Edgar Sherman Design Magwell Ejector For Glock, Gen 5 Review

The Good, the Bad & the Real of the Edgar Sherman Design Magwell Ejector For Glock, Gen 5

For years, I’ve been looking for ways to shave seconds off my reloads, a constant quest for efficiency in my firearms handling. My Glock Gen 5, a trusty sidearm, felt like it could benefit from a little enhancement in this critical area. Enter the Edgar Sherman Design Magwell Ejector For Glock, Gen 5. This wasn’t just another bolt-on accessory; it promised a more intuitive and forgiving reloading experience, a claim that piqued my interest immediately.

My search for a better magwell stemmed from a few too many fumbled reloads under pressure, especially when pushing the pace on the range. There have been moments where a slight misalignment of the magazine felt like an eternity, interrupting my flow. I’d considered simpler funnel-style magwells, but the ESD’s emphasis on human-centered design, particularly the additional cutouts, caught my eye as a potential game-changer.

Upon unboxing, the immediate impression was one of solid, purposeful engineering. The 6061-T6 aluminum construction felt robust without adding excessive bulk. The anodized finish offered a nice, non-slip texture, and the overall fit and finish exuded quality. It felt less like a cosmetic add-on and more like an integral part of the firearm designed with intent.

I briefly looked at some generic aluminum magwells that often lack the refined features ESD offers. However, their design seemed more focused on simply widening the funnel, rather than the integrated functionality ESD presented. The initial feeling was one of anticipation, a quiet satisfaction that this might indeed address the specific shortcomings I’d experienced.

Real-World Testing: Putting Edgar Sherman Design Magwell Ejector For Glock, Gen 5 to the Test

First Use Experience

My initial testing took place on my familiar indoor range. The environment is controlled, allowing for focused attention on the mechanics of the reload. The primary scenario involved drawing from a holster and executing a speed reload with a fresh magazine.

During these first runs, the difference was immediately noticeable. The wider, angled opening of the magwell made magazine insertion significantly more forgiving. Even with magazines slightly angled or not perfectly aligned, they guided themselves home with a satisfying click. The integrated side and front cutouts proved surprisingly useful, offering tactile reference points even when my focus was primarily on the target.

Ease of use was exceptionally high from the outset; there was virtually no learning curve. The design guides your hand and the magazine instinctively. A minor quirk was realizing the Glock 19 Gen 5 requires slight modification to the plug for a perfect fit, a detail I addressed with a quick pass of a utility knife as instructed by ESD.

Extended Use & Reliability

Weeks of consistent range sessions and dedicated practice have put the ESD magwell through its paces. It has become a seamless part of my Glock’s operation, so much so that I almost forget it’s an aftermarket addition. It has held up remarkably well, showing no signs of cracking, excessive wear, or performance degradation.

Maintenance has been refreshingly simple. A quick wipe-down with a dry cloth or a light application of gun oil keeps the aluminum finish clean and the cutouts free of debris. Unlike some bulkier plastic options, the metal construction feels inherently more durable against accidental impacts. Compared to previous experiences with less refined magwells that could snag or loosen over time, this ESD unit has proven its mettle.

Breaking Down the Features of Edgar Sherman Design Magwell Ejector For Glock, Gen 5

Specifications

The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is crafted from high-quality 6061-T6 aluminum. This material choice ensures both strength and a reasonable weight, coming in at 3.2 oz. It’s designed specifically for Glock double-stack Gen 5 pistols chambered in 9mm Luger and .40 S&W, with specific models like the Glock 17 Gen 5 and Glock 22 Gen 5 being primary targets.

The anodized finish provides a durable and attractive surface that also aids in grip. Crucially, the design features symmetrical side cutouts for easy magazine stripping, even with flush-fitting magazines or those with extensions. A third, prominent cutout on the front acts as a tactile and visual guide, especially beneficial in low-light conditions.

These specifications are significant because they translate directly into practical performance. The aluminum construction ensures longevity, while the precise machining creates a perfect fit. The thoughtful cutout placement enhances usability, making reloads faster and more consistent. For comparison, many generic magwells might be made of lesser-grade aluminum or plastic, and often lack the ergonomic features that make this ESD unit stand out.

Performance & Functionality

The primary function of this magwell—to facilitate faster and more reliable reloads—is where the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 truly shines. It dramatically increases the margin for error when inserting a magazine, effectively turning a potentially fumbled reload into a smooth operation. The combination of wide and sharp angles guides the magazine into place with remarkable precision.

Its greatest strength lies in its intelligent design that actively “courses corrects” a slightly misaligned magazine. This built-in forgiveness is invaluable, especially under stress. On the downside, the Gen 5 Glock 19 requires minor modification to the provided plug for full compatibility, which is a small hurdle for an otherwise excellent upgrade. Overall, it meets and often exceeds expectations for enhancing reloading speed and confidence.

Design & Ergonomics

The build quality is exceptional, with the 6061-T6 aluminum feeling solid and well-machined. The anodized finish is consistent and provides a pleasant, non-abrasive grip surface. The angles on the exterior of the magwell flow seamlessly with the lines of the Glock frame, creating a comfortable shelf for the shooting hand without introducing any pressure points or hot spots.

Ergonomically, this magwell is a triumph of human-centered design. The purposeful cutouts are not just aesthetic; they offer tangible benefits for magazine manipulation. The front cutout, in particular, is a thoughtful touch for low-light or tactile-focused reloads. There is no discernible learning curve; the design is intuitive from the first use.

Durability & Maintenance

Given its 6061-T6 aluminum construction and robust anodized finish, this magwell is built for durability. I anticipate it will last the lifetime of the firearm under normal to heavy use. It’s designed to withstand the rigors of competition, training, and daily carry scenarios.

Maintenance is straightforward, requiring only occasional cleaning to remove dust or carbon fouling. Unlike plastic components that can degrade or warp over time, this aluminum magwell is impervious to such issues. There are no apparent weak points or failure points that I’ve observed during my testing period.

Accessories and Customization Options

The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 comes with all the necessary hardware for mounting, including the custom plug. Currently, there isn’t a wide array of additional accessories specifically for this magwell, but it is designed to be compatible with most standard Glock magazines, including those with aftermarket extensions. However, it’s worth noting that the specific Strike Industries extended mags for Glock 17/45 were found not to fit, which is a crucial point for users of that specific accessory.

Pros and Cons of Edgar Sherman Design Magwell Ejector For Glock, Gen 5

Who Should Buy Edgar Sherman Design Magwell Ejector For Glock, Gen 5?

This magwell is an excellent choice for competitive shooters, law enforcement officers, and serious firearms enthusiasts who prioritize speed and efficiency in their reloads. It is particularly well-suited for anyone who frequently practices speed reloads or operates in scenarios where quick magazine changes are critical. If you find yourself occasionally fumbling reloads or want a more forgiving system, this accessory is a worthy investment.

Individuals looking for a purely aesthetic enhancement might find the price point high, and those who rely heavily on specific, non-standard magazine extensions should verify compatibility beforehand. For those with a standard Glock 19 Gen 5, be prepared for a minor modification. Essential complementary items would include additional magazines to practice with, ensuring they are compatible with the magwell.

Conclusion on Edgar Sherman Design Magwell Ejector For Glock, Gen 5

The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is, without question, a top-tier upgrade for Glock Gen 5 pistols. It delivers on its promise of enhanced reloading performance through intelligent, human-centered design. The robust aluminum construction, coupled with the thoughtful features like symmetrical and front cutouts, makes for a reliable and intuitive accessory.

At $105.00, the value proposition is strong, especially when considering the performance gains and the quality of materials and manufacturing. This is not a cheap gimmick; it’s a functional enhancement that can shave critical seconds off your reload times and boost your confidence. I wholeheartedly recommend this magwell to anyone looking to refine their pistol handling and achieve faster, more consistent reloads.