DNZ Products BLR Short Action One Inch Scope Tube Mount Review

The DNZ Products BLR Short Action One Inch Scope Tube Mount Review No One Else Gives You

The DNZ Products BLR Short Action One Inch Scope Tube Mount promises a solid, lightweight, and streamlined solution for mounting a one-inch scope to your Browning BLR short action rifle. This mount eliminates the need for separate bases and rings, potentially enhancing accuracy and simplifying installation. I’ve spent years fiddling with various mounting systems, and the allure of a one-piece design from DNZ Products piqued my interest, especially given the inherent challenges of mounting scopes on lever-action rifles like the BLR.

My quest for this mount began after a frustrating season with a scope that constantly shifted zero on my BLR. I needed a robust and reliable system that could withstand the recoil and handling associated with hunting in dense brush. Upon unboxing, I immediately noticed the clean lines and apparent simplicity of the design. It felt lightweight yet solid, a good sign.

Compared to a traditional two-piece base and ring setup from Leupold and a cantilever mount from Warne, the DNZ Products offering stood out due to its simplicity and single-piece construction. I chose it because I was chasing increased rigidity and potentially improved accuracy. My initial excitement was tempered with a bit of skepticism, as simple designs don’t always equate to superior performance.

Real-World Testing: Putting DNZ Products BLR Short Action One Inch Scope Tube Mount to the Test

First Use Experience

I tested the DNZ Products BLR Short Action One Inch Scope Tube Mount on my Browning BLR .308 at my local shooting range. The conditions were typical for a late fall afternoon – overcast, with a slight drizzle. The installation was surprisingly straightforward, taking about fifteen minutes.

The mount held the scope securely through several magazines worth of .308 rounds, exhibiting no noticeable shift in zero. I found the eye relief to be ideal for my setup, and the low-profile design kept the scope close to the bore, which is generally preferred for accuracy. After only an hour on the range I knew I needed more time in the field to really trust this thing.

Extended Use & Reliability

After several months of use, including two deer hunts and numerous range sessions, the DNZ Products BLR Short Action One Inch Scope Tube Mount has proven its worth. There are no visible signs of wear or tear on the mount itself, and the finish remains intact. I’ve cleaned the rifle multiple times, and the mount requires no special maintenance beyond a simple wipe-down.

Compared to my previous experiences with separate base and ring systems, the DNZ Products mount has significantly improved the rifle’s overall handling and consistency. My previous mounting system was constantly coming loose and required frequent adjustments and re-tightening which was not only annoying, but cost me valuable time at the range, and in the field. The DNZ Products BLR Short Action One Inch Scope Tube Mount is set-it-and-forget-it, so I can spend more time shooting and less time tinkering.

Breaking Down the Features of DNZ Products BLR Short Action One Inch Scope Tube Mount

Specifications

The DNZ Products BLR Short Action One Inch Scope Tube Mount is constructed from 6061-T6 Aluminum, offering a blend of strength and lightweight properties. It is specifically designed for Browning BLR Short Action rifles and accepts scopes with a one-inch tube diameter. The mount comes in three height options: Low (.94″), Medium (1.06″), and High (1.19″), to accommodate various objective lens sizes.

The mount features a matte black finish to reduce glare and blend seamlessly with most scopes and rifles. It utilizes 6-48 x 1/4″ base screws and 6-40 x 5/8″ ring screws, both requiring a 7/64 Allen wrench. The outside-to-outside ring dimension is 4.29″, with rings that are .63″ wide.

The bore to receiver height is dictated by which model you choose: Low .94″, medium 1.06″, and high 1.19″. These specifications are crucial because they directly affect the mount’s compatibility with different scopes and the user’s ability to achieve proper eye relief and cheek weld.

Performance & Functionality

The DNZ Products BLR Short Action One Inch Scope Tube Mount performs its primary function exceptionally well, which is to securely hold a scope. It provides a stable and rigid platform, resulting in improved accuracy and consistent zero retention. The absence of moving parts and multiple connection points minimizes the risk of loosening or shifting under recoil.

The only potential weakness lies in the single-piece design, as it offers less adjustability than a two-piece system. The mount more than met my expectations of reliability and simplicity. The ability to “set it and forget it” gave me peace of mind while hunting.

Design & Ergonomics

The DNZ Products BLR Short Action One Inch Scope Tube Mount has a clean, low-profile design that complements the BLR rifle. The lightweight aluminum construction doesn’t add unnecessary bulk or weight to the rifle. Installation is simple and intuitive, requiring only basic tools.

There is no learning curve associated with using this mount. Its straightforward design makes it user-friendly even for novice scope installers.

Durability & Maintenance

Made from robust 6061-T6 Aluminum, the mount is built to withstand the rigors of hunting and shooting. The matte black finish provides adequate protection against corrosion and wear. Maintenance is minimal, requiring only occasional cleaning with a damp cloth.

Assuming responsible firearm handling, the DNZ Products BLR Short Action One Inch Scope Tube Mount should last for many years. The mount shows no signs of potential failure or premature wear.

Accessories and Customization Options

The DNZ Products BLR Short Action One Inch Scope Tube Mount itself doesn’t have customization options beyond the three height choices (low, medium, high). However, it readily accepts any one-inch diameter scope that’s appropriate for a BLR rifle. It’s compatible with a wide range of scopes from brands like Leupold, Vortex, and Bushnell.

Pros and Cons of DNZ Products BLR Short Action One Inch Scope Tube Mount

Who Should Buy DNZ Products BLR Short Action One Inch Scope Tube Mount?

Perfect for hunters who want a reliable, lightweight, and accurate scope mounting system for their Browning BLR short action rifle. This is also a good option for shooters who value simplicity and ease of installation.

This product should be skipped by shooters who need a highly adjustable scope mounting system or who use scopes with tube diameters other than one inch.

A must-have accessory is a quality scope level to ensure proper scope alignment during installation.

Conclusion on DNZ Products BLR Short Action One Inch Scope Tube Mount

The DNZ Products BLR Short Action One Inch Scope Tube Mount is a well-designed and reliable solution for mounting a scope to your Browning BLR short action rifle. The one-piece design, lightweight construction, and ease of installation make it an excellent choice for hunters and shooters seeking improved accuracy and consistency. At a price of $35.37, the value proposition is excellent, especially when compared to the cost and complexity of traditional base and ring systems.

I would personally recommend this mount to anyone looking to simplify and improve their BLR scope setup. If you own a BLR and are tired of scope mounting headaches, then pull the trigger on the DNZ Products BLR Short Action One Inch Scope Tube Mount; you won’t regret it!