approach for certain firearms.
  • Includes installation hardware and tools: A convenient all-in-one package for initial setup.
  • Low-profile design: Aims to integrate cleanly with the firearm’s slide.
  • Matte black finish: Provides a non-reflective and aesthetically pleasing appearance.

Cons

  • Significantly loose fit in the S&W M&P rear sight dovetail: This is a critical flaw rendering it unreliable.
  • Poor manufacturing tolerances: Directly leads to the insecure fit and functional failure.
  • Potential for zero shift and firearm damage: Due to the inherent instability of the mount.
  • Unsuitable for any serious application: Its unreliability disqualifies it for defensive or target shooting use.


Who Should Buy Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail?

Frankly, I cannot recommend the Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail to any user for any purpose. Its fundamental failure to achieve a secure fit within the S&W M&P’s rear sight dovetail makes it entirely unsuitable for mounting an optic. Even for someone seeking a purely cosmetic, non-functional addition, the risk of damage to their firearm or a compromised optic mounting is too high. Anyone looking for a reliable red dot mounting solution for their S&W M&P pistol should look at alternative methods, such as professionally milled slides, dedicated optics-ready slides, or higher-quality aftermarket mounts that are known to have precise tolerances. It is advisable to invest in solutions that prioritize firearm safety and performance over an immediate, low-cost option.

Conclusion on Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail

The Leapers UTG Super Slim RDM20 Mount – S&W M&P Rear Sight Dovetail, despite its inexpensive price point, fails to deliver on its most basic promise: a secure and stable mount for a red dot sight. My experience, unfortunately, mirrored the user feedback of a loose fit, which is a disqualifying defect for any firearm accessory intended to hold an optic. While the material and finish are acceptable on paper, they cannot overcome the fundamental issue of poor manufacturing tolerances leading to an unreliable fit. Given this critical flaw, the value proposition is non-existent, as its intended function is rendered impossible. I cannot recommend this product; buyers seeking an optic mounting solution for their S&W M&P should explore more reliable and precisely manufactured alternatives, even if it means a higher initial investment.

Leave a Comment