JARD Remington 700 Bedding Pillars Review

The JARD Remington 700 Bedding Pillars: First Use to Final Thoughts

As someone who has spent over a decade wrestling with tools, gear, and equipment in environments ranging from dusty workshops to precise laboratory benches and the unpredictable outdoors, I’ve learned to appreciate the subtle but crucial components that hold everything together. It was during a routine stock bedding project on a beloved Remington 700 rifle that I encountered a common, yet often overlooked, issue. The original stock bolts, when tightened with too much enthusiasm or uneven pressure, would compress the stock material, particularly in older synthetic or wooden stocks. This compression inevitably leads to uneven pressure points along the barrel’s contour, a surefire way to degrade a rifle’s accuracy. Seeking a more consistent and reliable method to prevent this, I turned my attention to the JARD Remington 700 Bedding Pillars.

My search for a solution led me to these specifically designed pillars from JARD. I considered some generic brass tubing and even considered machining my own, but the appeal of a purpose-built part, engineered for this specific application, was strong. The initial impression upon opening the small, clear plastic packaging was one of simple, functional solidity. These aren’t flashy components, but their machined surfaces and precise dimensions immediately conveyed a sense of quality craftsmanship. There was an immediate sense of relief, knowing that a straightforward solution to a frustrating problem was finally in hand.

Real-World Testing: Putting JARD Remington 700 Bedding Pillars to the Test

My testing ground for these bedding pillars was unequivocally the workbench and the shooting range, the natural habitats for any rifle component. The primary scenario involved a complete stock bedding job on a classic Remington 700 SPS, a rifle known for its accuracy potential but also its susceptibility to stock-induced issues. I also used them in a quick bedding touch-up on a slightly older synthetic stock that had begun to show signs of compression. The pillars were installed during the epoxy bedding process, where their role is to act as precise spacers, preventing the stock screws from being over-tightened.

During the bedding process, the pillars performed as expected, offering a consistent, unyielding surface for the screws to bear against. I deliberately applied significant torque to the screws (within reason, of course) to simulate the potential for overtightening. The pillars held firm, ensuring the epoxy remained undisturbed and that the final compression was uniform. I also subjected them to a few cycles of tightening and loosening to ensure no binding or deformation occurred.

First Use Experience

The installation of the JARD Remington 700 Bedding Pillars was integrated directly into the rifle stock bedding process. This isn’t a standalone component you simply screw in; it’s part of a more involved procedure. My setup involved a clean, well-lit workbench with all the necessary tools for bedding, including bedding epoxy, release agents, and the action itself. The pillars were placed into their respective cutouts within the stock, one at the front action screw inlet and another at the rear.

The experience was straightforward and intuitive, assuming one is familiar with the basics of rifle stock bedding. There was no steep learning curve; the pillars simply occupy the space that would otherwise be compressed by the action screws. The most significant aspect of the first use was the confidence they instilled, knowing that a common pitfall of overtightening was now effectively eliminated by their presence.

Extended Use & Reliability

After the initial bedding project, the rifle has seen numerous range trips, enduring recoil, temperature fluctuations, and the general handling that comes with regular use. The pillars have remained perfectly in place, showing no signs of movement or degradation. There has been no indication of wear, such as scratching, marring, or any loss of their inherent structural integrity.

The maintenance required for these pillars is virtually nonexistent, assuming they were properly bedded initially. They are protected within the stock and epoxy, shielded from dust, moisture, and physical impact. Cleaning the rifle involves no special treatment for the pillars; they are simply part of the overall bedding system. Compared to my previous experiences with custom-turned aluminum or even simple brass tubing used as spacers, these JARD units offer a more refined and consistent solution. They lack the potential for galling or the slight flexibility that can sometimes be an issue with less precisely manufactured alternatives.

Breaking Down the Features of JARD Remington 700 Bedding Pillars

Specifications

The JARD Remington 700 Bedding Pillars are precision-machined components designed to fit the Remington Model 700 action. They come in a set, typically with two pillars: one for the front action screw inlet and one for the rear. The front pillar measures 0.885″ in length, with a 0.255″ screw hole diameter and an 0.49″ outside diameter. The rear pillar is slightly longer, measuring 1.285″ in length, with the same 0.255″ screw hole diameter and 0.49″ outside diameter.

These specifications are crucial. The precise lengths ensure that when the stock screws are tightened, they bottom out against the pillars rather than crushing the stock material. The screw hole diameter is designed to accommodate the standard Remington 700 action screws, and the outside diameter provides ample surface area for the bedding epoxy to bond with, creating a stable foundation. This measured approach eliminates the guesswork often associated with DIY solutions and guarantees a consistent bedding job.

Performance & Functionality

In their primary function – preventing stock compression – these pillars perform exceptionally well. When properly installed as part of a bedding process, they ensure that the action screws achieve a uniform torque without damaging the stock. This directly translates to improved rifle accuracy by eliminating uneven pressure points that can affect barrel harmonics. The pillars themselves are inert and do not introduce any new variables into the rifle’s system, simply acting as a stabilizing interface.

The key strength of these units lies in their simplicity and effectiveness. They do exactly what they are designed to do, and they do it without fuss. The primary function is the elimination of overtightening, which is crucial for consistent shot placement. There are no real weaknesses in their performance, assuming correct installation. They are essentially passive components that contribute significantly to the stability of the rifle’s bedding.

Design & Ergonomics

The design of the JARD Remington 700 Bedding Pillars is dictated by function. They are cylindrical with precisely machined ends and through-holes. The material, likely aluminum or a similar metal alloy, provides a durable and non-corrosive surface. They feel solid and substantial in hand, with smooth, chamfered edges that prevent them from damaging the stock during installation or removal.

The silver finish is understated, as these components are typically hidden within the stock. Ergonomically, they are not “handled” in the traditional sense during use; their design is focused on fitting into pre-existing recesses within the rifle stock. The machined precision ensures they sit flush and stable, which is critical for the success of a bedding job.

Durability & Maintenance

These bedding pillars are engineered for longevity. Made from metal and protected within the stock bedding, they are built to last the lifetime of the rifle. Under normal use, which involves being part of a properly bedded stock and experiencing only the forces from action screws, they are virtually indestructible.

Maintenance is minimal to non-existent. Once bedded, they require no attention. If a rifle is ever re-bedded, the pillars can be reused without issue, provided they were not damaged during the initial removal. There are no obvious failure points; they are simple, solid metal tubes.

Accessories and Customization Options

The JARD Remington 700 Bedding Pillars are sold as a set, and typically do not come with additional accessories. They are designed to work with the existing action screws of the Remington Model 700. Their purpose is to integrate with the bedding compound and the rifle’s stock, rather than to be part of a modular system with extensive customization options.

However, their inherent design means they are compatible with any standard Remington 700 action screws and common bedding epoxies like those from Brownells or Devcon. The primary “customization” would involve the choice of bedding epoxy and the technique used to bed the stock, rather than modifications to the pillars themselves.

Pros and Cons of JARD Remington 700 Bedding Pillars

Who Should Buy JARD Remington 700 Bedding Pillars?

These bedding pillars are an excellent choice for any Remington 700 owner who is undertaking a stock bedding project or wants to improve the consistency of an existing bedding job. They are particularly beneficial for those using wooden stocks or older synthetic stocks where material compression is a significant concern. Anyone looking to squeeze the utmost accuracy out of their Remington 700 will find these a valuable addition to their toolkit.

Individuals who are not comfortable with rifle disassembly, bedding procedures, or epoxy work should probably skip this product, as it requires a specific skill set for proper installation. Those seeking a quick, bolt-on modification should look elsewhere. A must-have accessory to use these effectively would be a quality bedding epoxy kit and the appropriate release agents and tools for stock bedding.

Conclusion on JARD Remington 700 Bedding Pillars

The JARD Remington 700 Bedding Pillars are a testament to how well-designed, purpose-built components can solve common, vexing problems in firearm customization. They perform their intended function flawlessly, offering a tangible improvement in the consistency of a rifle’s bedding and, consequently, its accuracy. For their price point of $29.99, they represent exceptional value, providing a professional-grade solution that far exceeds the effectiveness of DIY alternatives.

I would wholeheartedly recommend these pillars to any serious Remington 700 enthusiast undertaking a bedding project. They are a small investment that yields significant returns in terms of rifle performance and peace of mind, ensuring that a crucial aspect of your rifle’s accuracy remains stable and predictable. If you’re serious about your Remington 700’s accuracy, these pillars are a component you should strongly consider.