Rhino Rack Rubber Quick Mount Fit Kit Review

Was the Rhino Rack Rubber Quick Mount Fit Kit Worth It?

As someone who’s spent over a decade wrestling with gear in every conceivable environment, from the controlled sterility of a lab to the unforgiving grit of a workshop, I’m always on the lookout for components that promise efficiency and reliability. The Rhino Rack Rubber Quick Mount Fit Kit falls into a niche category – small, seemingly simple parts that are nonetheless critical to the integrity of a larger system. My particular need arose when I was reconfiguring my roof rack setup. The existing leg mounts on my older Rhino Rack system, while functional, felt a bit… static. I needed a way to ensure a more secure and less vibration-prone connection, especially for longer trips where road noise and jostling can take their toll.

My first impression upon unboxing these rubber bases was one of practical utility. They felt substantial, not flimsy, with a distinct rubber scent that spoke of decent material quality. The black finish is understated and, frankly, what you’d expect for undercarriage components. I briefly considered generic rubber pads from an automotive parts store, but the thought of potential fitment issues and unknown material durability quickly swayed me back to the manufacturer’s intended solution. My initial feeling was one of quiet satisfaction, a sense that these small pieces might just offer a significant improvement.


Real-World Testing: Putting Rhino Rack Rubber Quick Mount Fit Kit to the Test

First Use Experience

My testing ground for these fit kits was the familiar terrain of my garage and then, more importantly, the open road. I attached the rubber bases to my Rhino-Rack RLT600 legs, which then mounted onto my vehicle’s existing roof rails. The process was straightforward; the rubber pieces seated snugly within the designated recesses of the legs.

During my initial drive on a local route, I paid close attention to any new sounds or vibrations. I’m pleased to report that the difference was noticeable, even on this shorter run. The typical creaks and groans that sometimes accompany roof racks seemed to be significantly dampened.

Extended Use & Reliability

Several months and thousands of miles later, these rubber bases have proven their mettle. They’ve endured relentless sun, occasional downpours, and the constant vibration of highway travel without any visible degradation. There are no signs of cracking, splitting, or stiffness that I’ve sometimes encountered with lesser quality rubber components in similar applications.

Maintenance has been virtually non-existent. A quick rinse with a hose during a car wash is all that’s been required to keep them free of dirt and grime. They remain pliable and firmly in place, ensuring the legs of my roof rack maintain their secure connection to the vehicle. Compared to my previous experience with harder plastic or metal contact points on other rack systems, these rubber bases offer a superior balance of grip and vibration dampening.

Breaking Down the Features of Rhino Rack Rubber Quick Mount Fit Kit

Specifications

The Rhino Rack Rubber Quick Mount Fit Kit is precisely what its name suggests: a set of rubber bases designed to interface between the RLT600 legs and the roof of your vehicle or its crossbars. The kit contains four (4) of these rubber bases, ensuring you have enough for a standard four-leg setup. They are manufactured from rubber, a material chosen for its elasticity, grip, and shock-absorbing properties.

The color is a standard Black, which is practical for components that are typically out of sight and prone to accumulating dirt. The design is One Size, implying a universal fit within the RLT600 leg system. Each set weighs in at a mere 0.33 lb, contributing negligibly to the overall weight of your roof rack system. This weight is impressively low, especially considering the amount of protection and stability they offer.

These specifications are crucial because they directly impact the performance of your roof rack. The rubber material is key to preventing scratches on your vehicle’s paintwork and providing a crucial buffer against vibrations that can loosen fittings over time. The quantity of four means you’re getting exactly what’s needed for a typical setup, avoiding the need to mix and match or buy excess.

Performance & Functionality

In terms of its primary function, the Rhino Rack Rubber Quick Mount Fit Kit performs admirably. Its main job is to create a secure, non-slip, and protective interface for the RLT600 legs. This is achieved through the inherent grip of the rubber and its ability to conform slightly to uneven surfaces, ensuring consistent contact.

The key strength here is its effectiveness in reducing noise and vibration. I noticed a significant decrease in road noise, particularly on rougher asphalt, which made for a much more pleasant driving experience. The legs feel more ‘planted’ and less prone to shifting, instilling greater confidence when carrying heavy loads. A potential weakness, though minor, could be long-term exposure to extreme UV radiation in very hot climates, which might eventually lead to some hardening of the rubber. However, for typical use, this is unlikely to be a significant issue.

Design & Ergonomics

The design of these rubber bases is purely functional, which is exactly what you want for this type of component. They are shaped to perfectly slot into the RLT600 leg system, presenting a flat, broad surface for contact. There are no complex ergonomic considerations for the user, as they are not something you actively handle for extended periods; their design is all about seamless integration with the rack legs.

The build quality feels robust. The rubber is dense and appears to be of good quality, not the kind that easily tears or chunks. There’s a slight texture on the surface, which aids in grip. The finish is a matte black, which looks purposeful and blends in well with other undercarriage components.

Durability & Maintenance

Based on my experience, these rubber bases are built to last. They are designed to be a permanent fixture on the RLT600 legs, and their durability seems commensurate with the overall quality of Rhino-Rack products. I anticipate they will easily withstand the lifespan of the RLT600 legs themselves, barring any accidental damage.

Maintenance is virtually nil. As mentioned, a simple wash is usually sufficient. There are no moving parts to lubricate or delicate surfaces to worry about. Potential failure points would likely stem from external damage, such as being run over or being subjected to abrasive chemicals, rather than inherent material flaws.

Accessories and Customization Options

The Rhino Rack Rubber Quick Mount Fit Kit is an accessory in itself, designed to enhance the functionality of the Rhino-Rack RLT600 legs. It does not come with additional accessories, nor does it offer any customization options beyond its intended purpose. Its value lies in its direct application and the immediate benefits it provides to the existing leg system. There are no third-party modifications or aftermarket enhancements that are relevant to these specific rubber bases.

Pros and Cons of Rhino Rack Rubber Quick Mount Fit Kit

Pros

  • Significantly reduces roof rack noise and vibration, leading to a quieter and more comfortable drive.
  • Protects your vehicle’s paintwork from scratches and scuffs that can occur with direct metal-on-roof contact.
  • Enhances stability of the roof rack system by providing a more secure and consistent grip.
  • Durable rubber construction that withstands environmental exposure and continuous use.
  • Simple, no-hassle installation that requires no tools or special knowledge.

Cons

  • Not a standalone product; requires compatible Rhino-Rack RLT600 legs to function.
  • Limited aesthetic customization due to its functional design and black color.


Who Should Buy Rhino Rack Rubber Quick Mount Fit Kit?

This Rhino Rack Rubber Quick Mount Fit Kit is an essential purchase for any owner of Rhino-Rack RLT600 legs who prioritizes a quiet ride, vehicle protection, and maximum stability for their roof rack setup. If you frequently carry heavy loads, embark on long journeys, or are simply bothered by the typical noises associated with roof racks, these rubber bases are a worthwhile investment. They are ideal for anyone who uses their roof rack for anything from daily commutes carrying bikes or kayaks to extended overland trips with full roof-top tents.

Those who should skip this product are individuals who do not use the RLT600 leg system or those who have extremely basic rack needs and are not concerned about minor noise or potential paint abrasions. For users who might be considering a completely different brand of roof rack, these will naturally not be compatible. For maximum utility and peace of mind, pairing these with the Rhino-Rack RLT600 legs and ensuring your vehicle’s roof rails or specific mounting points are clean before installation is recommended.

Conclusion on Rhino Rack Rubber Quick Mount Fit Kit

The Rhino Rack Rubber Quick Mount Fit Kit may seem like a small, insignificant add-on, but its impact on the overall performance and user experience of a roof rack system is surprisingly substantial. For a modest price of $13.43, these four rubber bases deliver a noticeable improvement in noise reduction and stability, while crucially protecting your vehicle’s finish. They are a testament to how well-designed, simple components can elevate an entire setup.

The value proposition is exceptionally strong. Given the cost and the benefits derived, I wholeheartedly recommend these rubber bases to anyone using the RLT600 leg system. They are a small upgrade that makes a big difference, ensuring your adventures are quieter, safer, and your vehicle remains in better condition. If you’re investing in a quality roof rack system, don’t overlook these essential little components; they are a smart buy.

Leave a Comment