DNZ Products Remington 700 Long Action Review

The Road Test: DNZ Products Remington 700 Long Action

For years, my Remington 700 rifles have been dependable workhorses, but mounting optics has always been a meticulous process. I recently found myself needing a robust, reliable solution for a long-action Remington 700, specifically for a hunting rifle that sees considerable field use. The need for a mount that could handle the stresses of backcountry excursions and maintain zero under variable conditions led me to the DNZ Products Remington 700 Long Action mount. Its reputation for solid construction and single-piece design certainly piqued my interest.

The scenario was simple: a well-loved 700 long action, chambered in .30-06, needed a new optic. My previous experiences with two-piece mounts, while adequate, always left me with a nagging concern about alignment and potential flex under duress. I considered options from established brands, but the DNZ’s monolithic design offered a compelling alternative, promising enhanced rigidity. It was this promise of a more unified and sturdy platform that ultimately swayed my decision.

First impressions of the mount were solid. Machined from 6061-T6 Aluminum and finished in a non-reflective matte black, it exuded a no-nonsense, durable quality. The absence of separate rings and bases felt inherently more robust, and the clean lines suggested thoughtful engineering. My initial reaction was one of quiet satisfaction; this felt like a piece of gear built for purpose, not just aesthetics.

Real-World Testing: Putting DNZ Products Remington 700 Long Action to the Test

My testing began on the bench, meticulously mounting a Leupold VX-6 4-24x52mm scope onto my Remington 700 long action. The process, which I’ll detail later, was surprisingly straightforward, and the fit of the scope within the integrated rings felt exceptionally precise. I followed the manufacturer’s torque specifications religiously, ensuring every screw was properly seated. This initial setup phase confirmed the high ring height was appropriate, providing ample clearance for the objective bell.

Following the bench work, the mount and rifle went where they truly belong: the field. I took it on a multi-day elk hunting trip through rugged terrain, encountering everything from dusty trails to light rain. The mount endured significant jostling in a rifle scabbard and repeated use during stalking and firing. Despite the varied conditions, the zero held perfectly, a testament to the mount’s stability.

First Use Experience

The first time I physically handled the DNZ Products Remington 700 Long Action was when I unboxed it. The weight felt substantial yet not overly burdensome, and the machined aluminum felt cool and smooth to the touch. Installation onto the Remington 700 action was, for the most part, a direct and intuitive process. The supplied instructions, while basic, clearly outlined the necessary steps for proper fitment.

My primary concern with any scope mount is alignment and how it interfaces with the rifle’s action. This DNZ mount, being a 0 MOA cant offering, sits flush with the flat top of the Remington 700 receiver. The machining was precise, and the base mated perfectly to the factory action screws. It felt as though it was designed as an integrated part of the rifle, rather than an add-on.

Extended Use & Reliability

After several months of use, including multiple range sessions and a demanding hunting season, the DNZ Products Remington 700 Long Action has proven itself to be exceptionally reliable. The mount has maintained its zero through countless rounds fired and the rigors of being transported in various vehicles and backpacks. There are absolutely no visible signs of wear, such as cracks, excessive scuffing, or any compromise in the matte black finish.

Maintenance has been virtually non-existent. A simple wipe-down with a soft cloth is all that’s needed to keep it clean. I haven’t experienced any loosening of screws or any degradation in performance. Comparing it to past experiences with two-piece mounts, this DNZ unit offers a clear step up in terms of long-term reliability and peace of mind.

Breaking Down the Features of DNZ Products Remington 700 Long Action

Specifications

The DNZ Products Remington 700 Long Action mount is crafted from 6061-T6 Aluminum, a common yet excellent choice for its strength-to-weight ratio and corrosion resistance. This particular model is designed for the Remington Model 700 rifle with a long action configuration. It features a high ring height, which is crucial for accommodating larger objective lens scopes and ensuring clearance from the barrel. The 34 mm tube diameter capacity means it’s built for larger, more robust rifle scopes often favored for long-range shooting or low-light conditions.

This mount comes with a 0 MOA cant, meaning it provides a flat mounting surface without any inherent angle. This is essential for shooters who prefer to dial their adjustments rather than rely on the scope’s internal elevation turret for longer distances, or for those using scopes with a wide range of adjustment. The black matte finish offers a non-reflective surface, ideal for hunting and tactical applications where glare can be a detriment. Finally, this is a right-hand configuration mount, designed to work with right-handed bolt actions.

Performance & Functionality

In terms of its primary function – securely holding a rifle scope in alignment – the DNZ Products Remington 700 Long Action performs admirably. The monolithic design, where the base and rings are a single, integrated unit, dramatically reduces potential points of failure or misalignment that can occur with two-piece systems. This results in a rock-solid platform that holds zero exceptionally well, even under recoil and stress.

Its main strength lies in this inherent rigidity. I experienced no perceptible flex or shifting, even when torquing down the scope mounting screws. The high ring configuration effectively clears larger objective lenses, preventing contact with the barrel, which is a common issue with lower mounts. The primary drawback, if one can call it that, is the fixed 0 MOA cant. While excellent for those who prefer to dial, it offers no built-in elevation for situations where a shooter might want to maximize their scope’s available elevation without relying solely on turrets for extreme distances.

Design & Ergonomics

The design of this DNZ mount is decidedly functional and utilitarian. Machined from a solid block of 6061-T6 Aluminum, the feel is robust and substantial. The matte black finish is applied evenly and provides excellent glare reduction, which is a significant advantage in bright field conditions or during tactical engagements. The single-piece construction eliminates the need to precisely align separate bases, simplifying the mounting process and ensuring a consistently straight platform for the scope.

Ergonomically, the high ring height is a key consideration. For my particular setup with a larger scope, it provided a comfortable and natural eye position. The integrated ring design also means there are no sharp edges or protruding components that could snag on gear. The smooth, continuous surface of the mount feels secure when handling the rifle and makes cleaning straightforward.

Durability & Maintenance

From a durability perspective, this mount is built to last. The 6061-T6 Aluminum is a high-quality material known for its resilience. I anticipate this mount will withstand heavy use and exposure to the elements for many years without degradation. Its single-piece construction inherently makes it more durable than multi-piece systems that rely on screws and pins to hold components together.

Maintenance is exceptionally simple. Beyond the occasional wipe-down to remove dust or debris, there is very little to do. The matte finish is forgiving and doesn’t easily show minor abrasions. There are no complex moving parts or delicate mechanisms to worry about. Potential failure points are minimal, primarily limited to the integrity of the action screws that secure the mount to the rifle.

Accessories and Customization Options

The DNZ Products Remington 700 Long Action mount itself is the core component, and it doesn’t come with a wide array of accessories. The primary “accessory” is the mount itself, designed to work with Remington 700 actions. Customization options are mainly related to the optic you choose to mount within its 34 mm rings. Some users might consider aftermarket scope levers or protective caps for the rings, but these are not strictly necessary for the mount’s function.

The mount is designed to accept standard scope rings and mounting hardware for its tube diameter. It’s compatible with most quality rifle scopes featuring a 34 mm main tube. However, it’s important to note that the ring height is fixed at high, so shooters needing a lower profile will need to look at different DNZ models or other manufacturers.

Pros and Cons of DNZ Products Remington 700 Long Action

Who Should Buy DNZ Products Remington 700 Long Action?

This mount is an excellent choice for owners of Remington 700 long action rifles who prioritize absolute reliability and a rock-solid optic platform. It is particularly well-suited for hunters and tactical shooters who demand that their gear perform flawlessly in challenging environments and who don’t want to worry about their zero shifting. If you are using a rifle scope with a 34 mm tube and appreciate the simplicity and strength of a one-piece design, this mount should be high on your list.

Individuals who require adjustable cant or specific, variable ring heights may want to look at more modular systems. Furthermore, shooters using smaller objective scopes might find the high ring height to be excessive, necessitating a different DNZ model or an alternative mount. For those mounting larger scopes that benefit from the extra clearance and maintain a consistent, flat mounting surface, this is an outstanding option.

Conclusion on DNZ Products Remington 700 Long Action

The DNZ Products Remington 700 Long Action mount is a superb piece of engineering that delivers on its promise of a robust and reliable optic platform. Its monolithic design, constructed from quality 6061-T6 Aluminum, provides exceptional strength and ensures consistent alignment, leading to unwavering zero retention. The high ring height and 0 MOA cant are well-suited for many modern rifle scopes and shooting applications, offering a clean and sturdy integration with the Remington 700 action.

Considering its performance, durability, and the peace of mind it offers in the field, the $189.95 price point is very reasonable. It represents excellent value for anyone seeking a no-nonsense, dependable solution for their Remington 700. I would wholeheartedly recommend this mount to any owner of a Remington 700 long action who values integrity and performance in their rifle setup. It’s a component that simply works, allowing you to focus on your target, not your gear.