Grit & Gear: Testing the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock**
For anyone serious about maximizing accuracy and stability in long-range shooting, the H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock represents a significant upgrade over factory offerings. As an experienced gear specialist with over a decade of putting equipment through its paces in diverse environments, I’ve learned that marginal gains in precision can make all the difference. My own Remington 700 SPS Varmint .223, a rifle I trust for its inherent accuracy, was crying out for a more robust and adaptable platform. The factory synthetic stock, while functional, lacked the structural integrity and ergonomic refinements necessary for consistent, precision shooting, especially when paired with a heavier aftermarket barrel.
The decision to switch to an H-S Precision stock wasn’t made lightly. I considered other high-end synthetic options and even some traditional wood stocks, but H-S Precision’s reputation for robust construction and full-length bedding blocks kept drawing me back. My initial impression upon unboxing the PSL135 was one of solid, no-nonsense engineering. The materials felt dense and substantial, and the overall design spoke of purpose-built functionality. It offered a tangible sense of relief and anticipation, knowing I was about to integrate a component designed from the ground up for enhanced shooting performance.
Real-World Testing: Putting the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock** to the Test
First Use Experience
My primary testing grounds for this rifle stock were the familiar shooting benches and prone positions at my local outdoor range. I installed the H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock on my Remington 700 SPS Varmint, a rifle already configured with a #6 contour barrel, making it an ideal candidate for this specific stock. The initial fitting required minor adjustments with a Dremel tool in a few areas, a common occurrence when mating aftermarket components. However, once properly bedded, the difference in stability was immediately apparent.
The stock felt incredibly solid, absorbing recoil with a satisfying muted thud rather than the sharp shock often transmitted through less substantial stocks. Even after a full afternoon of shooting, including several rapid-fire strings to test heat dissipation, the stock remained comfortable and supportive. I experienced no surprises or quirks during this initial phase, only a confirmation that the engineering behind this product was sound and aimed at practical performance.
Extended Use & Reliability
Over several months, this H-S Precision stock has become a permanent fixture on my rifle, seeing regular use during range days and informal target practice sessions. It has held up exceptionally well to the rigors of repeated handling, transport in a hard case, and exposure to varying outdoor conditions, from dry heat to light morning dew. There are no visible signs of wear, such as cracks or significant scuffing, and the structural integrity remains as robust as the day I installed it.
Maintenance has been straightforward; a quick wipe-down with a damp cloth and occasional light application of a protectant is all that’s needed to keep it looking and performing its best. Compared to the factory stock it replaced, the durability and consistent performance are night and day. Budget synthetic stocks can often flex or warp under stress, but this H-S Precision unit maintains its rigidity, which translates directly to more consistent shot placement.
Breaking Down the Features of the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock**
Specifications
The H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock is built for serious precision shooting. It features a full-length aluminum bedding block, which is crucial for providing a rigid and stable platform for the barreled action. This significantly enhances accuracy by eliminating flex and ensuring consistent lock-up.
The stock is specifically designed for aftermarket barrels with a heavy sporter/light varmint contour, accommodating a muzzle diameter of up to .750 inches at 24 inches. This precise barrel channel ensures a free-floating barrel, further contributing to accuracy by preventing any contact that could induce flyers. The vertical grip is shaped to promote a consistent hand position, measuring 1.59 inches at its widest point.
An elevated cheek weld is integral to the design, allowing for a comfortable and repeatable sight picture, especially when using magnified optics. The stock’s overall length is 32.2 inches, offering ample support for prone and bench shooting positions. For versatility, it includes dual sling swivel studs, with one at the rear and two at the front, spaced 2 inches apart. This allows for the secure attachment of a bipod while still accommodating a rifle sling. The average weight of this stock is approximately 2 lbs. 11 oz., adding a substantial feel without being excessively heavy.
Performance & Functionality
The primary job of any rifle stock is to provide a stable and consistent platform for the action and barrel, and the PSL135 excels at this. Its full-length aluminum bedding block ensures that the Remington 700 action is perfectly supported, leading to noticeably improved shot consistency. The wide barrel channel is perfectly sculpted for the intended barrel contours, allowing for proper free-floating which is paramount for long-range accuracy.
A key strength is its inherent rigidity; even under heavy firing schedules or when subjected to lateral pressure, the stock maintains its form. The vertical grip promotes a more consistent shooting posture, reducing shooter-induced errors. The only minor drawback encountered was the necessity for slight Dremel work during installation, indicating that while tolerances are tight, minor fitting might be required for absolute perfection.
Design & Ergonomics
The design of the H-S Precision Pro-Series PSL135 is driven by function. The synthetic construction is robust and offers a non-slip texture that provides excellent purchase, even with gloved hands. The fixed comb is shaped to provide an ideal cheek weld for most shooters using typical scope heights.
The vertical grip is comfortable and promotes a proper trigger finger placement, reducing wrist fatigue during extended shooting sessions. While the comb is fixed, its sculpted profile and the overall rake of the grip feel natural and supportive. The forend is wide enough to provide a stable base for bags or rests, enhancing stability on the bench or in prone.
Durability & Maintenance
H-S Precision stocks are renowned for their durability, and the PSL135 is no exception. Constructed from high-density synthetic materials reinforced with the aluminum bedding block, it is built to withstand significant abuse and environmental exposure. I anticipate this stock will last for decades with minimal care, far outperforming standard injection-molded polymer stocks.
Cleaning is as simple as wiping it down; the material resists dirt and grime effectively. There are no complex mechanisms or delicate parts to worry about. Its robust construction suggests that potential failure points are minimal, making it a reliable choice for serious shooters.
Accessories and Customization Options
The PSL135 comes equipped with dual sling swivel studs at the front and a single stud at the rear. This configuration is ideal for attaching a bipod to the front while leaving a rear stud available for a traditional sling. The stock is also designed to accommodate the Remington BDL floor plate or H-S Precision’s own detachable magazine systems, offering flexibility in magazine configuration.
While this stock doesn’t feature extensive user-replaceable parts in the way some chassis systems do, its strength lies in its integrated design. The primary customization comes from the rifle action and barrel fitted within it. Compatibility with standard bipods and sling swivels is excellent, ensuring easy integration with common shooting accessories.
Pros and Cons of the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock**
Pros
- Full-length aluminum bedding block provides exceptional rigidity and accuracy.
- Specifically designed for heavy sporter/light varmint barrel contours with a .750″ muzzle diameter.
- Vertical grip and elevated cheek weld enhance shooter comfort and consistency.
- Dual front sling swivel studs allow for secure bipod mounting while retaining sling attachment points.
- Durable synthetic construction built to withstand rigorous use and environmental conditions.
Cons
- Minor fitting adjustments may be required for optimal installation on some Remington 700 actions.
- Fixed comb may not suit every shooter’s individual preference for cheek weld height without optic adjustments.
- Price point is higher than basic factory synthetic stocks.
Who Should Buy the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock**?
This stock is an excellent choice for serious long-range shooters and competitive marksmen who own a Remington 700 BDL short-action rifle and are looking to maximize its accuracy potential. It’s ideal for those who have upgraded to a heavier barrel contour and require a stable, free-floating platform. Anyone engaged in precision shooting disciplines such as F-class, PRS, or benchrest, where every fraction of an inch counts, will benefit significantly.
Those who should probably skip this particular stock are individuals looking for a simple drop-in replacement for a factory sporter barrel or those who prefer traditional wood stocks for aesthetic reasons. If you require an adjustable comb for fine-tuning your sight picture, this fixed-comb model might not be the ideal fit unless your optic setup already accounts for it. For optimal performance, pairing this stock with a high-quality scope and a robust bipod is highly recommended.
Conclusion on the **H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock**
The H-S Precision Pro-Series PSL135 Remington 700 BDL Short-Action Right-Hand Rifle Stock is a precision instrument designed to elevate the performance of the venerable Remington 700 platform. Its full-length aluminum bedding block and meticulously crafted barrel channel deliver the stability and accuracy necessary for demanding long-range shooting. While it may require minor fitting and represents a significant investment over a factory stock, the gains in accuracy, consistency, and overall shooting experience are undeniable.
The value proposition here lies in the substantial improvement in rifle performance for its price, especially when compared to the cost of custom barrel work or other major accuracy enhancements. I wholeheartedly recommend this stock to any Remington 700 owner seeking to unlock their rifle’s full potential for precision shooting. If you’re committed to accuracy and want a rock-solid foundation for your rifle, this H-S Precision stock is a superb investment.