Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm Review

Unboxing & First Thoughts on the Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm

My quest for a more robust and reliable magazine extension for my Glock G19 led me to the Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm. I’ve been running an unmodified G19 for years, and while it’s never truly failed me, the desire to slightly increase magazine capacity without compromising reload speed or reliability has always lingered. The allure of a “+” magazine capacity without the bulk of a full-length extended magazine is a constant temptation for many Glock owners. I’ve tried other solutions in the past, including polymer extensions that felt flimsy, and frankly, they often introduced more problems than they solved. This particular aluminum option from Strike Industries promised a blend of enhanced capacity, durability, and a sleek aesthetic that caught my eye.

The catalyst for this specific purchase was a recent range day where I found myself wishing for just a couple more rounds in my magazine during a series of drills. Reaching for a fresh mag felt just a hair too slow, and while it wasn’t a critical failure, it was enough to plant the seed of considering an upgrade. I’d seen the Strike Industries aluminum plates on other builds and they generally struck me as a good balance between aggressive styling and functional engineering, a niche Strike Industries often occupies. My primary concern was always about smooth magazine insertion and extraction, especially under stress, and the “slow drag/no snag” marketing claim definitely resonated.

Upon receiving the package, my initial impression was positive. The plate itself felt solid, a significant departure from the lighter, more pliable polymer versions I’d encountered previously. The machined aluminum had a good heft to it, and the anodized finish appeared uniform and well-applied, with no obvious tool marks or blemishes. It had that satisfyingly precise feel that often comes with CNC-machined parts. I’d briefly considered a few other manufacturers, but the combination of the 6061-T6 aluminum construction and the integrated aluminum locking plate on the SI offering pushed it to the top of my list. My first reaction was one of cautious optimism; it looked and felt like a quality piece that could hold up to rigorous use.


Real-World Testing: Putting Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm to the Test

My testing environment for this magazine extension was primarily at my local indoor shooting range and during dry-fire practice sessions at home. I wanted to simulate typical defensive and recreational shooting scenarios where a quick and efficient magazine change is paramount. The extension was fitted to a standard Glock 19 magazine, and I made sure to cycle it through multiple reloads, both from a stable shooting stance and during more dynamic movement drills.

First Use Experience

The initial installation was straightforward, requiring me to remove the factory floor plate and slide on the Strike Industries aluminum extension. It locked into place with a satisfying click, and I immediately noticed the added surface area at the base of the magazine. During my first few reloads on the range, I intentionally performed them somewhat briskly. The added lip of the extension made guiding the magazine into the mag well noticeably easier, especially when my hands were slightly slick from exertion or atmospheric humidity. I experienced no initial snags or hesitations during these first few magazine changes.

I also paid close attention to how the extended magazine seated and dropped free. Unlike some older polymer extensions that could bind up or feel loose, this aluminum unit provided a very secure fit with the magazine body. Dropping the magazine from a closed slide yielded a clean and unimpeded release, a critical factor for any speed-oriented application. The only minor surprise was the slight increase in the overall weight of the loaded magazine, which is to be expected given the aluminum construction, but it’s a trade-off I was willing to make for the perceived durability and capacity increase.

Extended Use & Reliability

After several weeks of use, including two more extended range sessions and countless dry-fire drills, the Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm has proven itself to be a reliable performer. The anodized finish has held up remarkably well, showing only minor scuffs from being dropped on the range floor (an inevitable part of real-world testing). There are no signs of cracking or structural compromise, which speaks volumes about the 6061-T6 aluminum it’s machined from. The locking mechanism remains secure, and the plate hasn’t loosened or shifted despite the recoil and magazine drops.

Cleaning and maintenance are as simple as cleaning a standard Glock magazine. The plate doesn’t trap excessive dirt or debris, and any grime that accumulates can be easily wiped away with a cloth. I haven’t needed to disassemble the magazine from the plate for cleaning, as it seems to maintain its integrity without requiring that level of intervention. Compared to some of the plastic extensions I’ve used in the past that would eventually warp or split, this aluminum unit feels like it’s built to last. It offers a tangible improvement in magazine handling over standard floor plates, especially when reloading under pressure, and the added capacity is a welcome bonus.

Breaking Down the Features of Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm

Specifications

The Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm is meticulously crafted from 6061-T6 aluminum, a material prized for its strength-to-weight ratio and corrosion resistance. This robust construction ensures durability and longevity, even under demanding use. The plate is designed to add a plus 5 round capacity for 9mm ammunition, bringing the total capacity of a standard Glock 19 double-stack magazine to an impressive 23 rounds. It features an anodized finish, which not only provides a sleek aesthetic but also offers an additional layer of protection against wear and tear.

A key component of this extension is the included aluminum locking plate, which enhances the security of the magazine base and prevents accidental detachment. The design emphasizes a “low drag / no snag” profile, meaning its rounded edges and streamlined form are less likely to catch on clothing or holsters during a draw or reload. This specific model also adheres to the USPSA 140mm race division limit, making it suitable for competitive shooters who operate within these regulations. Its dimensions are engineered to work seamlessly with OEM double-stack Glock 19 magazines, ensuring proper fitment and function.

Performance & Functionality

The primary function of the Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm is to increase magazine capacity while maintaining or improving reload efficiency. In this regard, it performs exceptionally well. The added capacity means fewer magazine changes during extended shooting sessions or defensive scenarios, a significant tactical advantage. The low drag / no snag design truly lives up to its name; I found that the extension glided smoothly over the lip of my holster and my magazine pouch during reloads without any noticeable catching or resistance.

The performance improvement in magazine insertion is perhaps its most impactful feature. The larger surface area of the aluminum plate provides a more substantial target for the magazine to seat into the firearm’s mag well. This translates to faster and more confident reloads, especially when performed under duress. While some users might experience a slight learning curve in adjusting to the feel of the heavier loaded magazine, the functional benefits far outweigh this minor adjustment. The extension’s design doesn’t interfere with the magazine’s ability to drop free, which is a critical aspect of rapid reloads. It successfully bridges the gap between a standard capacity magazine and a cumbersome extended magazine.

Design & Ergonomics

The design of the Strike Industries aluminum EMP is both aggressive and functional. The machined aluminum gives it a premium feel, and the anodized finish (mine is black, but other colors are available) complements the aesthetics of the Glock platform nicely. The geometric patterns machined into the plate add a modern, tactical look without being overly gaudy. Ergonomically, the plate’s larger surface area at the base of the magazine significantly aids in gripping and manipulating the magazine during changes.

The low drag / no snag design philosophy is evident throughout its construction. Rounded edges and a generally smooth contour prevent it from catching on clothing or equipment. This is crucial for concealed carry or tactical applications where a smooth draw and reload are essential. The addition of the aluminum locking plate provides a secondary layer of security, ensuring the extension stays firmly attached to the magazine body, even through significant recoil and drops. The overall build quality feels robust, conveying a sense of confidence that it will withstand the rigors of hard use.

Durability & Maintenance

Durability is where the Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm truly shines. Constructed from 6061-T6 aluminum, it’s inherently more resilient than plastic alternatives. After numerous range sessions, including dropped magazines on concrete, the plate has shown no signs of cracking, deformation, or structural weakness. The anodized finish is tough and resistant to scratches, though very hard impacts can eventually leave minor cosmetic marks. This level of durability is precisely what I was looking for to replace less robust polymer options.

Maintenance is minimal, which is a significant advantage. Cleaning involves the same process as cleaning a regular Glock magazine; a quick wipe-down with a cloth is usually sufficient to remove dust or debris. The aluminum construction doesn’t retain dirt or moisture in the way that some textured plastics might. There are no complex parts to worry about; the plate is a single, solid piece that attaches securely to the magazine. The only potential concern might be over-tightening during installation if a user were to attempt to force it, but with proper installation, it’s a worry-free component.

Accessories and Customization Options

The Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm comes as a complete unit, including the essential aluminum locking plate that enhances security. No additional accessories are typically required for its installation and function. Strike Industries generally produces accessories with a high degree of compatibility, and this EMP is designed to work with OEM Glock 19 magazines. While not an accessory, the fact that it meets the USPSA 140mm race division limit is a crucial customization consideration for competitive shooters.

The plate itself offers a visual customization option, with various anodized colors often available, allowing users to personalize their firearm’s look. Beyond aesthetics, its primary functional customization is the plus 5 round capacity, which is a direct enhancement to the magazine’s utility. There are no other user-replaceable parts on the extension itself, making it a straightforward, durable addition to a magazine rather than a modular system requiring numerous add-ons.

Pros and Cons of Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm

Pros

  • Enhanced Capacity: Adds a plus 5 round capacity to standard 9mm Glock 19 magazines, providing more ammunition before needing a reload.
  • Robust Construction: Machined from 6061-T6 aluminum for exceptional durability and resistance to damage from drops or heavy use.
  • Improved Reloads: The low drag / no snag design and increased surface area at the base of the magazine significantly aid in faster, more confident magazine insertions.
  • Secure Fit: Includes an aluminum locking plate for added security, ensuring the extension stays firmly attached to the magazine.
  • Aesthetically Pleasing: The sleek, aggressive design and anodized finish complement the look of the Glock firearm.
  • Meets Competition Standards: Complies with the USPSA 140mm race division limit, making it a practical choice for competitive shooters.

Cons

  • Slightly Increased Weight: The aluminum construction adds a bit more weight to the loaded magazine compared to standard configurations.
  • Price Point: It is more expensive than basic polymer magazine extensions.
  • Potential for Cosmetic Marks: While durable, hard impacts on concrete can potentially leave minor cosmetic scratches on the anodized finish.


Who Should Buy Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm?

This Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm is an excellent choice for Glock 19 owners who prioritize enhanced magazine capacity and improved reload speed. It’s ideal for range shooters looking to spend more time sending rounds downrange and less time on magazine changes. Competitive shooters, particularly those participating in divisions with capacity limits like USPSA’s 140mm division, will find its compliance and performance valuable.

It’s also a strong contender for individuals who carry a Glock 19 for self-defense and want the tactical advantage of extra rounds without resorting to bulky extended magazines. Anyone frustrated with flimsy polymer extensions or seeking a more durable, aesthetically pleasing, and functional magazine base pad would be well-served by this aluminum option. Those who demand robust, reliable firearm accessories that can withstand regular use and potential abuse will appreciate its build quality.

However, individuals seeking the absolute lightest magazine setup or those on a very tight budget might consider looking at less expensive polymer alternatives. If the goal is purely to increase capacity for casual plinking and capacity is the only concern, a standard extended magazine might suffice, though it will likely be bulkier. For optimal performance, ensuring you are using quality OEM Glock 19 magazines is recommended, as the extension is designed to work with their tolerances.

Conclusion on Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm

The Strike Industries Aluminum Extended Magazine Plate for Glock G19 9mm is a well-engineered and robust upgrade for any Glock 19 owner. It successfully balances increased magazine capacity with improved handling and durability, addressing many of the shortcomings found in less expensive alternatives. The 6061-T6 aluminum construction provides peace of mind regarding its longevity, and the low drag / no snag design genuinely enhances reload speed and confidence.

For its price point of $39.99, the value proposition is strong, especially when you consider the enhanced functionality, durability, and competition compliance it offers. It’s a significant improvement over standard floor plates and a more practical, durable option than many polymer extensions. I wholeheartedly recommend this magazine extension to anyone looking to subtly boost their Glock 19’s capabilities without compromising reliability or aesthetics. It’s a smart investment for those who demand quality and performance from their firearm accessories.

Leave a Comment