Sticky Holsters Travel Mount Review

How the Sticky Holsters Travel Mount Performed Under Pressure

For anyone who carries a firearm and values having it accessible but not necessarily on their person at all times, the Sticky Holsters Travel Mount presents an intriguing solution. Manufactured by Sticky Holsters, this accessory aims to bridge the gap between concealment and immediate reach. It’s designed to affix your Sticky Holster and firearm to various surfaces, offering a dedicated spot when you’re in your vehicle, at your desk, or by your bedside.

My initial need for this product stemmed from a common scenario: transitioning from carrying to being at home or in my workshop. I found myself placing my firearm, still in its Sticky Holster, precariously on a nightstand or tucked into the side of a console, which felt less than ideal. I considered a simple velcro strap system or a more permanent fixture, but neither felt as seamless as the Sticky approach.

Upon receiving the Travel Mount, my first impression was one of straightforward utility. It’s a simple, flat piece of material with an adhesive backing and a larger, receptive surface for the Sticky Holster’s signature grip. The material felt durable, and the included adhesive strip promised strong bonding. My initial reaction was a quiet sense of satisfaction, anticipating a cleaner, more organized solution to a recurring minor annoyance.

Real-World Testing: Putting Sticky Holsters Travel Mount to the Test

First Use Experience

I decided to test the Sticky Holsters Travel Mount in a few key environments that mirrored my daily routines. The primary location was the inside of my vehicle’s center console. I meticulously cleaned and dried the plastic surface as per the instructions before applying the mount.

The adhesion was immediate, and the mount felt firmly planted. I then attached my firearm in its Sticky Holster to the mount. It held without issue, even with the slight jostling of a typical drive. I also experimented with attaching it to my workshop workbench, a different material but also clean and dry. Again, the adhesive held exceptionally well.

Ease of use was a significant positive. There was no complex setup or learning curve; it was as simple as peel, stick, and attach your holster. The only minor surprise was the slightly greater tactile feel of the adhesive strip than I might have anticipated through the material, but this is a minor point.

Extended Use & Reliability

After several weeks of consistent use, the Sticky Holsters Travel Mount has proven to be remarkably reliable. The mount remains firmly attached to both the center console and the workbench, showing no signs of loosening or peeling, even with the daily removal and reattachment of my firearm. This durability is crucial for a product designed to hold a firearm securely.

There are no noticeable signs of wear and tear on the mount itself. The synthetic finish is holding up well, and the receptive surface for the holster still provides a good grip. Maintenance has been virtually nonexistent; a quick wipe with a damp cloth if it collects any dust is all that’s been needed.

Compared to past experiences, this mount offers a superior solution to generic adhesive hooks or even makeshift solutions. It’s designed specifically for the Sticky Holster system, which makes it far more effective than attempting to adapt other methods.

Breaking Down the Features of Sticky Holsters Travel Mount

Specifications

The Sticky Holsters Travel Mount comes with specific dimensions designed for broad utility: 8″ Tall X 5 3/4″ Wide. This generous size accommodates most standard Sticky Holsters with ease, ensuring a secure and stable connection. It includes ONE 4″x 6″ adhesive strip, which is a robust industrial-grade adhesive designed for strong, long-lasting bonding.

The synthetic finish of the mount is practical, offering a good grip for the holster’s sticky material. It’s rated for use in temperatures between -30°F to 140°F, making it suitable for a wide range of environmental conditions, from cold garages to warmer vehicles. However, it is not recommended for fabrics, dashboards, flexible vinyl, or underwater use, as these surfaces can compromise adhesion or be damaged by the adhesive.

Performance & Functionality

The primary job of the Sticky Holsters Travel Mount is to provide a secure, off-body location for your firearm when it’s not being carried. In this regard, it performs exceptionally well. The combination of the mount’s surface and the Sticky Holster’s material creates a surprisingly strong bond that resists accidental dislodging.

Its key strength lies in its simplicity and effectiveness for its intended purpose. There are no complex mechanisms or failure points. However, its limitations are also clear: it requires a smooth, non-porous, and rigid surface for optimal adhesion. It is also universal in its application to surfaces, but Sticky Holster Inc. is not responsible for damage to finishes or surfaces where the adhesive is applied, which is a critical point to consider before installation.

Design & Ergonomics

The design of the Sticky Holsters Travel Mount is purely functional. It’s a no-frills, rectangular panel that prioritizes utility over aesthetics. The build quality feels solid, with a flexible yet durable synthetic material that should withstand regular use.

Ergonomically, it’s designed to be a passive holder rather than an active interface. You don’t “interact” with it directly; rather, it serves as a stable platform for your holster. The large, flat surface ensures that the Sticky Holster adheres evenly, providing maximum surface area contact for a secure hold. There’s no learning curve; if you can stick something to a wall, you can use this mount.

Durability & Maintenance

Based on my testing, the Sticky Holsters Travel Mount appears to be built for long-term durability. The synthetic material is resistant to tearing or degradation from UV exposure or moderate impacts. The adhesive strip, when applied correctly to a suitable surface, is designed for a semi-permanent bond, meaning it’s not meant to be repositioned frequently.

Maintenance is minimal. Keeping the mounting surface and the mount itself clean will ensure the best possible adhesion. For those who might consider repositioning, it’s important to note that the strong adhesive may leave residue or potentially damage certain finishes, as stated by the manufacturer. This is a product you generally install once in its desired location.

Accessories and Customization Options

The Sticky Holsters Travel Mount is quite minimalist in its accessory offerings, coming with ONE 4″x 6″ adhesive strip as its primary functional component. There are no other included accessories.

Customization options are also limited. The mount itself is a fixed size and shape, designed to work universally with Sticky Holsters. The only real “customization” would be choosing the location where you apply it, but this is heavily dependent on having an appropriate surface. It is not designed to be compatible with modular mounting systems like MOLLE or to accept different types of fasteners beyond its included adhesive.

Pros and Cons of Sticky Holsters Travel Mount

Who Should Buy Sticky Holsters Travel Mount?

The Sticky Holsters Travel Mount is an excellent addition for anyone already invested in the Sticky Holsters system who frequently needs a temporary, secure resting place for their firearm. This includes individuals who want a dedicated spot in their vehicle’s center console, on their nightstand, at their desk in a workshop or office, or even inside a boat compartment. It’s perfect for those who appreciate the brand’s unique holster technology and want to extend its utility beyond mere carry.

However, individuals seeking a universal mounting solution for non-Sticky Holsters, or those who frequently move their mounting points, should look elsewhere. Those who require extreme environmental protection (like full submersion) or who have delicate or porous surfaces where they need to mount their firearm would also be better served by different products.

For optimal use, ensuring you have a thoroughly cleaned and dry, non-porous surface is paramount. Consider purchasing additional adhesive strips if you anticipate needing to move the mount, though this is generally not recommended.

Conclusion on Sticky Holsters Travel Mount

The Sticky Holsters Travel Mount is a simple yet highly effective accessory for users of Sticky Holsters. It brilliantly extends the functionality of the brand’s system, offering a stable and convenient place to secure your firearm when it’s not on your person. Its straightforward installation and robust adhesion to suitable surfaces make it a reliable tool for organizational needs in various environments.

Considering its price point of $26.71, the value is certainly there for those who can utilize its specific design. The durability and the secure grip it offers are significant advantages. I would personally recommend the Sticky Holsters Travel Mount to any existing Sticky Holsters user who finds themselves in need of a dedicated, off-body firearm storage solution. Just be mindful of the surface you intend to mount it on; a little preparation goes a long way to ensuring its effectiveness and longevity.