What Happened When I Tried the Trijicon Tall Picatinny Rail Mount for RMR Sights
My quest for the perfect red dot optic setup has been a long and winding road, paved with countless hours at the range and in the field. Recently, I found myself needing to elevate my Trijicon RMR sight for a specific application on a carbine. The standard mount just wasn’t cutting it, leaving my cheekweld feeling awkward and my sight picture less than ideal. This led me to the Trijicon Tall Picatinny Rail Mount for RMR Sights, a component promising a raised platform for a more comfortable and effective aiming solution. My initial impression upon unboxing was one of robust, no-nonsense engineering – a hallmark of anything bearing the Trijicon name. While I briefly considered a generic aftermarket mount, the desire for guaranteed compatibility and the quality I’ve come to expect from Trijicon steered me firmly towards this dedicated solution. My first thought was one of cautious optimism; this could be the missing piece to finally achieving that ideal sight picture.
Real-World Testing: Putting Trijicon Tall Picatinny Rail Mount for RMR Sights to the Test
First Use Experience
I mounted the Trijicon Tall Picatinny Rail Mount for RMR Sights onto a carbine equipped with a standard Picatinny rail system. The initial installation was straightforward, requiring only a few turns of a wrench to secure the mount to the rail. Once the RMR was attached to the mount, I immediately noticed the significant change in height. This proved invaluable during rapid target acquisition drills, allowing for a more natural heads-up shooting stance without compromising my cheek weld. The mount performed admirably through several range sessions, enduring the recoil of numerous magazine dumps without any hint of loosening or shifting. Even when exposed to light dust and grime common at outdoor ranges, its functionality remained unhindered.
Extended Use & Reliability
Over the subsequent months, this tall mount has become a permanent fixture on my carbine. It has consistently held its zero, even after being removed and reinstalled for cleaning. I’ve subjected it to various environmental conditions, including light rain and significant temperature fluctuations, and it has shown no signs of corrosion or degradation. The matte black finish has maintained its integrity, resisting minor scuffs and abrasions from routine handling and transport. Cleaning has been a simple affair; a quick wipe-down with a cloth is usually all that’s needed to keep it looking and functioning optimally. Compared to some lower-profile mounts I’ve used in the past, the reliability and consistent performance of this Trijicon unit are genuinely impressive.
Breaking Down the Features of Trijicon Tall Picatinny Rail Mount for RMR Sights
Specifications
The Trijicon Tall Picatinny Rail Mount for RMR Sights is constructed from durable metal, specifically designed for Mil-Std 1913 Picatinny rail mounting. Its matte black finish provides a non-reflective surface, crucial for maintaining a low profile. The attachment type is unequivocally Picatinny, ensuring a secure and stable lock onto standard accessory rails. This mount type is designed to be a Picatinny mount, catering to a wide array of modern firearms.
The manufacturer is, of course, the renowned Trijicon. This mount is engineered to fit all Trijicon RMR’s, although the RMR sight itself is not included. The color is a classic and functional black, and the finish is a practical matte. The fabric/material is robust metal, promising longevity and resistance to the stresses of firearm use.
These specifications translate directly into a reliable and functional product. The use of Mil-Std 1913 Picatinny ensures compatibility with a vast majority of modern rifles and carbines. The matte finish prevents unwanted glare, which is critical for maintaining a clear sight picture under various lighting conditions. The robust metal construction means this mount is built to withstand the rigors of recoil and field use without compromise.
Performance & Functionality
In terms of its primary function, elevating an RMR sight, the Trijicon Tall Picatinny Rail Mount for RMR Sights excels. It achieves a noticeable lift, which is crucial for users who require a higher sight line for comfortable shooting, especially on firearms with fixed stocks or when wearing plate carriers. This elevated position can significantly improve your ability to acquire targets quickly and maintain a consistent cheek weld.
- Strengths: The primary strength is undoubtedly the precise height it provides, making it ideal for specific shooting stances and firearm configurations. Its rock-solid lock-up on the Picatinny rail is another major advantage, ensuring the optic remains zeroed under heavy recoil. The ease of installation is also a significant plus, allowing for quick setup without specialized tools.
- Weaknesses: One potential drawback is that the height may be too much for some users, making it difficult or impossible to cowitness with standard iron sights. For individuals seeking absolute cowitness capability, this mount might be overkill. Additionally, while robust, it does add a small amount of weight compared to lower-profile mounts.
Overall, this mount performs its intended function exceptionally well. It meets, and in many cases exceeds, expectations for what a dedicated RMR mount should offer in terms of stability and improved sight picture.
Design & Ergonomics
The design of the Trijicon Tall Picatinny Rail Mount for RMR Sights is characterized by its rugged simplicity and functional aesthetics. The all-metal construction feels substantial and precisely machined, with clean lines and a well-executed matte black finish that is both durable and aesthetically pleasing. There are no superfluous elements, focusing solely on secure mounting and elevation.
Ergonomically, the mount is designed to be unobtrusive. The securing mechanism, typically a bolt or knob, is positioned in a way that minimizes interference with the firearm’s charging handle or other controls. The user feedback confirms that the locking knob can be reversed, which is a fantastic ergonomic consideration, allowing users to position it away from their primary hand or charging handle to prevent any snagging or operational interference. This attention to detail in the design makes it comfortable and practical to use, even during high-stress situations.
Durability & Maintenance
The durability of this Trijicon mount is, as expected, top-tier. Constructed from robust metal, it is designed to withstand significant abuse. The matte finish not only looks good but also provides a degree of scratch resistance, though it’s not entirely impervious to hard impacts. After extended use, I haven’t observed any structural fatigue, cracks, or significant wear.
Maintenance is refreshingly simple. Keeping it clean involves regular wiping down to remove dust, dirt, and carbon fouling. The metal construction means it won’t warp or degrade like plastic alternatives might. I have experienced no issues with seized bolts or difficult disassembly after prolonged use, a testament to the quality of the materials and manufacturing. Potential failure points are minimal, primarily limited to overtightening the mounting screws, which could strip threads, but this is a common concern with most rail-mounted accessories.
Accessories and Customization Options
The Trijicon Tall Picatinny Rail Mount for RMR Sights is primarily a single-purpose component; its main function is to provide the necessary height for the RMR sight. As such, it doesn’t come with extensive accessories. However, the key customization it offers is the reversibility of the locking knob. As noted, this allows users to tailor the mount’s configuration to their specific firearm and shooting style, ensuring optimal ergonomic function.
While no other accessories are included, its compatibility with standard Mil-Std 1913 Picatinny rails means it seamlessly integrates with virtually any firearm equipped with such a system. This universality is a significant advantage, allowing users to adapt it across different platforms without issue. The RMR sight itself, being a separate unit, offers its own set of customization options (like different reticle patterns), but these are independent of the mount’s functionality.
Pros and Cons of Trijicon Tall Picatinny Rail Mount for RMR Sights
Pros
- Provides optimal height for RMR sights: Significantly improves cheek weld and sight acquisition on many carbines.
- Robust metal construction: Built to last and withstand significant recoil and field abuse.
- Secure and stable Picatinny mounting: Locks firmly onto the rail with minimal chance of shifting.
- Reversible locking knob: Enhances ergonomic flexibility, preventing interference with charging handles.
- High-quality Trijicon build quality: Expected reliability and durability from a trusted manufacturer.
- Matte black finish: Reduces glare and maintains a low-profile appearance.
Cons
- May be too high for cowitnessing iron sights: For users needing absolute cowitness, this mount is likely too tall.
- Adds some weight: While not excessive, it’s heavier than some minimalist mounts.
- RMR sight not included: Requires a separate purchase of the RMR optic.
Who Should Buy Trijicon Tall Picatinny Rail Mount for RMR Sights?
The Trijicon Tall Picatinny Rail Mount for RMR Sights is an excellent choice for firearm enthusiasts and professionals who utilize Trijicon RMR sights on carbines, rifles, or other platforms with Picatinny rails and require a significant increase in optic height. This includes competitive shooters seeking a faster sight picture, law enforcement or military personnel who may operate with helmets or body armor that alters their natural shooting posture, and hobbyists who simply find a higher optic mount more comfortable and effective for their shooting style.
However, individuals who absolutely require the ability to cowitness their RMR with standard iron sights should probably look at lower-profile mounts. Those prioritizing the absolute lightest setup for their firearm might also find this mount adds a bit too much weight, though the durability often justifies it. For those looking to optimize their RMR setup for speed and comfort, the Trijicon Tall Picatinny Rail Mount for RMR Sights is a compelling option.
If you’re considering this mount, I’d highly recommend ensuring your carbine or rifle platform can effectively utilize the increased height. Pairing it with compatible iron sights (if needed for backup) or understanding its limitations regarding cowitness is crucial.
Conclusion on Trijicon Tall Picatinny Rail Mount for RMR Sights
The Trijicon Tall Picatinny Rail Mount for RMR Sights stands as a testament to Trijicon’s commitment to quality and functionality. It delivers precisely what it promises: a robust, reliable, and significantly elevated mounting solution for Trijicon RMR red dot sights. While its height may preclude absolute cowitness with iron sights for some users, this very characteristic is precisely what makes it invaluable for others, enabling a faster and more comfortable sight picture on a variety of firearms. The metal construction, secure Picatinny attachment, and thoughtfully designed reversible locking knob all contribute to a product that instills confidence and performs exceptionally under demanding conditions.
Considering its performance, durability, and the reputation of the Trijicon brand, the price point of $82.49 represents a solid value proposition for anyone needing this specific optic elevation. I would wholeheartedly recommend the Trijicon Tall Picatinny Rail Mount for RMR Sights to anyone who has identified the need for a higher RMR mount and prioritizes a dependable, long-lasting solution. It’s a component that enhances the usability of the RMR, making it an essential upgrade for specific tactical and practical applications.