The Real-Use Review: Garrett Coil Cover 10×14″ 1606400
Metal detecting isn’t just a hobby for me; it’s a passion that’s taken me across varied terrains, from sun-baked beaches to dense, muddy forests. Protecting my investment – my metal detector and its coil – is paramount, and that’s where the Garrett Coil Cover 10×14″ 1606400 comes in. This unassuming piece of plastic is more crucial than many detectorists realize, acting as the first line of defense against the harsh realities of the hunt.
Years of experience have taught me that even the most rugged coils are vulnerable. Rocks, roots, and abrasive soil can inflict significant damage, leading to reduced performance and costly repairs. The Garrett Coil Cover promises to shield against these threats, ensuring that my Garrett detector continues to perform optimally.
The Garrett Coil Cover 10×14″ 1606400 arrived in a simple, no-frills package. The plastic felt sturdy enough, though I was initially concerned about its weight. Picking it up, it felt lightweight, but durable and flexible.
Compared to generic coil covers I’ve used in the past, the Garrett cover seemed to have a tighter, more precise fit, suggesting better protection. I’ve previously used universal coil covers from brands like DetectorPro and a no-name Amazon special, but they always felt a bit loose and tended to trap debris underneath. The Garrett seemed to promise a closer fit.
My first impression was cautiously optimistic; it seemed like a worthwhile investment. It was designed specifically for the Garrett coil.
Real-World Testing: Putting Garrett Coil Cover 10×14″ 1606400 to the Test
First Use Experience
My first test was on a relic hunting trip to an old Civil War site known for its rocky terrain and dense undergrowth. I attached the Garrett Coil Cover 10×14″ 1606400 to my Garrett AT Pro with the 10×14″ coil before even leaving the truck. The cover fit snugly, requiring a bit of maneuvering, but once on, it felt secure.
The ground was a mix of dry, hard-packed dirt and loose shale. The coil cover encountered its fair share of scrapes and bumps. The Garrett Coil Cover protected my coil from damage.
The coil cover didn’t seem to hinder the detector’s performance at all. I was concerned that it might impact the depth or sensitivity, but I detected a few buttons and bullets, all without a noticeable difference compared to previous hunts without the cover. It slipped once or twice in very wet conditions, so that is a potential weakness.
Extended Use & Reliability
After several months of use, the Garrett Coil Cover 10×14″ 1606400 has proven to be a reliable and worthwhile addition to my gear. It’s been through beaches, parks, and forests without cracking or showing significant wear. It has also held up under extreme heat and cold, and I don’t see any degradation.
The only visible wear is some minor scratching on the bottom of the coil cover, which is exactly what it’s designed for. The coil itself remains pristine. It provides complete protection.
Cleaning is easy; a quick rinse with water and a scrub with a brush is all it takes. It has definitely outperformed the generic coil covers I’ve used in the past, which often cracked or became brittle after extended use. The investment has been worth it.
Breaking Down the Features of Garrett Coil Cover 10×14″ 1606400
Specifications
-
The Garrett Coil Cover 10×14″ 1606400 is designed specifically for Garrett metal detectors utilizing a 10×14″ coil. This ensures a snug and secure fit.
-
The cover is constructed from a durable, impact-resistant plastic material. This protects the coil from scratches, scrapes, and impacts during use.
-
It weighs approximately 4 ounces. This adds minimal weight to the detector, ensuring comfortable operation for extended periods.
-
It is designed to allow the metal detector’s signals to transmit and receive without significant interference. Its purpose is protection without hindering performance.
-
The cover features a smooth, contoured design. It helps it glide over uneven terrain without snagging.
These specifications are important because they directly impact the longevity and performance of the metal detector coil. A damaged coil can significantly reduce detection depth and accuracy.
Performance & Functionality
The Garrett Coil Cover 10×14″ 1606400 performs its job admirably, protecting the coil from damage without noticeably affecting performance. It’s a simple but effective solution.
The primary strength is its perfect fit and durable construction. A minor weakness is that it needs to be removed to clean.
The Garrett Coil Cover 10×14″ 1606400 meets my expectations, it does what it’s supposed to do. I did not expect such a basic part to make metal detecting more enjoyable.
Design & Ergonomics
The build quality is solid, with the plastic feeling both durable and lightweight. It is designed specifically for the Garrett 10×14″ coil, ensuring a perfect fit.
There’s no learning curve; it’s simply a matter of sliding the cover onto the coil. It’s intuitive and hassle-free.
Durability & Maintenance
The Garrett Coil Cover 10×14″ 1606400 is designed to withstand regular use and exposure to the elements. Its durability ensures a long lifespan, making it a worthwhile investment.
Maintenance is simple: just rinse it with water and scrub it if necessary.
Accessories and Customization Options
The Garrett Coil Cover 10×14″ 1606400 doesn’t come with any additional accessories, nor does it require any customization. It is a standalone product.
It is compatible with the specified coil size, but not generally compatible with other coils. Check the Garrett website to make sure that you are buying the proper coil cover for your metal detector.
Pros and Cons of Garrett Coil Cover 10×14″ 1606400
Pros
- Perfect fit for Garrett 10×14″ coils.
- Durable, impact-resistant plastic construction.
- Lightweight design that doesn’t hinder performance.
- Simple to install and maintain.
- Significantly extends the life of the coil.
Cons
- Must be removed for thorough coil cleaning.
- Can potentially slip in very wet conditions if not secured tightly.
Who Should Buy Garrett Coil Cover 10×14″ 1606400?
This coil cover is perfect for metal detectorists who frequently hunt in rough or abrasive terrain. It is also ideal for those who want to protect their investment and extend the lifespan of their Garrett metal detector coil.
Those who only occasionally metal detect in soft soil might find it less essential. However, for anyone serious about protecting their equipment, this is a worthwhile addition. A coil cover can be viewed as an insurance policy that extends the life of your metal detector.
A must-have accessory is a small brush for cleaning dirt and debris from both the coil and the inside of the cover.
Conclusion on Garrett Coil Cover 10×14″ 1606400
The Garrett Coil Cover 10×14″ 1606400 is a simple but essential accessory for any serious metal detectorist using a Garrett detector with a 10×14″ coil. It provides reliable protection.
The price of $19.99 is justified, especially considering the cost of replacing a damaged coil. It is a small price to pay.
I would definitely recommend the Garrett Coil Cover 10×14″ 1606400 to anyone looking to protect their investment and ensure optimal performance from their metal detector. Don’t wait until your coil is damaged; invest in a coil cover today!