MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts Review

The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts: First Use to Final Thoughts

As someone who spends an inordinate amount of time meticulously setting up optics for maximum performance, I’m always on the lookout for ways to improve the integration of my aiming systems. The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts caught my eye as a dedicated solution to bridge the gap between a high-end inclinometer and premium scope rings. My particular setup involves a Spuhr mount, which are renowned for their robust build and precise adjustments, and I wanted to integrate a reliable leveling device without compromising the integrity of the mount or the scope. The idea of mounting the Send iT MV3 directly and vertically seemed like a cleaner, more streamlined approach than the usual Picatinny rail attachments.

The initial draw to this bracket stemmed from a recent session where I noticed my scope’s cant wasn’t as consistent as I’d like across different shooting positions. While my previous methods worked, they felt a bit clunky and added unnecessary bulk. I considered a few universal cant indicators, but none seemed as purpose-built for the Spuhr ecosystem as this LRA offering. The promise of a direct, vertical mount felt like the elegant solution I’d been searching for, offering a discreet and secure attachment point for the inclinometer. My first impression upon unboxing was positive; the bracket itself felt solid, with a reassuring heft despite its small size.

Real-World Testing: Putting MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts to the Test

My testing grounds for this particular accessory were my usual workshop bench and the precision shooting range. I was keen to see how this bracket integrated with my existing Spuhr SP series mount, which is the cornerstone of my long-range rifle setup. The scenario involved removing the standard Picatinny rail adapter from my Send iT MV3 and fitting it onto the new bracket, which would then attach to the Spuhr mount. I meticulously followed the included instructions, paying close attention to the torque values and screw lengths as advised.

First Use Experience

The first use was primarily focused on the installation process itself. I found the bracket incredibly straightforward to attach to the Spuhr mount. The MDT instructions were clear, and the included 4mm x 10mm flat head screws seated perfectly. My biggest concern was ensuring the Send iT MV3 was properly seated before installing its securing screw. With the bracket in place, I carefully fitted the inclinometer into its designated pocket. It was a snug, precise fit, and confirming it was flush before tightening the # 8-32 flat head screw was essential. The entire process, from initial attachment to the Spuhr mount to securing the inclinometer, took less than ten minutes, which is a testament to its user-friendly design.

Extended Use & Reliability

After several range sessions and countless adjustments at the bench, this bracket has proven itself to be a remarkably reliable component. I’ve subjected my rifle to the usual bumps and vibrations associated with transport and handling, and the bracket has remained steadfast. There’s been no hint of loosening or shifting, which is critical for an accessory that directly impacts the accuracy of an inclinometer. The aluminum construction shows no signs of wear, scuffing, or any other degradation, even after being exposed to varying workshop temperatures and the occasional light dusting of propellant powder. Maintenance is practically non-existent; a quick wipe-down with a microfiber cloth is all that’s needed to keep it looking pristine. Compared to the bulkier alternatives that often require their own Picatinny rail space, this integrated solution is far superior in terms of both aesthetics and practical function.

Breaking Down the Features of MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts

Specifications

The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts is a compact yet crucial piece of hardware. It’s constructed from Aluminum, which contributes to its low weight and durability. The manufacturer, MDT, is known for producing high-quality shooting accessories, and this bracket is no exception. Its Black finish is aesthetically pleasing and matches well with most rifle components. Weighing in at a mere 0.054 lb, it adds negligible mass to the overall optic setup.

These specifications are vital because they highlight the bracket’s intended purpose: a lightweight, strong, and unobtrusive adapter. The aluminum construction ensures it won’t corrode or degrade easily, while the black color provides a tactical and discreet appearance. The minimal weight means it doesn’t negatively impact the rifle’s balance or handling.

Performance & Functionality

The primary function of the MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts is to provide a stable, vertical mounting platform for the Send iT MV3 inclinometer onto Spuhr SP, SA, SS, and ST series scope mounts. In this regard, it performs exceptionally well. The bracket creates a precise, secure fit that eliminates any potential for wobble or play, which is paramount for accurate cant readings. It effectively bridges the gap between the sophisticated engineering of Spuhr mounts and the advanced functionality of the Send iT MV3.

Its strength lies in its specialized design. It’s not a generic adapter; it’s built specifically for this mounting system. The only potential weakness, and this is more a limitation of the inclinometer itself than the bracket, is that the Send iT MV3 is sold separately, adding to the overall cost of the integrated leveling solution. However, considering the quality of both components, the combined performance is excellent and justifies the investment for serious shooters.

Design & Ergonomics

The design of this bracket is elegantly simple and highly functional. It’s essentially a precisely machined piece of aluminum designed to slot directly into the Spuhr mount’s accessory interface. The finish is a matte black that resists fingerprints and glare.

Ergonomically, the bracket is virtually invisible in use. Once installed, you don’t interact with it directly. Its design ensures the Send iT MV3 is positioned intuitively for quick glances during setup or while adjusting shooting positions. The tolerances are tight, which gives a feeling of high-quality manufacturing. There’s no discernible learning curve; it’s a “set it and forget it” component after initial installation.

Durability & Maintenance

In terms of durability, this bracket is built to last. The aluminum construction, coupled with MDT’s reputation for quality, suggests it will withstand the rigors of field use for years to come. I have experienced no issues with cracking, stiffness, or any form of material degradation.

Maintenance is almost a non-factor. A quick wipe-down is sufficient. The design is so robust that there are no obvious failure points beyond extreme abuse, which is unlikely given its intended use. It’s the kind of accessory that integrates seamlessly and requires no special attention beyond initial proper installation.

Accessories and Customization Options

The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts comes with the necessary (2) supplied 4mm x 10mm flat head screws for attachment to the Spuhr mount and (1) supplied # 8-32 Flat head screw for securing the Send iT MV3. The Send iT MV3 inclinometer itself is sold separately, which is important to note for anyone considering this setup.

Beyond the included hardware and the required inclinometer, there are no other significant customization options for the bracket itself. Its brilliance lies in its singular purpose: to provide a perfect vertical mount for the Send iT MV3 on specific Spuhr models. Its compatibility is strictly limited to Spuhr SP, SA, SS, and ST mounts.

Pros and Cons of MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts

Who Should Buy MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts?

This bracket is an ideal accessory for any shooter who utilizes Spuhr SP, SA, SS, or ST series scope mounts and wants to integrate a Send iT MV3 inclinometer for precise cant management. It’s perfect for competitive long-range shooters, PRS competitors, or anyone who demands the utmost accuracy and repeatability from their rifle system. If you value a clean, minimalist setup and appreciate purpose-built components, this is a must-have.

Shooters who do not own Spuhr mounts or are using a different brand of scope ring will unfortunately need to look elsewhere. Likewise, those who are not using a Send iT MV3 inclinometer will find this bracket unsuitable. For optimal performance, ensure you have the correct Spuhr mount and the Send iT MV3; purchasing a quality torque driver is also highly recommended for proper installation.

Conclusion on MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts

The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts is a finely crafted accessory that delivers exactly what it promises: a secure, stable, and vertically oriented mounting solution for the Send iT MV3 inclinometer onto compatible Spuhr scope mounts. Its aluminum construction, precise machining, and straightforward installation make it a standout component for those serious about rifle setup and performance. While the Send iT MV3 being sold separately adds to the initial investment, the combined functionality and clean integration are well worth the price for the intended user.

The value proposition here lies in the specialized engineering. You’re not buying a generic adapter; you’re investing in a component designed to work flawlessly within a high-end system. If you’re invested in the Spuhr ecosystem and require reliable cant indication, I would absolutely recommend this bracket. It’s a small part that plays a significant role in achieving consistent accuracy, and it does its job with quiet competence.