GG&G Benelli M2 Scope Mount Review

Why the GG&G Benelli M2 Scope Mount Might Be Right for You

For anyone looking to reliably outfit their Benelli M2 shotgun with an optic, the GG&G Benelli M2 Scope Mount presents itself as a no-nonsense solution. Manufactured by GG&G, a company known for its robust tactical accessories, this mount promises a secure and low-profile platform. My own search for a stable optic solution for my M2 stemmed from a desire to improve target acquisition speed without compromising the shotgun’s inherent balance. While I considered a few other options, including some more complex rail systems, the direct-mount approach of this GG&G piece was appealing for its simplicity and purported ease of installation. Upon arrival, my initial impression was one of solid, purposeful engineering; it felt precisely what it claimed to be – a direct interface between the shotgun receiver and a tactical scope.

Real-World Testing: Putting the GG&G Benelli M2 Scope Mount to the Test

First Use Experience

My initial encounter with the GG&G Benelli M2 Scope Mount took place in my workshop, the perfect environment for meticulous installation and initial inspection. The shotgun receiver, already drilled and tapped, provided a clean slate for mounting. The process was straightforward: align the mount, insert the provided Torx screws, and tighten them down.

Under the workshop lights, I tested the mount’s stability by gently rocking it. There was absolutely no give, which immediately instilled confidence. I didn’t expose it to extreme conditions initially, opting for a controlled environment to ensure a perfect fit before subjecting it to harsher realities.

Ease of use was a significant factor here. The intuitive design meant no fiddling with complex instructions; it was clear where each screw went and how it integrated with the receiver. My only minor surprise was the slight heft of the steel screws, which felt substantial but well-suited to the task.

Extended Use & Reliability

After a few weeks and several range sessions, the GG&G Benelli M2 Scope Mount has proven its mettle. It’s remained steadfastly in place through repeated firing of various 12-gauge loads, from light birdshot to heavier buckshot.

There are no visible signs of wear and tear; the Type III hard coat anodized finish has shrugged off minor scuffs and shows no indication of chipping or fading. Its low profile has also held up, meaning it hasn’t snagged on anything during handling or transport.

Maintenance has been virtually non-existent, which is precisely what you want in a rifle-mounted accessory. A quick wipe-down with a dry cloth is all that’s ever been needed. Compared to some of the more rudimentary mounts I’ve used in the past, this GG&G unit feels substantially more durable and reliable.

Breaking Down the Features of the GG&G Benelli M2 Scope Mount

Specifications

The GG&G Benelli M2 Scope Mount is precision machined from 6061-T6 billet aluminum, a material chosen for its excellent strength-to-weight ratio. This forms the foundation of its low profile design, ensuring that your optic sits as close to the receiver as possible, which is crucial for maintaining a natural cheek weld. Its MIL-STD-1913 configuration means it’s designed to accept a wide range of tactical scopes and accessories that utilize the Picatinny rail standard.

The mount measures 4.5″ in length, providing ample real estate for most tactical scope diameters. Despite its robust construction, it weighs in at a mere 1.2 oz, contributing minimally to the overall weight of your Benelli M2. The Type III hard coat anodized finish in a non-reflective matte black not only enhances durability but also helps prevent glare during operation.

Performance & Functionality

The primary function of this scope mount is to provide a stable and secure platform for optics on your Benelli M2. In this regard, the GG&G Benelli M2 Scope Mount excels. It creates a rigid connection between the factory-drilled and tapped receiver and your scope, eliminating any potential for shift or play.

This direct-mount approach ensures that your optic maintains its zero, even under the significant recoil generated by a 12-gauge shotgun. Its low profile design is a significant strength, allowing for a much more natural and comfortable shooting position compared to taller mounts. This translates directly to faster target acquisition and improved accuracy under pressure.

The only functional limitation, which is inherent to its low-profile nature, is that it might not be compatible with scopes featuring very large objective bells or those that require higher mounting heights for comfortable eye relief without a dedicated adjustable stock. However, for most standard tactical scopes, its functionality is exceptional.

Design & Ergonomics

GG&G has clearly put thought into the design of this scope mount. The one-piece construction from 6061-T6 billet aluminum contributes to its overall sturdiness and eliminates potential failure points found in multi-part designs. The MIL-STD-1913 configuration is a standard that shooters have come to rely on for compatibility.

Ergonomically, the most notable feature is its low profile design. This is not just about aesthetics; it directly impacts the shooter’s experience by allowing for a much more comfortable and consistent cheek weld. Furthermore, the edges are smoothed and rounded, a thoughtful detail that prevents snagging on clothing or gear and enhances shooter safety.

The matte black, Type III hard coat anodized finish is not only durable but also provides a tactical appearance that blends well with most shotgun setups. The steel Torx head screws used for attachment feel robust and inspire confidence that they will hold up to repeated tightening and loosening.

Durability & Maintenance

Durability is clearly a cornerstone of the GG&G Benelli M2 Scope Mount‘s design. The use of high-quality 6061-T6 billet aluminum and Type III hard coat anodization suggests a product built to withstand the rigors of regular use. The smooth, rounded edges also mean there are fewer points for dirt and grime to accumulate, simplifying cleaning.

Maintenance is almost an afterthought. Aside from occasional wiping to remove dust or debris, there’s little to do. The steel Torx head screws are resistant to corrosion, and the anodized finish protects the aluminum body.

While I haven’t experienced any failure points, the lifetime warranty offered by GG&G provides an additional layer of reassurance regarding its long-term durability. This indicates the manufacturer’s confidence in their product’s longevity and robust construction.

Accessories and Customization Options

The GG&G Benelli M2 Scope Mount is designed as a standalone component for mounting a scope. It doesn’t come with additional accessories in the traditional sense. Its primary “customization” aspect lies in its MIL-STD-1913 configuration, which ensures compatibility with a vast array of aftermarket tactical scopes and rings.

The inclusion of steel Torx head screws and a Torx wrench means that everything needed for installation is provided, which is a convenient touch. This eliminates the need for immediate trips to the hardware store. The mount itself doesn’t offer adjustable cant or other user-configurable features, focusing instead on providing a solid, fixed mounting point.

Pros and Cons of the GG&G Benelli M2 Scope Mount

Who Should Buy the GG&G Benelli M2 Scope Mount?

This scope mount is an excellent choice for Benelli M2 shotgun owners who are looking to mount a tactical scope and prioritize a low-profile, stable, and reliable platform. It’s ideal for those who understand that a proper cheek weld is crucial for accurate shooting and want their optic situated as close to the bore axis as possible. It’s particularly well-suited for individuals who might use their M2 for roles where speed and consistent handling are paramount, such as competitive shooting disciplines or defensive applications, provided the optic choice complements the low mounting height.

Those who might want to skip this mount are shooters who prefer a significantly higher optic position for their Benelli M2, perhaps due to specialized stock setups or specific optic requirements that demand more clearance. If you’re looking for a mount with adjustable cant or one that offers extensive rail real estate beyond the immediate scope mounting area, other solutions might be more appropriate. For optimal use, pairing this mount with a scope that has appropriate objective lens diameter and eye relief for a low mount is highly recommended.

Conclusion on the GG&G Benelli M2 Scope Mount

The GG&G Benelli M2 Scope Mount stands out as a purpose-built accessory that delivers on its promises. It provides a remarkably stable and low-profile foundation for mounting a tactical scope onto a Benelli M2 shotgun. The precision machining and robust 6061-T6 billet aluminum construction are evident, offering a combination of strength and light weight that doesn’t compromise the shotgun’s handling. Its MIL-STD-1913 configuration ensures broad compatibility, and the thoughtful design elements, like rounded edges, speak to GG&G’s attention to detail.

Considering its price point of $39.99, the value proposition is exceptionally strong. It offers a level of quality and reliability that punches well above its weight class. For the Benelli M2 owner seeking a direct, no-fuss solution to securely mount an optic without adding unnecessary bulk or height, the GG&G Benelli M2 Scope Mount is a highly recommended investment. It provides peace of mind that your optic will remain precisely where you zeroed it, shot after shot.