Lee Automatic Processing Press Review

What Makes the Lee Automatic Processing Press Click?

As someone who’s spent over a decade wrestling with gear in every conceivable environment – from gritty workshops to pristine labs and demanding field sites – I’m always on the lookout for tools that genuinely streamline a process. The Lee Automatic Processing Press caught my eye because it promised a significant leap in efficiency for case preparation and bullet sizing, tasks that can often become tedious bottlenecks. This device isn’t just another single-stage press; it’s engineered with automation in mind, a concept I’d rarely seen applied so effectively to a compact, single-station unit.

My initial motivation for looking at this press stemmed from a growing backlog of spent brass and a desire to accelerate my reloading workflow without investing in a much larger, more complex progressive press. The promise of depriming, swaging, or sizing cast bullets as fast as I could work the lever was incredibly appealing. The press itself, even before I touched it, felt solid. Its construction, a mix of steel and aluminum, exuded a no-nonsense durability that suggests it’s built to handle the repetitive motions it’s designed for.

While I considered a few other single-stage presses, their manual nature and slower operation felt like a step backward from what this Lee offering presented. The core innovation – the flexible die mounting and the integrated automation – really set it apart. My first impression was one of practical utility; it looked like a tool designed by someone who understood the pain points of reloading and set out to solve them directly.


Real-World Testing: Putting Lee Automatic Processing Press to the Test

First Use Experience

I set up the Lee Automatic Processing Press on my primary reloading bench, a space familiar with dust, occasional oil spills, and the constant hum of activity. My initial tests focused on its advertised core functions: depriming spent rifle cases and then sizing a batch of cast pistol bullets. The setup was straightforward; mounting standard 7/8-14 dies and a shell holder was as expected for a reloading press.

The real revelation came with the first cycle. The automation package included, particularly the case and bullet feeder, is genuinely impressive. As I worked the lever, the jaws of the feeder automatically grasped and presented each piece, then released it precisely into the die’s operating position. Cycling the press empty, just to watch the jaws open and close with their rapid, synchronized motion, was fascinating in itself.

I encountered a minor surprise with the X-press shell holder design; it allows the case to pass through, which is crucial for the automation, but requires a slight adjustment in thinking from traditional shell holders. Initially, there was a slight learning curve in ensuring consistent placement of the cases and bullets into the feeder jaws, but after a dozen cycles, it became second nature. The frameless design offered excellent visibility, and the power grip on the lever was comfortable and symmetrical, allowing for easy operation with either hand.

Extended Use & Reliability

After weeks of processing hundreds of cases and sizing multiple batches of cast bullets, the Lee Automatic Processing Press has proven to be a workhorse. Its ability to rapidly deprime .223 brass or size .45 ACP bullets, achieving what feels like true automation on a single-station platform, has significantly sped up my preparatory work. I’ve deliberately exposed it to the usual workshop grime, and the 100% primer capture system, a simple screw-top bottle, has worked flawlessly, keeping my bench clean.

Durability has been solid. The steel linkages and aluminum carriers show no signs of undue stress or wear, even with consistent, rapid operation. The counter-balanced spring ensures the handle never falls unexpectedly, a thoughtful touch that enhances safety. Compared to other single-stage presses I’ve used, this one offers a speed that borders on semi-automatic, without sacrificing the control inherent in manual reloading.

Maintenance is minimal. A quick wipe-down with a dry cloth after a long session is usually sufficient. The roller burnished columns for the upper carrier seem to require no lubrication and remain smooth. My only watch-out would be to ensure the primer catch bottle is emptied regularly to prevent overflow, but that’s a minor point in an otherwise robust and reliable system.

Breaking Down the Features of Lee Automatic Processing Press

Specifications

The Lee Automatic Processing Press is engineered for efficiency, boasting a compact yet robust construction. Its weight of 3.6 lb belies its sturdy build, primarily from steel and aluminum. The press offers a generous three-plus inches of stroke, which is ample for processing even larger belted magnum cartridges. A key design element is its ability to mount dies to either the top or bottom of the press, a feature that unlocks its automated potential.

This flexibility is crucial because the automation package includes revolutionary case and bullet feeders. These feeders feature jaws that automatically grasp and position components, then instantly release them. This mechanism, combined with the X-press shell holder (which allows cases to pass through), dramatically increases cycling speed. The press accepts standard 7/8-14 dies from any manufacturer, utilizing Breech Lock bushings for quick changes, and works with most standard press shell holders. It includes three popular X-press shell holders (2, 4, and 19) suitable for over 60 cartridges. The unit also comes complete with all necessary feed tubes, supports, risers, and the 22-caliber bullet feed jaws.

Performance & Functionality

The core job of the Lee Automatic Processing Press is to make case preparation and bullet sizing faster, and it absolutely delivers on this promise. The automated feeding system is the star here; once set up, it’s astonishingly quick. Depriming cases can be done with remarkable speed, often limited only by how fast you can physically cycle the lever. Sizing cast bullets is equally efficient, with the jaws reliably presenting each bullet for processing.

The automation package truly sets this press apart from any other single-stage press I’ve encountered. It transforms repetitive tasks into a smooth, rapid rhythm. The primer capture system is another functional win, keeping lead dust and spent primers neatly contained. While it excels at depriming, sizing, and swaging, it functions perfectly well as a general-purpose single-stage reloading press, offering excellent visibility and hand clearance due to its frameless design.

Its primary strength is its speed and automation, making it far quicker than conventional single-stage presses for specific tasks. The main weakness, if one can call it that, is that its automation is tailored to specific processes. For highly complex reloading steps requiring manual adjustment at each stage, a progressive press might be preferred, but for batch processing of components, this press is exceptional.

Design & Ergonomics

The Lee Automatic Processing Press feels like a tool conceived with practical application at its forefront. Its construction mixes steel for the primary lever and linkages with aluminum for the die carriers, offering a good balance of strength and weight. The molded “power grip” on the lever is surprisingly comfortable and entirely symmetrical, making operation easy for either hand without any awkwardness.

The frameless design is a significant ergonomic advantage. It provides nearly unlimited visibility of the die area and ample hand clearance, which is a welcome change from some presses that can feel cramped. Mounting is simple, with no under-swing required, making it adaptable to various bench setups. The low-stress components made of nylon or acetal copolymer further contribute to its smooth operation.

The inclusion of Breech Lock bushings is a thoughtful design choice, allowing for rapid die changes if needed, though the press’s automation often means you’ll be sticking with one die for extended periods. The roller burnished columns on which the upper carrier rides ensure a smooth, stable action. The centrally mounted coil spring counter-balances the lever, preventing it from dropping unexpectedly, a simple but effective safety feature.

Durability & Maintenance

Based on my experience, the Lee Automatic Processing Press is built for longevity, especially for its intended purpose of high-volume component processing. The combination of steel linkages and machined aluminum carriers suggests it can withstand considerable use without developing play or stress fractures. The low-stress internal components are made from durable polymers, which are less prone to corrosion or seizing than metal alternatives.

Maintenance is blessedly simple. The most crucial aspect is managing the primer waste. The screw-top bottle primer capture is effective, but it does need to be emptied periodically to prevent jamming. Other than that, a light dusting and an occasional wipe-down are all that’s required. I haven’t observed any signs of significant wear, even after processing several hundred cases and bullets. The power grip material has shown no degradation, and the linkages remain free of binding.

The design inherently minimizes points of failure. The frameless structure means less stress is distributed through the frame itself, directing force more directly to the dies. The automated feeder mechanism, while complex in its function, appears robustly built with simple, effective jaw action. I foresee this press holding up well for any reloader who uses it for its intended purpose of rapid component preparation.

Accessories and Customization Options

The Lee Automatic Processing Press comes with an impressive array of included accessories, particularly the automation package. This includes the revolutionary case and bullet feeder, the X-press shell holder adaptor, and the 22-caliber bullet feed jaws. It also ships with the necessary feed tubes, tube supports, and risers to make the feeding system functional right out of the box. The inclusion of three popular X-press shell holders (2, 4, and 19) significantly expands its cartridge compatibility from the start.

Furthermore, the press is designed to accept standard 7/8-14 dies from any manufacturer thanks to the Breech Lock bushings integrated into the top and base carriers. It also accepts standard shell holders from most manufacturers. While the press itself is highly automated for specific tasks, the reliance on standard dies and shell holders means you can easily integrate it into an existing reloading setup or customize it with specialized dies as needed. The included Spline drive breech lock bushing allows for quick die changes, though the automation aspect makes it less critical for continuous runs of a single operation.

Pros and Cons of Lee Automatic Processing Press

Pros

  • Revolutionary Automation Package: The integrated case and bullet feeders drastically increase processing speed.
  • Exceptional Speed for Specific Tasks: Depriming, sizing, and swaging can be done at an unprecedented rate for a single-stage press.
  • Excellent Primer Capture: The screw-top bottle system effectively contains spent primers and dust.
  • Robust Construction: Uses steel and aluminum for durability and stability.
  • Great Visibility and Hand Clearance: The frameless design makes operation comfortable and easy.
  • Versatile Die and Shell Holder Compatibility: Accepts standard 7/8-14 dies and most standard shell holders.
  • Comfortable Ergonomics: Symmetrical power grip and smooth operation reduce user fatigue.
  • Compact Footprint: Easy to mount on any bench without extensive under-swing.
  • Excellent Value: Priced competitively, especially considering the included automation.

Cons

  • Learning Curve for Automation Setup: While intuitive, optimizing the feeder alignment takes a few cycles initially.
  • Specialized Nature: Its primary advantage is speed for specific tasks; for very delicate, multi-stage processes, other presses might be preferred.
  • Limited Included Shell Holders: While three popular ones are included, specific cartridges might require additional purchase.


Who Should Buy Lee Automatic Processing Press?

The Lee Automatic Processing Press is an absolute game-changer for reloaders focused on efficient component preparation. If you spend significant time depriming large batches of brass, sizing cast bullets, or performing primer pocket swaging, this press will revolutionize your workflow. It’s perfect for the diligent handloader who wants to accelerate the tedious parts of the reloading process without committing to a full progressive setup.

Anyone who reloads for pistol cartridges with cast bullets, or rifle cartridges requiring rapid depriming and resizing, will find immense value here. It’s also an ideal companion press for those with an existing progressive machine, allowing for faster bulk processing of brass or bullets. Hobbyists who enjoy tinkering and optimizing their reloading bench for maximum efficiency will appreciate its innovative design.

However, if your primary focus is on single-stage reloading of very delicate, bolt-action rifle cartridges where each step requires meticulous individual attention and adjustment, this press’s automation might be overkill. Those who prioritize absolute simplicity over speed, or who have very limited bench space and a need for a press that performs only the most basic single-stage operations, might find other options more suited. For anyone aiming to speed up their case prep or bullet sizing, this Lee model is a top contender, though you might want to consider stocking up on the specific X-press shell holders relevant to your most frequently reloaded cartridges.

Conclusion on Lee Automatic Processing Press

The Lee Automatic Processing Press is not just another reloading press; it’s a significant innovation in component processing. Its unique automation package, combined with solid construction and thoughtful ergonomics, delivers on its promise of speed and efficiency in a way few other single-stage presses can. For reloaders who prioritize getting through the often-monotonous tasks of depriming, sizing, and swaging with remarkable speed, this press is an outstanding investment.

The value proposition is exceptionally strong. For its price point, the level of automation and the quality of the included accessories are unheard of. It consistently punches above its weight, offering performance that rivals much more expensive machines for its specialized functions. The ability to integrate standard dies and shell holders further enhances its utility.

I would wholeheartedly recommend the Lee Automatic Processing Press to any serious handloader looking to reclaim time from their reloading process. If you’re tired of slow, manual component preparation, this press offers a genuinely automated solution that is both effective and surprisingly fun to use. It’s a smart, practical tool that makes a tangible difference in the reloading workflow.

Leave a Comment