Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar Review

Is the **Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar** All Talk?

For those looking to bring a Leupold DeltaPoint Pro optic to a pistol equipped with a Bomar-style rear sight, the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar presents a compelling solution. This specialized mount, crafted by Evolution Gun Works, aims to simplify the integration of a red dot sight onto a platform traditionally designed for iron sights. It promises a more direct path to improved target acquisition, bypassing the need for extensive slide milling.

My own journey to this particular mount began with a desire to modernize a beloved, but iron-sighted, competition pistol. While I appreciated the reliability and classic feel of the iron sights, the speed and clarity offered by a red dot optic were becoming increasingly tempting. I explored a few routes, including custom slide work, but the cost and turnaround time were significant deterrents. Other manufacturers offered similar adapters, but none seemed to hit the sweet spot of price and apparent robust construction quite like this EGW offering. My initial impression upon receiving the mount was one of solid, utilitarian design; it felt substantial, a good starting point for a reliable optic platform.

First Use Experience

My initial testing of this optic mount took place on my home gunsmithing bench and then at a familiar indoor shooting range. I specifically sought out scenarios that mimicked a typical range day, focusing on repeated dry-fire practice and then live-fire engagements. The conditions were controlled, with consistent lighting and temperature, allowing me to focus on the mount’s direct performance.

The installation itself was surprisingly straightforward, though it did require a bit of careful fitting. The progressive taper design, as advertised, did seem to ease the process compared to some older dovetail systems I’ve encountered. However, ensuring a precise fit and then securing the optic required diligent attention to detail. There was a minor learning curve in how firmly to seat it without overdoing it, but it became intuitive after the first few attempts.

One small surprise was the precision required when tightening the screws that attach the optic to the mount itself. While the mount’s fit to the Bomar cut was good, the optic-mounting screws needed to be torqued just right to avoid any wobble. After a full session of rapid fire and drawing from a holster, the mount remained secure, holding the red dot zero perfectly.

Extended Use & Reliability

Over the course of several months and hundreds of rounds, the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar has proven itself to be a dependable component. My pistol sees regular use at the range, and this mount has endured consistent cycling without any loosening or shift in zero. It’s become a permanent fixture, performing its duty without complaint.

Durability is evident; the matte black hard coat anodized finish shows minimal wear, just the faintest brush marks from handling and cleaning. There are no signs of cracking or deformation, even after being subjected to the vibration of live fire and occasional accidental bumps during transport. Maintenance has been refreshingly simple; a quick wipe-down with a cleaning cloth and occasional application of a light lubricant to the screws is all that’s needed.

Compared to previous experiences with less expensive, generic dovetail adapters, this mount stands out. Those often required shims or extensive filing to achieve a stable fit, and their longevity was questionable. This EGW unit, however, feels like it was designed from the ground up for this specific application, offering a stability that inspires confidence.

Breaking Down the Features of **Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar**

Specifications

• Manufacturer: Evolution Gun Works is the maker of this robust sight mount. This ensures a certain level of quality control and specialized design.
• Red Dot Sights-Footprint: The mount is specifically designed for the Deltapoint Pro footprint. This guarantees a precise and secure interface for compatible optics.
• Included Accessories: The package comes with Screws necessary for mounting the optic. While minimal, these are crucial for the initial setup.
• Fabric/Material: Constructed from 7075 Aluminum, this mount offers a superb balance of strength and light weight. This aerospace-grade aluminum is known for its excellent durability and resistance to corrosion.
• Mount Type: The mount utilizes a Dovetail system for attachment to the firearm’s slide. This is a common and secure method for many pistol sight installations.
• Fit: This mount is specifically engineered to fit a Bomar Sight cut. This precision fit is essential for stability and proper alignment.
• Length: Measuring 1.604 in, the mount provides adequate surface area for securing the optic without excessive bulk. This length ensures a stable platform for the red dot sight.
• Width: With a width of 0.99 in, the mount integrates smoothly with most pistol slide profiles. This dimension contributes to a streamlined profile on the firearm.
• Finish: It features a Matte Black Hard Coat Anodized finish. This provides a durable, non-reflective surface that stands up to handling and environmental exposure.
• Gun Make: This mount is compatible with pistols from manufacturers such as Springfield Armory, STI International, Dan Wesson, and Colt. These brands commonly feature Bomar-style sight cuts.
• Gun Type: The mount is designed for Pistol applications. It serves as a bridge to modern optics on traditional handgun platforms.

These specifications collectively translate into a product that is both specialized and built to last. The choice of 7075 Aluminum is a significant factor, offering the rigidity needed to maintain optic zero under recoil without adding unnecessary heft to the firearm. The Matte Black Hard Coat Anodized finish is also a practical choice, as it resists glare and the wear and tear of regular use. The specific Dovetail fit for a Bomar Sight cut means this isn’t a universal adapter; it’s precision-engineered for a particular firearm configuration.

Performance & Functionality

The primary function of the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar is to provide a stable, repeatable platform for a Leupold DeltaPoint Pro (and compatible) optic on a pistol with a Bomar rear sight cut. In this regard, it performs exceptionally well. Once properly installed and torqued, the mount holds the optic with remarkable rigidity, ensuring that point of aim remains consistent shot after shot. I experienced no shift in zero even after extended firing sessions with powerful cartridges.

The main strength of this mount lies in its precise fit to the Bomar cut. This eliminates the slop that can plague more generic adapters, directly contributing to its reliability. Its weakness, if one can call it that, is its specificity; it is not a universal solution. This means that if your firearm does not have a Bomar-style cut, this mount will not work without significant modification, which is beyond its intended scope. It unequivocally meets and exceeds expectations for its intended purpose.

Design & Ergonomics

From a design perspective, the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar is a no-nonsense component. The 7075 Aluminum construction gives it a solid, robust feel without being overly heavy. The matte black hard coat anodized finish is both functional and aesthetically pleasing, blending well with most firearm finishes.

Ergonomically, the mount itself is largely hidden once the optic is installed. Its effectiveness comes from its seamless integration with the firearm’s existing sight dovetail. The edges are well-machined, avoiding any sharp points that could snag on clothing or a holster during concealed carry or competition draw. The installation process, while requiring basic tools, is manageable, and the resulting platform feels secure and stable in hand, leading to confident manipulation of the firearm.

Durability & Maintenance

In terms of durability, this mount feels built for the long haul. The 7075 Aluminum is inherently strong and resistant to deformation, which is crucial for maintaining zero under repeated recoil. The hard coat anodization adds another layer of protection against scratches and wear. I anticipate this mount will outlast many of the firearms it’s mounted on, provided it’s installed correctly and not subjected to extreme abuse.

Maintenance is as simple as it gets. A light wipe-down with a cleaning cloth after a range session is usually sufficient to keep it clean. For longer-term storage, a very light application of gun oil on the mounting screws can prevent seizing. There are no complex parts or difficult-to-clean areas. The primary concern would be ensuring the mounting screws and optic screws remain tight, which is standard for any optic installation.

Accessories and Customization Options

The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar is fairly minimalist in its accessory offerings, arriving with just the essential Screws needed to secure the optic. This is typical for this type of component, as the primary accessory it interacts with is the red dot sight itself.

However, the mount’s compatibility is a key aspect here. It’s designed to accept optics with a Deltapoint Pro footprint, and the product description also notes its compatibility with other sights like the JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, and certain Holosun models (though rear pins might need removal for the latter). This broadens its utility significantly for users who might own multiple compatible red dots. There are no direct customization options for the mount itself, as it’s a fixed component.

Pros and Cons of **Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar**

Who Should Buy **Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar**?

This mount is an excellent choice for pistol owners who have a firearm equipped with a Bomar-style rear sight dovetail and wish to install a Leupold DeltaPoint Pro or a compatible micro red dot sight. It’s particularly well-suited for competition shooters looking to gain the speed and precision of a red dot without permanently modifying their slide, or for handgun enthusiasts who want to modernize a classic firearm platform. It would be ideal for someone who values a secure, robust, and precisely fitted adapter over a universal solution.

Conversely, individuals with firearms that do not feature a Bomar cut, or those looking for a mount that can adapt to multiple different optic footprints or firearm types, should look elsewhere. Those on an extremely tight budget who are willing to compromise on fit and finish might explore more generic options, though at the potential cost of reliability. For those who do buy this mount, ensuring you have the correct size screws for your specific optic and a torque wrench or driver capable of applying precise pressure are highly recommended complementary items.

Conclusion on **Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar**

The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Bomar stands out as a high-quality, purpose-built solution for integrating a Leupold DeltaPoint Pro or similarly footprinted red dot sight onto a pistol with a Bomar rear sight cut. Its construction from 7075 Aluminum with a durable hard coat anodized finish speaks to its longevity and ability to withstand the rigors of regular use and recoil. The precise fit to the Bomar dovetail is its key selling point, offering a stability that is crucial for maintaining optic zero and ensuring reliable performance.

Considering its performance, build quality, and the specific niche it fills, the price of $51.99 represents strong value. While it necessitates a compatible optic and a specific firearm configuration, for those who fit this profile, it is a thoroughly recommendable upgrade. If you own a pistol with a Bomar sight cut and are looking to mount a DeltaPoint Pro, this mount from Evolution Gun Works is a solid, dependable choice that delivers on its promise.