True Results from the Strike Industries Glock Extended Magazine Floor Plate
For a long time, I’d been running my Glock 19 magazines at their standard capacity, which, while adequate, always left me with a nagging desire for just a little more. In the workshop, on the bench, or during those occasional training days, the thought of another few rounds in reserve was always present. The Strike Industries Glock Extended Magazine Floor Plate promised to address this, offering a tangible increase in capacity without fundamentally altering the core function of my magazines. Upon receiving the product, my initial impression was of a well-engineered piece of polymer and steel, feeling robust and thoughtfully designed. I had briefly considered some bulkier aluminum extensions, but the sleek, low-drag profile of this particular model caught my eye. My immediate reaction was one of quiet satisfaction, a sense that a simple, affordable solution to a persistent minor annoyance was finally at hand.
Real-World Testing: Putting Strike Industries Glock Extended Magazine Floor Plate to the Test
First Use Experience
My initial testing grounds were primarily my workbench and a familiar, albeit informal, indoor range setup. The primary objective was to see how easily the extended magazine plate could be installed and how it affected magazine seating and reliability with freshly loaded rounds. I installed the first unit on a standard 15-round Glock 19 magazine, and the process, while requiring a firm hand to remove the original plate, was straightforward. The included steel locking plate seemed robust, and the polymer extension fit snugly. Performance-wise, the magazine seated with a satisfying click, and I was able to load the full +5 rounds after a bit of practice. One unexpected quirk was the slight rattle when the magazine was fully loaded and uninserted; it was minimal but noticeable.
Extended Use & Reliability
Over the course of several weeks and numerous range trips, this Strike Industries Glock Extended Magazine Floor Plate proved itself to be remarkably resilient. I’ve deliberately dropped loaded magazines onto concrete (twice, accidentally) and have yet to see any significant degradation in the polymer or the locking mechanism. The added rounds have consistently fed without issue, and the low-drag design has indeed meant no snags when performing reloads, even under slight pressure. Cleaning is as simple as disassembling the magazine, which is a familiar process for any Glock owner. Compared to some generic, cheaper extensions I’ve encountered in the past that either cracked or failed to reliably feed, these units from Strike Industries have demonstrated superior longevity and consistent performance, especially considering their accessible price point.
Breaking Down the Features of Strike Industries Glock Extended Magazine Floor Plate
Specifications
The Strike Industries Glock Extended Magazine Floor Plate is constructed from a durable, impact-resistant polymer for the main body, paired with a steel locking plate. This combination is designed to enhance magazine capacity for the 9mm Luger caliber, specifically for the Glock 19 model. It boasts a +5 round capacity extension over standard OEM double-stack magazines. The design emphasizes a low drag/no snag profile, ensuring smooth reloads. The inclusion of a special steel locking plate with a hook design adds extra locking security for increased reliability, a feature that sets it apart from many simpler floor plates. This focus on robust materials and secure fastening is crucial for maintaining feeding reliability, especially when fully loaded.
Performance & Functionality
In its core function, the Strike Industries Glock Extended Magazine Floor Plate delivers precisely what it promises: added capacity and smooth operation. The ability to add five extra rounds to a Glock 19 magazine is a significant improvement for those who can utilize the extra rounds. Reloads feel fluid, and the extension’s profile prevents it from catching on gear or clothing, which is a critical advantage in dynamic situations. The consistent feeding of the additional rounds is a testament to the design and the included stronger spring. However, it’s worth noting that fully loading the extension to its maximum capacity can require a firm press and a practiced technique to seat the rounds completely.
Design & Ergonomics
The design of this extended magazine plate prioritizes functionality and minimal interference. Its low drag/no snag profile is its most visually striking feature, with smooth, rounded edges that eschew sharp angles. The impact-resistant polymer feels substantial and well-molded, with no rough seams or imperfections. While it adds bulk to the base of the magazine, it does so in a way that feels controlled rather than cumbersome. The grip surface on the extension itself is minimal, as it’s not intended for primary grip, but it doesn’t impede magazine insertion. The steel locking plate, though hidden, speaks to the thought put into securing the added rounds reliably.
Durability & Maintenance
Based on my testing, the Strike Industries Glock Extended Magazine Floor Plate appears to be built for sustained use. The impact-resistant polymer has held up well against minor impacts and general handling. Given its construction, I anticipate a long service life for this unit, especially with proper care. Maintenance is straightforward; it’s essentially part of the magazine’s cleaning routine. Disassembly and reassembly are simple, provided you have the correct tool to depress the follower and remove the locking plate. There are no complex mechanisms to worry about, which contributes to its overall robustness and ease of care.
Accessories and Customization Options
The Strike Industries Glock Extended Magazine Floor Plate comes with the essential locking steel plate and a slightly stronger recoil spring. This is a crucial detail, as standard springs might struggle to reliably push the additional rounds upwards. While the product itself is a direct upgrade to the magazine base, it doesn’t inherently offer further customization in terms of color or material beyond the standard black polymer finish. However, its design is such that it integrates seamlessly with OEM Glock magazines, effectively acting as a specialized component rather than a complete magazine replacement.
Pros and Cons of Strike Industries Glock Extended Magazine Floor Plate
Pros
- Adds a significant +5 round capacity to compatible Glock 19 magazines.
- Low drag/no snag design ensures smooth reloads without catching on gear.
- Constructed from impact-resistant polymer for durability.
- Includes a steel locking plate with a hook design for enhanced security and reliability.
- Excellent value for the price, offering substantial capacity increase at an affordable cost.
- Easy to install and integrate with OEM Glock magazines.
Cons
- Fully loading to the maximum capacity can require a learning curve and firm pressure.
- A slight rattle can be heard when the fully loaded magazine is unseated.
- Primarily designed for 9mm Glock 19, so compatibility with other models or calibers is limited.
Who Should Buy Strike Industries Glock Extended Magazine Floor Plate?
This extended magazine plate is an ideal choice for Glock 19 owners who frequently engage in range training, competitive shooting, or simply desire greater ammunition capacity for self-defense. For those who value practical upgrades that enhance functionality without compromising reliability, this Strike Industries Glock Extended Magazine Floor Plate is a solid recommendation. It’s particularly well-suited for individuals looking for an affordable way to increase their firearm’s utility. However, users who prioritize ultra-compact magazine dimensions or require compatibility with non-9mm Glock models should look elsewhere. For those who choose this plate, ensuring you have a firm grip and consistent technique for seating the final rounds will make the experience smoother.
Conclusion on Strike Industries Glock Extended Magazine Floor Plate
The Strike Industries Glock Extended Magazine Floor Plate is a highly effective and well-conceived accessory that genuinely enhances the utility of a Glock 19. It successfully delivers on its promise of increased capacity with a focus on practical, snag-free operation. The combination of durable materials and smart design, particularly the secure steel locking plate, instills confidence in its reliability. Considering its accessible price point, the value proposition is exceptional, offering a noticeable upgrade without a hefty investment. I would readily recommend this product to any Glock 19 owner looking to maximize their magazine’s potential. It’s a straightforward, reliable, and cost-effective way to get more out of your reliable sidearm.