Getting My Hands on the Elevation Sight Mitt Bow Sight Cover
My quiver was looking a bit exposed, and frankly, my bow sight was taking a beating. After a particularly rough patch of weather during a late-season hunt – think sideways sleet and abrasive branches – I realized my existing bow sight cover was more of a suggestion than protection. I needed something robust, something that would truly seal my sight against the elements. This led me to the Elevation Sight Mitt Bow Sight Cover.
I was initially drawn to its promise of weather resistance and a fleece-lined interior, suggesting a dual approach to protection: keeping moisture out while preventing scratches. I’d been eyeing a few other brands, some offering rigid shells, others simpler fabric sleeves, but the Elevation Sight Mitt struck a balance that felt right for my needs, aiming to offer comprehensive coverage for my scope and any attached light kits without being overly bulky.
My first impression upon unboxing this optic accessory was positive. The rip-stop fabric felt sturdy and well-stitched, and the fleece lining added a welcome touch of perceived softness. It felt like a well-considered piece of gear, designed with the bowhunter’s realities in mind.
Real-World Testing: Putting Elevation Sight Mitt Bow Sight Cover to the Test
My testing grounds for this sight cover were as varied as my hunting experiences. I took it out on a crisp autumn morning elk hunt, where it endured dew and light morning mist. Later, it accompanied me on a more challenging whitetail hunt in early winter, facing a few hours of persistent, light rain and the constant brush of low-hanging branches. I also used it during practice sessions at the local range, where it shielded my sight from dust and the occasional errant pellet.
The Elevation Sight Mitt Bow Sight Cover proved remarkably easy to use from the get-go. Slipping it over my bow sight was a simple, intuitive action. The elastic drawstring closure cinched down securely, creating a snug fit that I felt confident would keep debris and moisture at bay.
During an extended early season hunt, I experienced a minor surprise. While navigating through dense undergrowth, a particularly sharp branch snagged the cover. Instead of tearing, the rip-stop fabric held firm, though it did leave a slight scuff mark. This demonstrated the material’s resilience, a welcome trait in the field.
Extended Use & Reliability
After several months of consistent use, the Elevation Sight Mitt Bow Sight Cover has held up admirably. It has become a permanent fixture on my primary hunting bow. I haven’t noticed any significant wear and tear on the fabric, no fraying at the seams, and the fleece lining remains intact, still offering that gentle buffer against potential abrasions.
Maintenance has been straightforward. After a muddy day, a quick wipe with a damp cloth was all that was needed to clean the exterior. Storage is equally simple; it folds down relatively compactly, making it easy to tuck into my pack when not in use. I’ve found it to be a significant upgrade from previous, less protective covers I’ve used, offering a tangible sense of security for my valuable bow sight.
Breaking Down the Features of Elevation Sight Mitt Bow Sight Cover
Specifications
The Elevation Sight Mitt Bow Sight Cover boasts a thoughtful set of specifications designed for practical application. Its dimensions are 9″ x 3.5″ x 4.5″, a size that comfortably accommodates most standard bow sights, including those with larger scopes or auxiliary light kits. The construction features a water-resistant rip-stop fabric exterior, providing a robust barrier against the elements and abrasion. Internally, a fleece-lined composition ensures that the delicate optics and surfaces of the sight are protected from scratches and dust.
The ambidextrous nature of its design means it can be easily applied to sights on bows set up for either right-handed or left-handed archers, a small but important detail for inclusivity. The drawstring closure is not just for show; it’s an elasticated cord that allows for a tight, secure seal, preventing the cover from flapping loose during transport or exposure to wind. Available in Red and Black, the color options provide some personalization, though the primary function remains protection.
Performance & Functionality
The primary job of the Elevation Sight Mitt Bow Sight Cover is to shield a bow sight from environmental hazards, and it performs this task commendably. Its weather-resistant rip-stop fabric effectively repelled light rain and dew during my testing, keeping the critical lens surfaces dry. The fleece-lined interior was a pleasant surprise; it provided a soft cushion that I believe would prevent any minor knocks from causing damage, a concern with harder, plastic covers.
The design excels at covering the scope, vertical bar, and even accommodating my small bow light attachment. The drawstring closure creates a snug fit, which is crucial for preventing dust ingress. While it does its main job exceptionally well, it’s important to note that this is a fabric cover, not a hard case; it won’t protect against significant impacts or crushing forces.
Design & Ergonomics
The design of the Elevation Sight Mitt Bow Sight Cover is utilitarian yet effective. The rip-stop fabric gives it a durable feel, and the stitching appears robust. The integration of the fleece-lined interior is a smart touch, adding a layer of protection that often gets overlooked in simpler sight covers.
Ergonomically, it’s designed for quick application and removal. The elastic drawstring closure is easy to manipulate, even with cold fingers or gloves on. The generous dimensions mean it slides on and off without a struggle, which is appreciated when time is of the essence in the field or during quick setup at the range.
Durability & Maintenance
From my experience, the Elevation Sight Mitt Bow Sight Cover is built for longevity in typical hunting conditions. The rip-stop fabric is inherently resistant to tears and abrasions, a critical factor when navigating brushy terrain. I’ve subjected it to minor scrapes and snags without any signs of significant damage, which bodes well for its lifespan.
Maintenance is refreshingly simple. A quick wipe-down is usually sufficient for routine cleaning. If it becomes excessively dirty, it can likely be hand-washed and air-dried without issue, though I haven’t needed to perform such a deep clean yet. There are no obvious wear points or potential failure points that jump out, making it a low-maintenance accessory.
Accessories and Customization Options
The Elevation Sight Mitt Bow Sight Cover comes as a single unit, with no additional accessories included. Its primary customization comes in the form of its available color options: Red or Black. While it doesn’t offer specific attachment points for accessories, its design is intended to complement existing bow setups. The ambidextrous design can be seen as a form of subtle customization, catering to both left and right-handed archers without any modification required.
Pros and Cons of Elevation Sight Mitt Bow Sight Cover
Pros
- Comprehensive Protection: Effectively covers the scope, vertical bar, and light kits, offering all-around defense.
- Water-Resistant Rip-Stop Fabric: Provides excellent protection against moisture and resists tears and snags from branches.
- Fleece-Lined Interior: Safeguards delicate sight lenses and surfaces from scratches.
- Secure Drawstring Closure: Creates a tight seal to keep out dust, dirt, and moisture.
- Ambidextrous Design: Easily fits on bows for both right-handed and left-handed archers.
Cons
- Not Impact-Proof: As a fabric cover, it offers limited protection against significant drops or crushing forces.
- Single Unit Purchase: No additional accessories are included, and it’s sold individually.
Who Should Buy Elevation Sight Mitt Bow Sight Cover?
This bow sight cover is ideal for any bowhunter who prioritizes protecting their sight from the elements and minor abrasions. It’s particularly well-suited for those who hunt in wet or dusty conditions, or who frequently navigate dense brush where snagging is a concern. If you’re looking for a simple, effective, and durable solution to keep your valuable bow sight clean and undamaged between hunts or during transport, this is a strong contender.
Archers who often find their sight accumulating dew, dirt, or suffering from minor scratches during travel or storage will benefit immensely. Those with larger scopes or auxiliary light kits attached will appreciate the generous dimensions. However, if you’re seeking a sight cover that can withstand heavy impacts or crushing forces, you would need to consider a more rigid, hard-case style protection.
Conclusion on Elevation Sight Mitt Bow Sight Cover
The Elevation Sight Mitt Bow Sight Cover delivers on its promise of reliable protection for your bow sight. Its blend of water-resistant rip-stop fabric and a fleece-lined interior provides a solid defense against moisture, dust, and scratches. The secure drawstring closure ensures a snug fit, keeping the elements at bay effectively.
For its price point of $19.99, the value proposition is excellent. It offers a level of protection and quality that rivals or surpasses more expensive options, especially considering its durability and thoughtful design features. I would confidently recommend this sight cover to any serious bowhunter looking for an affordable yet robust way to safeguard their optic. It’s a simple, effective piece of gear that performs its intended function exceptionally well, making it a worthwhile addition to any bow kit.