Discovering the GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube: My Take
The GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube is a piece of hardware designed to add stability to an extended magazine tube on a Remington 870 shotgun. As an experienced gear specialist, I’ve seen my fair share of add-ons, and this particular clamp from GG&G promised a specific solution to a common issue: potential magazine tube flex or rattle. My own Remington 870, a reliable workhorse I’ve used for everything from home defense drills to general yard work patrol, had developed a slight, almost imperceptible, looseness in its extended magazine tube. While not a functional failure, that minor movement grated on my nerves, hinting at a lack of perfect integration. I briefly considered a simple zip-tie solution or a generic aftermarket clamp, but the specific design of the GG&G unit, intended for their own extension tubes, piqued my interest. Unboxing it, the initial impression was one of solid construction; it felt substantial without being overly heavy. My first reaction was a quiet satisfaction, a feeling that a dedicated, well-machined solution was finally in hand.
Real-World Testing: Putting GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube to the Test
First Use Experience
My testing grounds for this clamp were primarily my home workshop and the familiar confines of my personal shooting range. I mounted the GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube onto my Remington 870, which was already fitted with a factory +2 extension tube. The installation was straightforward, requiring only the provided Allen wrench and a bit of tactile feedback to know when it was properly snug. I performed initial function checks without live fire, cycling the action and manipulating the shotgun in various positions. The clamp immediately seemed to integrate well, providing a noticeable sense of rigidity to the magazine extension. There were no surprises or quirks during this initial fitting; it simply did what it was designed to do.
Extended Use & Reliability
Over several weeks, this barrel clamp became a permanent fixture on my Remington 870, seeing regular use. This included countless dry-fire drills, several range sessions with various loads (from light target rounds to stout buckshot), and simply carrying the shotgun around the house. The clamp showed absolutely no signs of loosening or slipping, even after being subjected to the recoil of heavier loads. There were no visible signs of wear and tear, no cracks, and its finish remained pristine. Maintenance was non-existent, as the unit is essentially a solid piece of metal that requires no special cleaning beyond a quick wipe-down. Compared to the flimsy factory clamp I’d previously used, which always felt a bit loose, this GG&G unit felt like a significant upgrade in terms of security and overall build quality.
Breaking Down the Features of GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube
Specifications
The GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube is crafted from a strong and lightweight material, designed for optimal support without adding undue heft to the firearm. It is held in place by counter pressure steel socket head cap screws, a detail that speaks to its secure fastening mechanism. This clamp is specifically designed to work with GG&G magazine tubes that have a relief cut, a crucial detail for ensuring proper fit and function. It’s important to note that this ensures a precise interface, preventing any unnecessary pressure points or potential damage to the extension tube or barrel. The fact that it’s manufactured in the USA adds to its perceived quality and reinforces the commitment to domestic production standards.
Performance & Functionality
The primary function of this barrel clamp is to provide additional support for extended magazine tubes, and in this regard, it performs admirably. It effectively eliminates the slight wobble or rattle that can sometimes accompany magazine extensions, particularly after significant use. The clamp integrates seamlessly with the barrel and magazine tube, creating a solid connection that enhances the overall feel and reliability of the shotgun. While it doesn’t inherently improve shooting performance in a direct way, the increased sense of solidity and the elimination of distracting noises contribute to a more confident and enjoyable shooting experience. It meets, and in some cases exceeds, expectations for a component designed to simply reinforce an existing setup.
Design & Ergonomics
The design of the GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube is commendably simple yet effective. Its strong and lightweight construction means it adds minimal bulk. The finish is typically a matte black, blending well with most shotgun aesthetics and resisting glare. In terms of ergonomics, the clamp is designed to be unobtrusive; it mounts flush against the barrel and magazine tube, minimizing snag points. This is a significant advantage, especially when maneuvering the shotgun in confined spaces or when moving in and out of vehicles. The use of counter pressure steel socket head cap screws ensures a secure grip and allows for precise tightening.
Durability & Maintenance
Given its solid construction and the quality of materials, the GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube is built for longevity. Under normal use, it’s unlikely to fail or show significant wear. Its simple design means there are no complex moving parts to break or wear out. Maintenance is virtually non-existent; a quick wipe down with a cloth is all that’s needed to keep it clean and free from dust or debris. Potential failure points are minimal, primarily limited to over-tightening the screws to the point of stripping them, which is a user error rather than a product defect. The manufacturer’s reputation for producing robust firearm accessories further instills confidence in its durability.
Accessories and Customization Options
The GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube comes with the necessary counter pressure steel socket head cap screws and an Allen wrench for installation. This is a thoughtful inclusion, as it allows for immediate installation straight out of the box. Beyond the included hardware, there are no significant customization options for the clamp itself. However, its primary purpose is to work with specific GG&G magazine tubes, suggesting a level of intended synergy rather than broad aftermarket compatibility for the clamp’s mounting interface. The flush design also means it won’t interfere with most slings or other barrel-mounted accessories, provided they are positioned appropriately.
Pros and Cons of GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube
Pros
- Provides excellent support for extended magazine tubes, eliminating rattle and wobble.
- Strong and lightweight construction adds stability without significant weight penalty.
- Flush-mounted design minimizes snag points for easier handling and storage.
- Includes necessary installation hardware and an Allen wrench, offering a complete package.
- Made in the USA, reflecting quality manufacturing standards.
- Effectively cleans up the visual profile of the shotgun’s front end.
Cons
- Specific compatibility with GG&G magazine tubes that have a relief cut may limit broader application.
- Slightly higher price point compared to generic alternatives, reflecting its specialized design and materials.
Who Should Buy GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube?
This barrel clamp is ideally suited for Remington 870 owners who have specifically installed a GG&G magazine extension tube featuring a relief cut. It is a perfect fit for shooters who value a rock-solid, rattle-free firearm and appreciate the clean, snag-free profile it offers. Those who use their shotgun for home defense, tactical applications, or even just general utility where a secure magazine extension is paramount will find this part highly beneficial. Individuals looking for a quick, reliable fix to a loose magazine tube on a compatible setup should definitely consider this product.
Those who do not own a compatible GG&G magazine extension, or who are looking for a universal fit clamp for any brand of magazine tube, should look elsewhere. Furthermore, if budget is an absolute top priority and a minor rattle is not a concern, a less specialized clamp might suffice. For users who frequently run slings attached to the magazine cap, ensuring the clamp’s placement doesn’t interfere with the sling swivel is also something to consider, though its low profile generally avoids this issue.
Conclusion on GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube
The GG&G Barrel Clamp for GG&G Remington 870 Magazine ExtensionTube is a well-executed accessory that delivers precisely what it promises: enhanced stability and a cleaner look for compatible Remington 870 setups. Its strong and lightweight build, coupled with the secure counter pressure steel socket head cap screws, ensures a reliable hold that stands up to recoil and active use. While its specific compatibility requirements mean it’s not a universal solution, for those who fall within its intended application, it’s an excellent upgrade. The price point of $43.99 is justifiable for the quality of materials, manufacturing, and the peace of mind it provides. I would readily recommend this clamp to any owner of a compatible GG&G magazine extension tube who seeks to eliminate any looseness and achieve a more integrated, solid firearm. It’s a small part that makes a noticeable difference.